Permanently Closed Marketplace Sales Thread
- Thread starter Sweetfunny
- Start date
- Status
anon1577
Junior Member
- Nov 6, 2011
- 124
- 81
I need some help with the fast poster.
I have a list of 120k AA blogs. When I post I only get ~45% success rate. After checking the links I take the the list of failed and errors and post to them a second time I get another ~40-45% successrate of that particular list. It just seems that the ~40-45% success rate is there no matter what I do. And the sites are fine, since scrapebox manages to post on them after x retries.
I've followed the scrapebox optimize guide but it didn't help much.
I noticed there are three types of errors on every blast:
"403"
"500"
and just "Error".
I have 20 proxies and a 100/100 Mbit connection.
I've tried to set the maximum connections to 10, 50, 100, 150 and 200.
I've tried splitting the list into 20k lists.
The timeout is set to 90sec.
It's on randomize.
I always check my proxies after each blast and they're fine.
I have a list of 120k AA blogs. When I post I only get ~45% success rate. After checking the links I take the the list of failed and errors and post to them a second time I get another ~40-45% successrate of that particular list. It just seems that the ~40-45% success rate is there no matter what I do. And the sites are fine, since scrapebox manages to post on them after x retries.
I've followed the scrapebox optimize guide but it didn't help much.
I noticed there are three types of errors on every blast:
"403"
"500"
and just "Error".
I have 20 proxies and a 100/100 Mbit connection.
I've tried to set the maximum connections to 10, 50, 100, 150 and 200.
I've tried splitting the list into 20k lists.
The timeout is set to 90sec.
It's on randomize.
I always check my proxies after each blast and they're fine.
Last edited:
- Jan 25, 2009
- 6,378
- 3,774
Go to options >> Email Grabber: Save urls with email - and make sure it is checked.
Just put your keywords/footprints in the keywords box and then choose your engine, make sure you have working proxies loaded and hit start harvesting.
403 is fobidden, this could be from your proxies, if you have too many concurrent connections, and they deny some, 500 "could" probably be the same potentially.
All 3 errors could be the result of security software blocking some of the connections. Typically just "error" means the connection never left the machine. So that is usually security software, such as anti-virus, firewall, malware checker, etc... So make sure you have Scrapebox set as trusted/allowed in all security software.
It could also be pretty much any 3rd party program, so you can try closing down unneeded programs, things like skype, uttorrent etc... could be messing with the threads.
prophecyprojekt
Regular Member
- Jul 30, 2012
- 326
- 91
I have a quick question about RSS Feed submit ... I submitted just 1 rss feed url. I hit play and it literally took half a second! Is that how fast it is? Or did I configure it wrong? Thanks!
Daffy10
Regular Member
- Mar 12, 2014
- 323
- 45
Hi,
I have some problem with proxies.. I have scrape all google proxy from your Harvest Proxies, about 200, then I have inserting 5 keywords and start harvesting.
Here, if I use proxy I'll have 600 harvested and if use no proxy have 5000 result... Why that? How can I do for have the same result with also use proxy? Then, other problem is that with proxy it not scrape all keywords list..
I have some problem with proxies.. I have scrape all google proxy from your Harvest Proxies, about 200, then I have inserting 5 keywords and start harvesting.
Here, if I use proxy I'll have 600 harvested and if use no proxy have 5000 result... Why that? How can I do for have the same result with also use proxy? Then, other problem is that with proxy it not scrape all keywords list..
- Jan 25, 2009
- 6,378
- 3,774
Your welcome.
That depends, how many RSS services are you submitting to? If you had only 1 service and 1 url to submit then sure, it might only take half a second. Else its probably just getting an error and aborting. Are you using proxies?
The problem is the proxies. Even though they are google passed, so many people can be using them that they can literally be blocked from the time you test them to the time you start harvesting. If you go to settings and uncheck both "use multi threaded harvester" and "use custom harvester" and then harvest, you will get status codes, most of which are likely to say 302 ip blocked.
Also there are different kinds of bans, so you can literally have a ip that is passed for basic keyword search or 1 type of query and blocked for another. The proxy tester only tests for basic search, but if your not doing that then you may be starting with a bunch of blocked proxies. You can build a custom test in the proxy tester for the query your working with.
Here is 2 videos that would be helpful
https://www.youtube.com/watch?v=P9CbGhfc1aY
https://www.youtube.com/watch?v=2QaLWgTXsRo
prophecyprojekt
Regular Member
- Jul 30, 2012
- 326
- 91
I have a quick question about RSS Feed submit ... I submitted just 1 rss feed url. I hit play and it literally took half a second! Is that how fast it is? Or did I configure it wrong? Thanks!
That depends, how many RSS services are you submitting to? If you had only 1 service and 1 url to submit then sure, it might only take half a second. Else its probably just getting an error and aborting. Are you using proxies?
Yes I am using proxies! 1 URL but I selected all services!
- Jan 25, 2009
- 6,378
- 3,774
Http proxies are fine for almost everything, although SOCKS will work. Also they should be anonymous, yes.
Originally Posted by prophecyprojekt
I have a quick question about RSS Feed submit ... I submitted just 1 rss feed url. I hit play and it literally took half a second! Is that how fast it is? Or did I configure it wrong? Thanks!
That depends, how many RSS services are you submitting to? If you had only 1 service and 1 url to submit then sure, it might only take half a second. Else its probably just getting an error and aborting. Are you using proxies?
Yes I am using proxies! 1 URL but I selected all services!
Does it show all services completed? Its likely that the issue is the proxies, try it without proxies.
Why is my SB all of a sudden harvesting URL's different to I've seen it done before - the screen now splits into an upper and lower half with "Active Engine", "On Page, "Keyword Used", "Result" etc - is it even harvesting URL's? Have not used SB in about a week nor changed any settings. Any thoughts appreciated, thank you.
prophecyprojekt
Regular Member
- Jul 30, 2012
- 326
- 91
I have been hoping that SB 2.0 was coming out today since it was 5 years ago today that this thread started! It's not too late! 
- Jan 25, 2009
- 6,378
- 3,774
ѕє∂σηιc;7297182 said:
You will have to use the single threaded harvester to get an accurate idea of if your proxies are banned. Go to settings and uncheck use multi threaded harvester and use custom harvester. However if you aren't getting results but you get results for the same query in a browser, then its most likely your proxies are blocked.
You could probably use 2-4 connections. I have a run with this exact setup right now using 2 connections with no delay and its going fine.
Well what did it have before? There are 3 harvesters in Scrapebox 1.x. So you may have chanced 1 thing under settings which tell it to use a different harvester. It sounds as if you are using the single threaded harvester. Try going to settings >> use multi threaded harvester - and make sure this is checked. Does that make it look like it was?
400 does not come from google, so thats either a proxy or security software issue. Try it without proxies, does it give the same error? If not then its probably the proxies, if so then its probably security software on your pc such as anti-virus, malware checkers, firewalls etc... So make sure you set Scrapebox as trusted/allowed in all such software.
I have been hoping that SB 2.0 was coming out today since it was 5 years ago today that this thread started! It's not too late!
Sorry, I found a windows issue where windows released a bad update for windows 2008 R2 using AMD emulation, and basically they can't change windows so they had to come up with a work around to bypass microsofts screwup. So I have been presenting them problems, plus they are still working on it, no doubt it will be soon enough though.
that would have been cool!I have been hoping that SB 2.0 was coming out today since it was 5 years ago today that this thread started! It's not too late!
Daffy10
Regular Member
- Mar 12, 2014
- 323
- 45
hI, I have many problem to scrape all url of google serp.
If I need for example, to scrape the first 100 urls results of google serp with determined keyword scrapebox show me much url that not in the google serp or for example, show me 20 result of yellow page that aren't on the google serp..
How can I do for scrape just the same result of google ?
thanks
If I need for example, to scrape the first 100 urls results of google serp with determined keyword scrapebox show me much url that not in the google serp or for example, show me 20 result of yellow page that aren't on the google serp..
How can I do for scrape just the same result of google ?
thanks
mikeybobikey
Junior Member
- Dec 26, 2009
- 169
- 265
Can SB scrape 'past week, 'past month' etc results?
Also, my learning mode poster disappeared and when I try to re-install it, it shows that it downloads and installs succesfully but never appears in the drop down. Then, when i try to launch it manually from the Addons folder, it tells me 'some or all required data is missing'
Also, my learning mode poster disappeared and when I try to re-install it, it shows that it downloads and installs succesfully but never appears in the drop down. Then, when i try to launch it manually from the Addons folder, it tells me 'some or all required data is missing'
- Status