Permanently Closed Marketplace Sales Thread

[laur.laurix]

Found the problem. The problem was the avast web shield and a win application related with tcp management. So u were spot on. It is odd because it runned like a charm until few months ago.Any suggestion for an AV with real time protection that doesnt affect sb ?

Sounds good. Error 0 is a odd sort of error, it means there was a tcp error but that windows doesn't know what it was. In your case it could be security software triggering based on some content or the ulr its self for example, so try it with your A/V uninstalled as a test, as you noted.

It could be some other issue. For instances on 1 of my VPS I recently pushed the connections limit that windows can handle too high, so there was no buffer space available, aka no connections could be made. I was running a load of things at once, but its just the point that sometimes its something simple like that.

 

[loopline]

i am new to scrapeboX so, can you please tell me how many connection will be suitable for faster poster on 8GB RAM on 10Mbps

10Mbit is dencet so its probably going to depend on the max simultaneous connections your proxy provider allows. Proxy providers typically set a cap so check with them, usually its 10 connections per proxy. But at a point with only 10Mbit and fast poster your going to fill that pipe as you can chew up a lot of bandwidth with downloading and posting to web pages. It would also depend on the max page size etc.. that you have set. Start at whatever the cap you provider sets and then work backwards, if you have no place to start Id guess that you wont' be able to exceed 100 connections, possibly not even 50 connections, you may land in the 20-30 range.

Found the problem. The problem was the avast web shield and a win application related with tcp management. So u were spot on. It is odd because it runned like a charm until few months ago.Any suggestion for an AV with real time protection that doesnt affect sb ?

I use comodo, but you have to set it up to trust Scrapebox or it will block it.

 

[IceManCat]

Hi how can I maximize the amount of comments I can post after I have harvested URL's? It says 161 under List Mode and it seems like this is the maximum.

 

[doubleoo]

First, the issues with your proxies. Did you save your real IP address in your proxy providers dashboard to authenticate your PC with their system to allow you to use the proxies? If not you need to do that.

Second, if you were given a free license from a friend or bought a license off someone and not from us then you will need to contact whoever you bought it from for support for the license. We do not support reselling/swapping/trading licenses.



There's currently no issues with the Google harvester, i just done a test and got fast speeds. The screenshot shows you have 52 footprints, maybe these footprints are very specific and dont have a lot of results. Also you are using over 2k free server proxies as well, these are working proxies not tested against Google. They are good for usage in just about every search engine "except" the one you are using them for. If you have 100 private proxies i'd drop the connections from 500 to something more reasonable and remove the 2k free proxies.

I bought the license and have the registration details. I've also purchased a premium plugin with my personal PayPal and got it activated. However, I was only trying to change the registrant details since I've purchased the licence. If that's out of the service you provide, then no worries. Have you noticed what i said as regards the Javascrip issue on manual comment poster?

 

[doubleoo]

First, the issues with your proxies. Did you save your real IP address in your proxy providers dashboard to authenticate your PC with their system to allow you to use the proxies? If not you need to do that.

Second, if you were given a free license from a friend or bought a license off someone and not from us then you will need to contact whoever you bought it from for support for the license. We do not support reselling/swapping/trading licenses.



There's currently no issues with the Google harvester, i just done a test and got fast speeds. The screenshot shows you have 52 footprints, maybe these footprints are very specific and dont have a lot of results. Also you are using over 2k free server proxies as well, these are working proxies not tested against Google. They are good for usage in just about every search engine "except" the one you are using them for. If you have 100 private proxies i'd drop the connections from 500 to something more reasonable and remove the 2k free proxies.

I bought the license and have the registration details. I've also purchased a premium plugin with my personal PayPal and got it activated. However, I was only trying to change the registrant details since I've purchased the licence. If that's out of the service you provide, then no worries. As regards the private proxies, i did everything as instructed by the CS, yet failed the test. Have you noticed what i said as regards the Javascrip issue on manual comment poster?

 

[loopline]

Hi how can I maximize the amount of comments I can post after I have harvested URL's? It says 161 under List Mode and it seems like this is the maximum.

Im probably missing something really obvious, but I don't follow. Where do you see 161? You can post as many comments as you can scrape links? Perhaps a screenshot?

 

[dikkill]

One question regarding the export the url from the harvester to a text file in V2. When i load that file in GSA to identify the platforms, it just passes everything. But if i import it into SB V1 and than export it to a text file, GSA process the list without a problem.
So there seems to be something in the export? Do i need to select something else?

 

[softtouch2009]

One question regarding the export the url from the harvester to a text file in V2. When i load that file in GSA to identify the platforms, it just passes everything. But if i import it into SB V1 and than export it to a text file, GSA process the list without a problem.
So there seems to be something in the export? Do i need to select something else?

Just export the list as ANSI format.

 

[bughumm]

Now, I just sit back and start using this program again. However, program cannot start properly for some reason. How to fix this?

 

[loopline]

One question regarding the export the url from the harvester to a text file in V2. When i load that file in GSA to identify the platforms, it just passes everything. But if i import it into SB V1 and than export it to a text file, GSA process the list without a problem.
So there seems to be something in the export? Do i need to select something else?

As softtouch noted, the default export format is Unicode in Scrapebox V2. GSA is written in Delphi like Scrapebox is, however its written with an older compiler of Delphi, just like Scrapebox V1. So in short GSA does not support Unicode or utf-8 files.

So in Sbox V2 go to options >> default file export format - and set this to ANSI that way when you export files your just exporting in a format GSA can read.

Now, I just sit back and start using this program again. However, program cannot start properly for some reason. How to fix this?

Can you elaborate? Does it never start at all, does it start but give an error, does it not submit your activation or what?

Perhaps mailing support would be ideal:

scrapeboxhelp (at} gmail [dot) com

Send them a screenshot if you can.

 

[Sweetfunny]

There's a new addon available for users of ScrapeBox v2

ScrapeBox Anchor Text Checker Addon v2.0.0.0

The ScrapeBox Anchor Text Checker allows you to enter your domain and then load a list of URL's that contain your backlink. It will scan all the URL's containing your link and extract the anchor text used by the websites that link to you. At the end you can view all anchor texts, and see how many occurrences of each specific anchor text and what percentage each anchor text accounts for.

Main GUI:

Statistics:

You can also export a text file containing the website URL and anchor text, or export all stats as an .xlsx file to view in Excel. Additionally you can use proxies, extract anchor texts linked to the specific URL you enter or all anchor texts to your domain. It can also work with URL's that have multiples links and anchors on the one page, and you can select if you want to treat anchor texts as case sensitive or not

This addon is ideal for checking your anchor text diversity and ensuring you have not overused keywords when link building.

This addon is provided free of charge for registered ScrapeBox users.

 

[checkerger]

Hallo, I am interested in your SB. I have the following question.

Can I use ScrapeBox to autopost on only .de TLDs having a pre-written custom comment for each blogcomment? I want it to post each comment I prepared only once and never again.

Regards

 

[rebornishard]

Hello loopline, i curious about something
sb able to find forum, but how we use it ?
make a profile page for it ?
thanks

 

[loopline]

Hallo, I am interested in your SB. I have the following question.

Can I use ScrapeBox to autopost on only .de TLDs having a pre-written custom comment for each blogcomment? I want it to post each comment I prepared only once and never again.

Regards

You could filter the list by the .de tld, thats no issue. But its not going to post a comment only once and then never again, unless your loading in only 1 at a time, but of course thats not practical. You could use the manual poster perhaps, but it depends on the volume your looking to do.

Hello loopline, i curious about something
sb able to find forum, but how we use it ?
make a profile page for it ?
thanks

Scrapebox doesn't support sites that require authentication. So you would need to manually do it or load it into another program that can do it. Assuming your goal is to build links on the forum.

 

[Deleted member 813988]

I need to send ads to people that like certain pages on Facebook.
Facebook ads doesn't allow me to show ads to people, they want me to choose interest instead (which is bullsh..).

Can I use scrapebox to scrape users from certain groups and then upload this list of users to Facebook ads tool?

Thanks

 

[apex1]

How do I scrape google results for only the past 24 hours or 1 week etc?

I don't see that in SBv2.0.0.41

 

[apex1]

I tried it out in V1 but it's saying my IP is blocked.. I know my IP is fine because:

1) I haven't done any scraping at all yet

2) I can search it manually

Any idea why it's saying I'm blocked when I do the 24 hour search?

 

[loopline]

I need to send ads to people that like certain pages on Facebook.
Facebook ads doesn't allow me to show ads to people, they want me to choose interest instead (which is bullsh..).

Can I use scrapebox to scrape users from certain groups and then upload this list of users to Facebook ads tool?

Thanks

Im not a facebook ad expert, but I "think" you need to upload email addresses to facebook and let facebook convert them to facebook ids in order to target them specifically, or am I wrong?

I mean you may be able to scrape what you want from facebook, but that doesn't mean facebook will let you upload and target them. So first find out what facebook will let you target, then tell us specifically what that is and what you need to scrape, along with examples.

I tried it out in V1 but it's saying my IP is blocked.. I know my IP is fine because:

1) I haven't done any scraping at all yet

2) I can search it manually

Any idea why it's saying I'm blocked when I do the 24 hour search?

Google does perma ban some ip ranges, so it could be that.

Also when you search it manually your using javascript and Scrapebox can not use javascript, so that changes things.

Try V2, but it sounds like you may need proxies.

How do I scrape google results for only the past 24 hours or 1 week etc?

I don't see that in SBv2.0.0.41

Go to settings >> harvester engines configuration >> Import >> download default engines from server - this will give you the prebuilt 24 hour engine, but you could just build your own as well.

 

[dikkill]

Is there a simple way to filter a list of urls? I would like to remove adult,casino ect from my main list.

 

[scrapefox]

Is there a simple way to filter a list of urls? I would like to remove adult,casino ect from my main list.

-Create a list of words that you want to look for and remove.
-Import your current list.
-Under "manage lists" select "remove/filter" and then "remove urls containing entries from..."
-Select your "bad words" list.

This will check all the URLs in your imported/harvested list for any of the words you've listed.

This only checks the URL and not the actual content of the page, so some might slip through, but I find it does get the majority of them with a decent list of keywords.