Permanently Closed Marketplace Sales Thread

[loopline]

Hey loop, do you know why link extractor keeps crashing when there's too many URLs? Is there a temp file where I can still save my links?

Great video by the way, thanks!!

no temp file. The difference between the old one and the new one is that the old one did not support relative links, where as the new one does. So the new link extractor has the potential to extract a Lot more links then the old one did. That said, it may gain more urls more quickly which can cause it to run out of memory. So just try working with smaller batches. Meaning if you used to load in 20K list, load in 10K or 5K.

Now you can extract all the links from those pages that you were not able to extract before, so while it may seem a pain to load in smaller lists, its because your getting back more urls from the lists then you use to.

I have a quick pre purchase question. I am looking to buy scrapbox right now. I have found a few different offers and discounts on the web, is there a difference (besides in price) if I buy it here or from kingwarrior, or warrior form or anywhere else on the web? I see its 5 dollars cheaper from kingwarrior is it safe to go that route?

There are only 3 urls at which you can purchase scrapebox from:

http://www.scrapebox.com - $97

http://www.scrapebox.com/bhw - $57
http://www.scrapebox.com/cheapskate - $57

Hi loopline, I'd have another question. I read a note that the Ping Feature can be used to inflate pages, and videos too. How can I handle a YT video or a SoundCloud audio, considered that those pages do require the user to "stay on page" for a few minutes?

Shhh your giving away all my secrets, LOL. Yes I have tested it and it inflates YT views nicely, I have not tested it with inflating the SoundCloud views, but I would "presume" it should be fine. Just use the delay, set it to RND, as I note in the video. Then go to settings and set the RND delay range to whatever you want. If thats not long enough you can manually open the ini file, which is located in your configuration folder - inside your main scrapebox folder - its called scrapebox.ini

Look for:

RndDelayMin=1
RndDelayMax=2

Those numbers on the end are seconds. So if you wanted it to stay on a youtube video for between 2 mins and 5 mins you set it to

RndDelayMin=120
RndDelayMax=300

Now that I told you how to do it, stop giving away my secrets before I have a chance to record a followup video on them and take all the credit for it. HAHA! Just kidding.

P.S. Also once you mod and save the ini file, which you should do with scrapebox CLOSED down - don't go back to the RND menu under settings - else when you go back to it, its likely going to kick you back to within the 1 min time frame and mess up your mod.

 

[proxygo]

I have a quick pre purchase question. I am looking to buy scrapbox right now. I have found a few different offers and discounts on the web, is there a difference (besides in price) if I buy it here or from kingwarrior, or warrior form or anywhere else on the web? I see its 5 dollars cheaper from kingwarrior is it safe to go that route?

just buy it from s/box website or bhw you wont go wrong

 

[lendir]

hi loopline...can you tell me how to setup the api for backlink checker addons? i just move to my home pc but now its gives me 401 error everytime i use the addons...the format its like this member-16xxxxx|f342ea544ce5bxxxxxxxxx4824d00 .is this correct?

 

[graffe]

I am burning through my proxies atm. Not a single private list work, all my privates burn out after next to nothing :s
Anyone getting this?

Costing me way to much to run one harvest.

 

[briptech]

Shhh your giving away all my secrets, LOL. Yes I have tested it and it inflates YT views nicely, I have not tested it with inflating the SoundCloud views, but I would "presume" it should be fine. Just use the delay, set it to RND, as I note in the video. Then go to settings and set the RND delay range to whatever you want. If thats not long enough you can manually open the ini file, which is located in your configuration folder - inside your main scrapebox folder - its called scrapebox.ini

Look for:

RndDelayMin=1
RndDelayMax=2

Those numbers on the end are seconds. So if you wanted it to stay on a youtube video for between 2 mins and 5 mins you set it to

RndDelayMin=120
RndDelayMax=300

Now that I told you how to do it, stop giving away my secrets before I have a chance to record a followup video on them and take all the credit for it. HAHA! Just kidding.

P.S. Also once you mod and save the ini file, which you should do with scrapebox CLOSED down - don't go back to the RND menu under settings - else when you go back to it, its likely going to kick you back to within the 1 min time frame and mess up your mod.

Ah ah thanks dude, that sounds pretty good. Thanks also for the "ini file" hint: it's pretty amazing

Unfortunately, the pings I have sent yesterday - with my 40 private proxies - have not been recorded by GA
I have to try with other proxies... I think THAT is the issue... what do you think? what are your experiences while trying to inflate GA?

Thanks again!

 

[RyanGibbs]

Hi Sweetfunny,
first off - many thanks for the continued work on Scrapebox, it simply is one of the most versatile SEO tools in existence. That being said I've got 2 suggestions which in part at least have been voiced on the forum by others as well and which I think make a lot of sense:

Scrapebox D0follow Test addon - expand functionality to allow for d0follow checking target sites for more than just a single website.

Reasoning: Most users blast links to a large variety of websites per session. Doing d0follow checks for a lot of websites after a blast is a very slow and tedious process. (Alternatively the new Scrapebox LinkChecker could perhaps be expanded to also check for d0follow/n0follow??)


Link Extractor addon(s) - expand functionality to create txt file dumps in the same way the Harvester does and make sure the extractor can deal with very large extraction projects per session. Meaning it should optimally be able to extract and dump links from a list of just under 1 million target sites per session.

Reasoning: At current either one of the link extractors can at the very most be fed ~20k urls to extract links from before they will crash. This makes for very slow going with big extraction projects. And an added pain of course is that after a crash there is no way to recover the links that were extracted up until the crash...

Hoping these are both in the realm of the possible and can make it onto the update lists at some stage.

Thanks again for all the great updates to-date.

 

[loopline]

hi loopline...can you tell me how to setup the api for backlink checker addons? i just move to my home pc but now its gives me 401 error everytime i use the addons...the format its like this member-16xxxxx|f342ea544ce5bxxxxxxxxx4824d00 .is this correct?

You have it right

memberID|api

so

member-16xxxxx|f342ea544ce5bxxxxxxxxx4824d00

is correct.

However the 401 is essentially MOZ blocking your request. So make sure your using the most up to date version of the addon first. Then Try adding a proxy to see if they have just banned your IP for some reason.

Failing that try creating a new moz account to test to see if maybe they banned your account for some reason.

I am burning through my proxies atm. Not a single private list work, all my privates burn out after next to nothing :s
Anyone getting this?

Costing me way to much to run one harvest.

It sounds like your going to fast. I can harvest over 100 million urls with less then 40 private proxies, in 1 week, and not get the ips banned. Here is a video on how to safely use private proxies:
http://www.youtube.com/watch?v=Ri6cci288vk

Ah ah thanks dude, that sounds pretty good. Thanks also for the "ini file" hint: it's pretty amazing

Unfortunately, the pings I have sent yesterday - with my 40 private proxies - have not been recorded by GA
I have to try with other proxies... I think THAT is the issue... what do you think? what are your experiences while trying to inflate GA?

Thanks again!

Your welcome, happy to help.

Hmm Im drawing blank, its probably obvious, but what is GA? The proxies may quite well be the issue, if the page loads slow then adding a delay of enough time for the page to fully load, may be needed.

 

[The Profit Bird]

I'm in for this piece of cake

 

[loopline]

I'm in for this piece of cake

Ill have chocolate cake please, with white butter cream icing.

It seems you like your cake iced with forum spam.

 

[scrapefox]

Been away for a while, but just wondering if there's a problem with Scrapebox's trackback function at the moment?

When I choose the trackbacks option, the excerpts box doesn't become active? I admit it's very possible I've just missed something.

 

[tahworld]

no temp file. The difference between the old one and the new one is that the old one did not support relative links, where as the new one does. So the new link extractor has the potential to extract a Lot more links then the old one did. That said, it may gain more urls more quickly which can cause it to run out of memory. So just try working with smaller batches. Meaning if you used to load in 20K list, load in 10K or 5K. Now you can extract all the links from those pages that you were not able to extract before, so while it may seem a pain to load in smaller lists, its because your getting back more urls from the lists then you use to.

Thanks loop Was able to push it to 100k with your suggestion

 

[tahworld]

Hey loop,

On behalf of everyone you've helped in this thread:

http://www.virtualtrophies.com/trophy/view/43e05693/

 

[tahworld]

Been away for a while, but just wondering if there's a problem with Scrapebox's trackback function at the moment?

When I choose the trackbacks option, the excerpts box doesn't become active? I admit it's very possible I've just missed something.

Hey what do you mean by excerpts?
Do you mean Comments?
Trackbacks don't have comments.
Let me know if you meant something else, maybe I can help.

 

[tahworld]

Did anyone mention cake?

 

[scrapefox]

Hey what do you mean by excerpts?
Do you mean Comments?
Trackbacks don't have comments.
Let me know if you meant something else, maybe I can help.

No, I don't mean comments.

When I select the trackbacks option in the comment poster module I get the following:

As you can see the fields that become active are names, websites, and bloglists.

Admittedly I haven't used scrapebox for a few months, but previously the 4th input box would request excerpts, also the names input box wouldn't be active.

 

[BuritoBandito]

Hey loopline, where do you get the best cheap private proxies from?

 

[scrapefox]

Just to add to the trackbacks problem, it only seems to be happening in 1.16.2 managed to download 1.16.0 and it's working fine, don't have 1.16.1 to test it.

 

[itsmytime]

I am having a license problem. I tried to transfer my scrapebox license to my newly installed VPS and a message was sent to my email that the transfer has been successful, yet the software is still saying "No Valid License Found". Is there a way I can have this resolved?

 

[scrapefox]

I am having a license problem. I tried to transfer my scrapebox license to my newly installed VPS and a message was sent to my email that the transfer has been successful, yet the software is still saying "No Valid License Found". Is there a way I can have this resolved?

Have you restarted scrapebox since the license was transferred?

 

[briptech]

Hmm Im drawing blank, its probably obvious, but what is GA? The proxies may quite well be the issue, if the page loads slow then adding a delay of enough time for the page to fully load, may be needed.

No worries mate
GA stands for Google Analytics: it is not being "inflated" by this feature (but as I said, it could be due to my proxies).