Permanently Closed Marketplace Sales Thread

[loopline]

Firstly, apologies for my absence it's the first time in 6 years I've left ScrapeBox like this. However I was rushed to hospital with internal bleeding semi-conscious so I didn't have much of a choice. All up i spent 5 days without food or water, so while i'm back it's going to take a bit to get strength back to spend any length of time at the computer and get back to normal.

Anyhow a huge thank you to Loopline for stepping in and helping out with the support, and to everyone who held off sending emails to lower the workload during the past week a huge thankyou. I even got the following email from one customer which was fantastic to read:



Also we had scheduled the price rise to happen days ago, and this obviously didn't happen. So we have extended this another 48 hours from this post.

Thanks everyone.

Thats no good, if I had been 5 days without food and water I wouldn't have even been able to do what you did. Glad to see that you are back home and no rush, we all realize that your health is of course most important.

Also happy to help, get well!

i just bought the premium article plugin. when i try to post articles on blogger, it shows an error 400. how to post to blogger without any error

Google changed some things and they require a bunch of things now which will basically leave a huge footprint of which blogs you are posting to. So I know Sweetfunny and Softtouch were going to look into it to see if they could get a way around it, but I have no idea what the time frame would be at this point as to when they can do that. Also not sure if its even something thats doable, google is always changing the game.

I recently purchased Scrapebox and wanted to use the Google Competition Finder addon with some private proxies that I own, but unfortunately I am always getting some error messages like "Error -1" and "Error 503"

Here is a screenshot:
View attachment 68816

When testing the proxies manually everything is just fine.

Hope you can help.

Thanks!

503 is a ip block. So you can try different proxies. Error -1 could be a few things. But make sure you set the addon and Scraepebox as trusted in all security software and you can try closing down unneeded programs to see if something is simply interferring.

Try a test of a few without proxies, does it work? You may just need new proxies or those will probably be unblocked in a day or two, and then just go slow enough to make sure they don't get blocked.

It could technically be your router as well so you can try whitelisting Scrapebox in your router.

 

[softtouch2009]

I recently purchased Scrapebox and wanted to use the Google Competition Finder addon with some private proxies that I own, but unfortunately I am always getting some error messages like "Error -1" and "Error 503"

Here is a screenshot:
View attachment 68816

When testing the proxies manually everything is just fine.

Hope you can help.

Thanks!

The Error -1 indicate a socket error, so it looks like your proxies are bad.

 

[blackbbm129]

hello, i using scrapebox to scrape phone number using regex.. my question is how to increase the phone number scrape thread? because it's set to default 30 thread and it take a long time to scrape phone number with only 30 thread.. thx

 

[Completed Thoughts]

Have you checked, out decaptcher!

 

[algski]

Welcome back :super: Sweetfunny , Glad you're doing well , may God protect you , your family and all the community

 

[TheSEOWizard]

Firstly, apologies for my absence it's the first time in 6 years I've left ScrapeBox like this. However I was rushed to hospital with internal bleeding semi-conscious so I didn't have much of a choice. All up i spent 5 days without food or water, so while i'm back it's going to take a bit to get strength back to spend any length of time at the computer and get back to normal.

Anyhow a huge thank you to Loopline for stepping in and helping out with the support, and to everyone who held off sending emails to lower the workload during the past week a huge thankyou. I even got the following email from one customer which was fantastic to read:



Also we had scheduled the price rise to happen days ago, and this obviously didn't happen. So we have extended this another 48 hours from this post.

Thanks everyone.

Hey my friend, I just logged in to BHW after several days today. Sad to hear about your medical emergency. How are you feeling now? Hope you get back to the best of health once again.

Please take care of your health properly. Life is always more important than anything else. God bless.

I just wanted to inform that the Google+ and Pinterest stats are working again in the Social Checker starting today. The error issue in the Page Authority addon is also more or less fixed. In today's list, I had less than 0.005% error in total while using private proxies. So, that issue is also fixed. Thanks a ton again Sweetfunny for fixing nearly every request I made. God bless you. Thanks.

And thank you loopline for the great support and help as always.

I would like to provide an update about the Social Checker. I have been checking and noticed it lately that the Google+ and Pinterest issue is not solved. Actually, this problem occurs only when I am checking domains and it leaves those two rows blank. But if I am checking subdomains such as tumblr blogs, it works fine and all the 5 social rows including those two show up. I tested it many times and it seems to be the same case each and every time. So, in short, all 5 social rows stats shows up in Social Checker addon when I use subdomain blogs or websites such as tumblr etc. but when I try to check different domains, those two automatically remain blank. I am not sure if this feature is intentional due to some issue or precaution. But in case it is not intentional, hope this observation would help in fixing the issue.

 

[loopline]

hello, i using scrapebox to scrape phone number using regex.. my question is how to increase the phone number scrape thread? because it's set to default 30 thread and it take a long time to scrape phone number with only 30 thread.. thx

No there is no way that I can see to change it for the actual phone number grabber, however you could just take your regex and use the custom data grabber under grab/check >> custom data grabber. It is just like the phone number grabber, same setup actually and just build it in there and then you can control the connections. I have a video on it, if you need it, or well I uploaded it to youtube tonight but YT is being problematic, I need to go fix it, its not showing.

Anyway, it would work.

Hey my friend, I just logged in to BHW after several days today. Sad to hear about your medical emergency. How are you feeling now? Hope you get back to the best of health once again.

Please take care of your health properly. Life is always more important than anything else. God bless.







I would like to provide an update about the Social Checker. I have been checking and noticed it lately that the Google+ and Pinterest issue is not solved. Actually, this problem occurs only when I am checking domains and it leaves those two rows blank. But if I am checking subdomains such as tumblr blogs, it works fine and all the 5 social rows including those two show up. I tested it many times and it seems to be the same case each and every time. So, in short, all 5 social rows stats shows up in Social Checker addon when I use subdomain blogs or websites such as tumblr etc. but when I try to check different domains, those two automatically remain blank. I am not sure if this feature is intentional due to some issue or precaution. But in case it is not intentional, hope this observation would help in fixing the issue.

This has to be something on your end, Ive not had these issues and I just tried it with like Scrapebox.com and it worked fine.

I mean if you want to post a dozen urls that don't work for you, I can try them, but I Can't get it to fail.

 

[softtouch2009]

No there is no way that I can see to change it for the actual phone number grabber, however you could just take your regex and use the custom data grabber under grab/check >> custom data grabber. It is just like the phone number grabber, same setup actually and just build it in there and then you can control the connections. I have a video on it, if you need it, or well I uploaded it to youtube tonight but YT is being problematic, I need to go fix it, its not showing.

Anyway, it would work.



This has to be something on your end, Ive not had these issues and I just tried it with like Scrapebox.com and it worked fine.

I mean if you want to post a dozen urls that don't work for you, I can try them, but I Can't get it to fail.

I think he used domains without http, which google+ and pinterest do not like. But thats fixed in the today released update of the addon.

 

[Sweetfunny]

Hey my friend, I just logged in to BHW after several days today. Sad to hear about your medical emergency. How are you feeling now? Hope you get back to the best of health once again.

Please take care of your health properly. Life is always more important than anything else. God bless.

Thanks very much, the past week or so has been a bit rough but i'm improving slowly each day. It's not something i ever want to go through again and you're right, health is important we need to look after it especially when many of us work long hours online.

I would like to provide an update about the Social Checker. I have been checking and noticed it lately that the Google+ and Pinterest issue is not solved. Actually, this problem occurs only when I am checking domains and it leaves those two rows blank. But if I am checking subdomains such as tumblr blogs, it works fine and all the 5 social rows including those two show up. I tested it many times and it seems to be the same case each and every time. So, in short, all 5 social rows stats shows up in Social Checker addon when I use subdomain blogs or websites such as tumblr etc. but when I try to check different domains, those two automatically remain blank. I am not sure if this feature is intentional due to some issue or precaution. But in case it is not intentional, hope this observation would help in fixing the issue.

Loopline i was stumped on this too, but the subdomain thing gave a hint. Google +1 and Pinterest counts are not given for any URL's without http:// so if you just enter the www version of the domain it will fail. The addon has been updated and it now appends http:// to any domains missing this.

Edit: Softtouch beat me to it.

 

[Marc_L]

I appreciate the quick license transfer today guys. It was like 5 minutes. Thanks.

 

[blackhatter007]

I have scrape box license i bought about on 2010 or 11 it works fine for 2-3 years but on 2014 by using some cracked software by pc get infected and hacked and some stole me scrape-box license . i try to contact support multi-pal times with my payment proof transaction id but no response so i gave up that time but now i show this thread here and i hope that scrapebox team will help me to get back my license that is stolen i can again p[provide my license details please OP Help me

 

[loopline]

Thanks very much, the past week or so has been a bit rough but i'm improving slowly each day. It's not something i ever want to go through again and you're right, health is important we need to look after it especially when many of us work long hours online.



Loopline i was stumped on this too, but the subdomain thing gave a hint. Google +1 and Pinterest counts are not given for any URL's without http:// so if you just enter the www version of the domain it will fail. The addon has been updated and it now appends http:// to any domains missing this.

Edit: Softtouch beat me to it.

Ahh, ok that makes sense. I always use http:// on my domains so I just didn't think of it. Glad its sorted.



Also just released a video on the custom data grabber.

Custom Data Grabber

 

[zoewarrior]

Hi Loopline

I am using VPS for SB. It comes with 3 cores and 4GB RAM. Today, I use 35K+ keywords without advance operators. I notice all CPU resources are maxed out. RAM usage hovers around 1GB.

Based on your experience, how many keywords can SB scrape without maxing the CPU resources? I don't mind to split the keywords into several lists. I just want to know how big the list should be based on my VPS spec.

 

[loopline]

Hi Loopline

I am using VPS for SB. It comes with 3 cores and 4GB RAM. Today, I use 35K+ keywords without advance operators. I notice all CPU resources are maxed out. RAM usage hovers around 1GB.

Based on your experience, how many keywords can SB scrape without maxing the CPU resources? I don't mind to split the keywords into several lists. I just want to know how big the list should be based on my VPS spec.

Volume of keywords will have an impact on memory (RAM) usage, but not really on processor, the number of connections being used and the specific engines being used have an impact on processor.

So you can turn connections down, and certain engines are not as optimized. For example google is very good about optimzing their pages, so you use less processor, where as bing is not so good, or perhaps its their selling point with the fluffy colorful pages, but its bad for having to power thru all those pages and extract data.

So load in 3.5 million keywords if you want, just turn the connections down or try different engines, or a combo of both. I work with huge keyword lists with no issues.

 

[loopline]

I have scrape box license i bought about on 2010 or 11 it works fine for 2-3 years but on 2014 by using some cracked software by pc get infected and hacked and some stole me scrape-box license . i try to contact support multi-pal times with my payment proof transaction id but no response so i gave up that time but now i show this thread here and i hope that scrapebox team will help me to get back my license that is stolen i can again p[provide my license details please OP Help me

Just contact support directly about this

support (at] Scrapebox {dot) com

They always respond in 24 hours, but you can check your spam folder if your not getting a response. Also you can whitelist

@scrapebox.com

 

[abyssal_miss]

is there a plugin for determining CF / TF for mass links?

 

[loopline]

is there a plugin for determining CF / TF for mass links?

The page authority addon will scan for MOZ page authority/domain authority in mass, but will not do CF/TF. So no, but PA/DA is a good metric as well.

 

[roibert]

Hi loopline
would i be able to get data from Yellowpages with Custom Data Grabber or any other directory site?

Ahh, ok that makes sense. I always use http:// on my domains so I just didn't think of it. Glad its sorted.



Also just released a video on the custom data grabber.

Custom Data Grabber

 

[TheSEOWizard]

I think he used domains without http, which google+ and pinterest do not like. But thats fixed in the today released update of the addon.

Loopline i was stumped on this too, but the subdomain thing gave a hint. Google +1 and Pinterest counts are not given for any URL's without http:// so if you just enter the www version of the domain it will fail. The addon has been updated and it now appends http:// to any domains missing this.

Edit: Softtouch beat me to it.

Thank you for the help. I understand it now. I normally check the raw domain lists or www as I go through different metrics. I tried it after the update and those two are not working. I will add the http:// part myself now as I understand the logic.

But could you please inform me one small feature if it is available in scrapebox and if not, could you please add in a future update. It would be great if you could add a button to prefix http:// in a whole list and another button to prefix www. in a whole list in the harvester. The reason I am saying about 2 buttons is because both of them have different use. In case of expired domains for example, the www and non-www has different metrics for Moz etc. So, at times both need to be checked. These three would work for checking root, subdomain and page metrics as those are different in many cases. Just a thought. If not, I would do that manually.

 

[softtouch2009]

Thank you for the help. I understand it now. I normally check the raw domain lists or www as I go through different metrics. I tried it after the update and those two are not working. I will add the http:// part myself now as I understand the logic.

But could you please inform me one small feature if it is available in scrapebox and if not, could you please add in a future update. It would be great if you could add a button to prefix http:// in a whole list and another button to prefix www. in a whole list in the harvester. The reason I am saying about 2 buttons is because both of them have different use. In case of expired domains for example, the www and non-www has different metrics for Moz etc. So, at times both need to be checked. These three would work for checking root, subdomain and page metrics as those are different in many cases. Just a thought. If not, I would do that manually.

Adding http:// as prefix is already available via the "More List Tools" button.