Permanently Closed Marketplace Sales Thread

[Darksider]

Anybody use RankTracker Plugin? I would like to know whether it is any difference between SerpBook or Serp Explorer.

 

[Ghoro]

I would recommend some shared/private proxies, yes. With google so tight, public proxies that work with operators are hard to find. That or you could use your own IP and set it to a random delay between 45 sec and 1 min and that would "probably" work although it would be slow, but if you let it run while you sleep it probably isn't so bad if your not doing a lot.

So I did get 5 private proxies to try and do number search range like "site:url.com + $40..$80 + Keyword" and set it to only have 1 connection at a time and after getting only about 2000 urls all 5 of my private proxies got blocked by Google. However before trying it I did search on these forums for the best way to use private proxies with ScrapeBox, but everyone was saying that all you need is a random delay of 1 to 3 sec, which is what I did, but I now see you said to use more of a random delay between 45 sec and 1 min. I believe that my private proxies are not completely dead and I just need to give it a few hours, but even if not I can get 5 fresh proxies from my proxy provider, but when I do get 5 working proxies again will adding a delay of 45 sec and 1 min or maybe even higher, I'm fine with it taking a few days as long as it gets the job done without getting blocked, make a difference or is it more likely that Google will instantly block them again after just a few harvest and I should just give up on the idea of using "site:url.com + $40..$80 + Keyword"? Also would it maybe make a difference if I removed "site:url.com" and just had "$40..$80 + Keyword"?

Also I can't seem to get it to work, but is there any way to do a number search range like "$40..$80 + Keyword" for search engines other then Google, so for AOL, Bing and Yahoo? Really for what I am trying to do it's not that dependent on it needing to be Google and it sounds like the other search engines are less ban happy, but I can't find anyway to do "$40..$80" in other than Google.

Thanks

 

[tahworld]

v1.16.2

Hey Sweetfunny, Thank you so much for the update! It's amazing as always!! It's really cool how you/the scrapebox team keeps updating after years. I literally don't know many companies (even outside of SEO) that care like that about their customers AFTER they've purchased the product. Anyone who hasn't bought scrapebox yet, I would definitely recommend it!!!!!! It's simply amazing, even after all these years.

Also question for loop: is email still the best way to contact you? I have a question if you don't mind

 

[tahworld]

trial version available ? and do we need to captcha killer or something like that for mass posting ?

I don't think there's a trial, but trust me, you will love Scrapebox. Just don't give up if you have trouble understanding it at first, it's amazing once you understand it.

Captcha is optional, you don't need it, but it will increase your post-count.

 

[tahworld]

Guys, when you're harvesting using a large keyword list and you stop scrapebox, is there a way to continue scraping from the last harvested keyword?

Not that I know of (I could be wrong), but you can see where it stopped in the results menu when you click stop, it should turn from green rows to red rows.

 

[tahworld]

Hey

Please repair WHOIS Scraper, i need it urgently...

Thank You very much!

Hey I just checked, it's working for me. Can you explain what's not working? Maybe I can help you.

 

[loopline]

v1.16.2

Hey Sweetfunny, Thank you so much for the update! It's amazing as always!! It's really cool how you/the scrapebox team keeps updating after years. I literally don't know many companies (even outside of SEO) that care like that about their customers AFTER they've purchased the product. Anyone who hasn't bought scrapebox yet, I would definitely recommend it!!!!!! It's simply amazing, even after all these years.

Also question for loop: is email still the best way to contact you? I have a question if you don't mind

Email is best, although you can pm me here too. Im in the middle of selling my house at the moment and we have an offer and inspection is monday and my life is a bit upside down. Wife is sick, 10 month old is still sick and all that jazz as well. So Im just behind on my personal email, when I have to choose between it and sleep, I try and do it but when I wake up on my desk more then once I call it quits, lol.

So I did get 5 private proxies to try and do number search range like "site:url.com + $40..$80 + Keyword" and set it to only have 1 connection at a time and after getting only about 2000 urls all 5 of my private proxies got blocked by Google. However before trying it I did search on these forums for the best way to use private proxies with ScrapeBox, but everyone was saying that all you need is a random delay of 1 to 3 sec, which is what I did, but I now see you said to use more of a random delay between 45 sec and 1 min. I believe that my private proxies are not completely dead and I just need to give it a few hours, but even if not I can get 5 fresh proxies from my proxy provider, but when I do get 5 working proxies again will adding a delay of 45 sec and 1 min or maybe even higher, I'm fine with it taking a few days as long as it gets the job done without getting blocked, make a difference or is it more likely that Google will instantly block them again after just a few harvest and I should just give up on the idea of using "site:url.com + $40..$80 + Keyword"? Also would it maybe make a difference if I removed "site:url.com" and just had "$40..$80 + Keyword"?

Also I can't seem to get it to work, but is there any way to do a number search range like "$40..$80 + Keyword" for search engines other then Google, so for AOL, Bing and Yahoo? Really for what I am trying to do it's not that dependent on it needing to be Google and it sounds like the other search engines are less ban happy, but I can't find anyway to do "$40..$80" in other than Google.

Thanks

Well google is going to block that query quicker then a standard keyword only search, so I would make sure you to go settings and untick the use custom harvester as well as the use multi threaded harvester. Then do the delay, but I would do no less then 45 as you noted. You can manually modify the configuration file, located in the configuration folder - which is inside your scrapebox folder.

Look for


RndDelayMin=1
RndDelayMax=2

That is in seconds, so you could set it to like

RndDelayMin=120
RndDelayMax=240

That would delay between 2 mins and 4 mins. So you can definitely use your query, its just a matter of how fast you can go. If you wanted to use a long enough delay, then you don't even have to use proxies. Although using 5 proxies will make it work 5 times faster and you can go lower on the delay. Try the 45 sec to 1 min and then if that does't work, just up the delay till you find your sweet spot.

As for bans, google unbans all ips typically in 24 hours or less, although if its a repeat offense I have seen it take close to 48 hours.


I wouldn't say the other engines are less ban happy necessarily, I mean some are, but I personally just never even bother with any engine except google, and I have a couple automator files that use yahoo I guess. But yahoo gets banned quicker then google with my settings.

I am a go big or go home person. so I would rather master google and know the ins and outs and not bother with any other engine, as opposed to try to chase down the least ban happy engine. Just how I am.

I had a quick look at yahoo, and I didn't see a way to do the query you want.

Here is bings operator list, although I don't see a option to make it work there either:
http://msdn.microsoft.com/en-us/library/ff795620.aspx

Anybody use RankTracker Plugin? I would like to know whether it is any difference between SerpBook or Serp Explorer.

I use the Rank Tracker Plugin, but I do not use SerpBook or Serp Explorer. So I can't give you a comparison however I can say that the rank tracker gets the job done. It tracks rank for the 3 major engines, including their variations from around the world. It provides handy charts and it can run with a scheduler, so it runs when I sleep. I set delay to 45 and o not use proxies, even with google and it works flawlessly.

I tried out the new browser ping mode and can't get it to show up in the analytics of my site. Actually, not even the reg. ping mode did it ever show the hits. Am I doing it wrong?

I add a list of sites I want to ping
I add a list of referrers
I tick the ping mode box
I specify the numbers of pings per url
And lastly, for the new browser plugin ping option, I tick the option via "settings" at the top

And nothing. Do I need to add a list of IP addresses somewhere, either with working proxies, or just a list of IP addresses I want showing? Or anything else? Hopefully someone can chime in on this with a solution.

Thanks.

You need working proxies. If you want 100 hits per url, you need 100 working proxies. Analytics software, as a general rule, will only record 1 unique visit per IP per day.

Im working on a video for this, if I can get it wrapped up, Ill launch it tomorrow.

Guys, when you're harvesting using a large keyword list and you stop scrapebox, is there a way to continue scraping from the last harvested keyword?

If you use the multi threaded harvester, you can export uncompleted keywords. Go to settings and untick "use custom harvester".

 

[adamex1970]

When we try to psot scrapebox automatically removes urls that ends with pdf, jpg etc - that we could never post on. Is it possible to filter them on demand? I have a list and want to remove all urls that are files - ending with such extension.

 

[tahworld]

Email is best, although you can pm me here too. Im in the middle of selling my house at the moment and we have an offer and inspection is monday and my life is a bit upside down. Wife is sick, 10 month old is still sick and all that jazz as well. So Im just behind on my personal email, when I have to choose between it and sleep, I try and do it but when I wake up on my desk more then once I call it quits, lol.

Ah sorry to hear that man, I guess it can wait no problem. Hope things change for you soon, you deserve it.

 

[tahworld]

When we try to psot scrapebox automatically removes urls that ends with pdf, jpg etc - that we could never post on. Is it possible to filter them on demand? I have a list and want to remove all urls that are files - ending with such extension.

Hey you can click Remove / Filter and then Remove URLs containing... and then type in .PDF
Then do the same for .jpg .jpeg .png etc.
I don't know of a on demand faster way.

Besides the automatic function that triggers by itself of course.

 

[adamex1970]

I know but what in case we have a domains like: www.pdfthebestresources.com

 

[loopline]

When we try to psot scrapebox automatically removes urls that ends with pdf, jpg etc - that we could never post on. Is it possible to filter them on demand? I have a list and want to remove all urls that are files - ending with such extension.

You can do as tah noted, but you can also just put them all in a text file and then save it. One per line. Then go to filter/remove and choose remove urls containing entries from - and then select the text file. That way you don't have to do each one manually.

I know but what in case we have a domains like: www.pdfthebestresources.com

just put like

a.pdf
b.pdf
c.pdf
etc...

and go thru the whole alphabet. Because its likely to end in a file name like

http://www.domain.com/file.pdf

and

e.pdf

would remove that.

Just leave off

w.pdf

and it won't remove the domain name ones. Just if you had a file that ended in filew.pdf it would keep it, but if your looking for better safe then sorry its better to have a few extra urls that end in w.pdf then remove all the ones that start with www.pdfdomain.com

 

[Hinkys]

So I just got SB running after a couple of months of not being able to because for some reason it couldn't get activated on the VPS I used at the time.

Anyway, just tried checking some proxies and there's something weird with the proxy manager. Even tho it's set to use 100 connections, it's barely using 30 right now.

The last time I used it couple of months ago, number of connections got to 100 (or whatever they were set to) immediately and stayed there. However, now it seems like it's firing 1 thread at a time and slowly climbing up. The problem starts when the old threads start finishing and it seems like SB can't keep up with it.
Result of this is that the number of connections averages around 25. (at that point the speed of new threads being started = speed of old threads finishing their proxy check)

Anyone else experiencing this? Also it's a 3gb / 4 core PowerUpHosting SSD VPS so I would imagine it's not due to some server issue.

 

[loopline]

So I just got SB running after a couple of months of not being able to because for some reason it couldn't get activated on the VPS I used at the time.

Anyway, just tried checking some proxies and there's something weird with the proxy manager. Even tho it's set to use 100 connections, it's barely using 30 right now.

The last time I used it couple of months ago, number of connections got to 100 (or whatever they were set to) immediately and stayed there. However, now it seems like it's firing 1 thread at a time and slowly climbing up. The problem starts when the old threads start finishing and it seems like SB can't keep up with it.
Result of this is that the number of connections averages around 25. (at that point the speed of new threads being started = speed of old threads finishing their proxy check)

Anyone else experiencing this? Also it's a 3gb / 4 core PowerUpHosting SSD VPS so I would imagine it's not due to some server issue.

Ive never heard of this. Its working perfectly for me. Are you using the V 1.16.62? If not try updating.

You can download scrapebox from here:
http://www.scrapebox.com/payment-received

 

[loopline]

Browser Based Ping Mode:
[video=youtube_share;mbJZ1cEInSM]http://youtu.be/mbJZ1cEInSM[/video]
​

 

[tahworld]

Hey loop, do you know why link extractor keeps crashing when there's too many URLs? Is there a temp file where I can still save my links?

Great video by the way, thanks!!

 

[briptech]

Hi loopline, great video. I have tried to "inflate" a test site of mine, by using 40 private proxies. Let's see how it goes

 

[aoe316]

I have a quick pre purchase question. I am looking to buy scrapbox right now. I have found a few different offers and discounts on the web, is there a difference (besides in price) if I buy it here or from kingwarrior, or warrior form or anywhere else on the web? I see its 5 dollars cheaper from kingwarrior is it safe to go that route?

 

[briptech]

Hi loopline, I'd have another question. I read a note that the Ping Feature can be used to inflate pages, and videos too. How can I handle a YT video or a SoundCloud audio, considered that those pages do require the user to "stay on page" for a few minutes?

 

[adamex1970]

Try the random option delay of the pinger.