Permanently Closed Marketplace Sales Thread

[loopline]

There is a problem with the Scrapebox Link Extractor addon, if the site doesn't use full path links like "/page" the link doesn't get extracted.

Can this fixed? the Link Extractor is much faster than scraping google

The link extractor does not extract relative links, like your talking about. It only extracts absolute links. They tried the relative links in the past, but the issue is that it creates more false positives and over all issues then it fixes. You can wind up extracting all sorts of "links" that aren't what your after. Anyway, they tried it and it caused way more complaints and support issues then it is now so they switched it back.

Hello, I am curious whether it is recommended for arabic language use? because I have read somewhere else in the forum that its not....
what is the main difference between the box and the jet and the automator?
for a total beginner whos still afraid from distroying his not yet existing raking what do u recommend?
are they recommended for 1 tier or 2 tier?
might be asking too much but i would really appreciate ur answer since I am completely lost
if youve got some clarifying videos by any chance would be nice
cheers

In Scrapebox you can scrape Arabic keywords using the unicode addon and you can post Arabic comments using the learning mode poster. The rest of the functions in scrapebox do not support unicode. Although the vast majority of the rest of the functions you would be using urls, not words so it wouldn't matter.

Scrapejet does support unicode.

The Automator is a plugin for scrapebox that allows you to "que up" a list of things for scrapebox to do. It does not affect how scrapebox works with Arabic.

It sounds like you are thinking of scrapebox as a link building tool. Scrapejet is designed to build links. Scrapebox does build links, but that is only a VERY small percentage of what it can do.

You can build the links directly at the money site or teirs, it depends on what your SEO strategy is. If I were you I would plan my SEO strategy first and then find the tool that best fits it, not try and find a tool and then make my seo strategy fit inside that tool.

I have lots of videos and resources for both Scrapebox and Scrapejet. The central place where I have everything linked from is here:

http://www.scrapestuff.com/

 

[ahmadempire]

thanks a lot for your helpful answer

 

[loopline]

thanks a lot for your helpful answer

Your welcome mate, glad to be of a help.

 

[Mex-deluxe]

I made DuckDuckGo work. Only first page results, because the next page is a submit button, not a link.

Query string: https://duckduckgo.com/html/?q={KEYWORD}
SSLv3

Must be in link: rel="nofollow" class="large" href="

Just before the URL: href="
Right after the URL: "

Character translation: %3f=?|%3d==|%26=&|%3a=:|&=&|%2F=/

By the way this whole "must be/must not be in link", "just before the URL/right after the URL" is a mystery to me. I don't understand it. What is a "link"? Is it the whole <a href=""> part?
Just before the URL: inside the a element?

Why not eliminate those 4 fields and allow us to use a regular expression to extract links?

 

[Mex-deluxe]

Problem: I never get past the "Getting proxies..." stage when using the custom harvester. In the main windows, under the "Select Engines & Proxies" I don't have the "Use proxies" box checked.

I checked the Settings - Use custom harvester.
Then in the custom harvester settings:
use selected sources
10 proxes to retrieve before start harvesting
keep proxies faster than 10000 ms
200 threads

Then I entered my custom proxy source URL in the Proxy harvester section and I thicked it.

How when I hit the Start harvesting button in the main window, I keep getting the "Getting Proxies..." message in the custom harvester windows but nothing happens.

I would like Scrapebox to take my custom proxy source URL, get the proxies, and check them for anonymity every 30 minutes, and keep harvesting using multiple search engines. But it doesn't work. I must load the proxies manually.

 

[alosi]

Another noob question...

When I scrape proxies I find the results as Anonymous 600 and Google Passed as 150 and no matter what option I select i.e. Keep anonymous proxies, Keep Google proxies, Keep anonymous google proxies... I only end up with a number near the Google Passed figure of 150. How do I save the entire list of 600 anonymous proxies to use with other tools. While they may not work for scraping Google they should work fine for posting with other tools on different sites... unless I'm missing something here.

 

[The Supplier]

gr8 tool once i manage to figure it out XD

 

[loopline]

I made DuckDuckGo work. Only first page results, because the next page is a submit button, not a link.

Query string: https://duckduckgo.com/html/?q={KEYWORD}
SSLv3

Must be in link: rel="nofollow" class="large" href="

Just before the URL: href="
Right after the URL: "

Character translation: %3f=?|%3d==|%26=&|%3a=:|&=&|%2F=/

By the way this whole "must be/must not be in link", "just before the URL/right after the URL" is a mystery to me. I don't understand it. What is a "link"? Is it the whole <a href=""> part?
Just before the URL: inside the a element?

Why not eliminate those 4 fields and allow us to use a regular expression to extract links?

Id say the biggest reason is that the large portion of the sbox user base would have no idea what Regex is. I mean I have people ask me how to check page rank in scrapebox.... Pretty easy, just open your eyes.


Its probably because of the engines your looking at. Look at links in Googles results. The url appears twice as well as a ton of other stuff, you wouldn't want all that. ITs not needed for things like duckduckgo cause they just give the link. The concept is to be as diverse as possible.

But yeah, I even asked Sweetfunny, and duckduckgo is problematic for getting to the next page. I messed with it for a long time and could only get page 1 as well. Biadu is much worse, they run things thru internal redirects.

Anyway, its not going to work with absolutely every engine out there, but enough that we can quickly amass a pile of urls. lol

Problem: I never get past the "Getting proxies..." stage when using the custom harvester. In the main windows, under the "Select Engines & Proxies" I don't have the "Use proxies" box checked.

I checked the Settings - Use custom harvester.
Then in the custom harvester settings:
use selected sources
10 proxes to retrieve before start harvesting
keep proxies faster than 10000 ms
200 threads

Then I entered my custom proxy source URL in the Proxy harvester section and I thicked it.

How when I hit the Start harvesting button in the main window, I keep getting the "Getting Proxies..." message in the custom harvester windows but nothing happens.

I would like Scrapebox to take my custom proxy source URL, get the proxies, and check them for anonymity every 30 minutes, and keep harvesting using multiple search engines. But it doesn't work. I must load the proxies manually.

It works for me, when I do what your saying. Have you tried to manually get the proxies and test them in the regular proxy tester? I mean its possible that the source you entered isn't working, missing a character in the url, not compatible, takes a long time... Im shooting in the dark, but you get the point.

If it works when you try it manually, and it pulls proxies, and tests them it should work in the custom harvester, cause its doing the same thing. Double check the simple stuff is what I mean. Thats what always gets me, lol

For me though, it grabs the proxies, tests them, scrapes and then at the interval I set it goes and gets more etc...

Another noob question...

When I scrape proxies I find the results as Anonymous 600 and Google Passed as 150 and no matter what option I select i.e. Keep anonymous proxies, Keep Google proxies, Keep anonymous google proxies... I only end up with a number near the Google Passed figure of 150. How do I save the entire list of 600 anonymous proxies to use with other tools. While they may not work for scraping Google they should work fine for posting with other tools on different sites... unless I'm missing something here.

Just click configuration and tick off the No Google test. If you have google test ticked off, the tester will qualify any proxies that does not pass google as not good. Essentially. So if you want non google proxies then don't test against google.

 

[twistedtrick]

Just put a license transfer through a few hours ago, can't wait to get this back up and running again!

 

[proxygo]

Just put a license transfer through a few hours ago, can't wait to get this back up and running again!

you wont be disappointed

 

[blackmoss]

Can anyone enlighten me on the differences between Gscraper and Scrapebox?

Thanks.

 

[loopline]

Can anyone enlighten me on the differences between Gscraper and Scrapebox?

Thanks.

Ive read over Gscraper but I will say I did not extensively research it and use it. However based on the information that is on their website the difference between Gscraper and scrapebox (short version) is this:

Scrapebox does everything Gscraper does, and about 1000 more things. Gscraper is $38 vs scrapebox at $57.

Gscraper seems limited to Google engine, where as scrapebox can do 20+ (technically it can do as many as you want to add, cause you can add your own, but I just picked a number thats reasonable)

Scrapebox seems to give you more granular control and is more powerful on filters and usage. Gscraper seems limited to preinput filters where as you can build anything into scrapebox.

Basically Gscraper seems focused around building blog comments/links based on urls scraped from google while scrapebox can scrape from basically any engine, and does build blog comments and trackbacks and RSS feed submission links and Rapid Indexer/WHOIS style links as well as has the learning mode poster to post to any other platform you want to build in.

So Gscraper is for scraping google and building links. Scrapebox is the Swiss Army knife of SEO doing what Gscraper does and then adding $800 worth of other tools to your arsenal as well. Plus scrapebox has premium plugins that further expand it, such as rank tracking and automating the entire scrapebox tool. Etc...

Thats my 2 cents based on what I see on their site and based on what I know about scrapebox.

 

[loopline]

I have been using it since 2013 January but i,t is not usefull anymore, because scraper doesnt work fine also Backlink tool.

So is this just an attempt to inflate post count or what? You have been using it for 1 month but now 9 days into February its no good anymore?

Why, well of course the scraper works fine and in fact about 8 new engines have been added in the past few weeks with the launch of the custom harvester. So the scraper actually works with more engines then ever.

also Backlink tool - what does this even mean? Sure it builds backlinks among a thousand other features.

If you care to make an accurate claim that has some reasonable info to it as to how we can help you, then go for it. But you should know that posting in the BST section doesn't increase your post count.

 

[loopline]

Am I the only one who gets the error "Unable to check for addons at the moment"?

Yes.

Hehe

Probably not actually Im sure there are others out there. The issue is that your version of scrapebox is too old. They have changed servers due to various upgrades etc... and you need to update to the latest version of scrapebox.

You can download scrapebox from here:
http://www.scrapebox.com/payment-received


Thats the most likely reason. If you are up to date to V.67 or greater then you would want to check your firewalls/anti-virus type programs to make sure you add allow rules. Because they could be blocking scrapebox from contacting the addon servers.

 

[turoc]

Why, well of course the scraper works fine and in fact about 8 new engines have been added in the past few weeks with the launch of the custom harvester. So the scraper actually works with more engines then ever.

Hey Loopline - where do I access the custom harvester you are talking about? do you have any links to more info on this at all?

Thanks
T

 

[adamex1970]

Do you guys have issues with the learning mode addon? I've been using it with captcha sniper and I do not know why the addon sends the same captcha when reading a blog like 2-4 times in a row. Captcha sniper solves it, but what's the point in here?

 

[loopline]

Hey Loopline - where do I access the custom harvester you are talking about? do you have any links to more info on this at all?

Thanks
T

Sure, For starters:

http://lmgtfy.com/?q=scrapebox+custom+harvester

10 seconds or less and you have everything there.


Follow that up by its 1 page back in this thread, my video and then if you look in the change log notes when you hit update scrapebox, the video link is there as well. With a little digging it will show up in search here on BHW as well. None the less, here also is the video:

Im not flaming you, but its not to hard to search google. Got to help your self mate, or you will never succeed.

Do you guys have issues with the learning mode addon? I've been using it with captcha sniper and I do not know why the addon sends the same captcha when reading a blog like 2-4 times in a row. Captcha sniper solves it, but what's the point in here?

It works fine for me with captcha sniper. Some blogs have a fixed captcha image or perhaps they are using a method of rotation that is not compatible with scrapebox. If you can give some examples that would be helpful.

 

[turoc]

Im not flaming you, but its not to hard to search google. Got to help your self mate, or you will never succeed.

Hey Loop

Point taken - my apologies - was late, I saw the reference and I know you're the SB guru so I asked.

Thanks for the pointers - will follow up on them now

Later
T

 

[kimber9826]

Sent a few questions to support and still no reply.. I purchased scapebox from the site when I realized I could of gotten it for 40$ cheaper here.. Can someone pls respond to my support email that I have.. The email I sent it from is yvant9826 at gmail.com

Thanks,

 

[adamex1970]

It works fine for me with captcha sniper. Some blogs have a fixed captcha image or perhaps they are using a method of rotation that is not compatible with scrapebox. If you can give some examples that would be helpful.

It's just with all those popular wordpress captcha blogs. I am always sorting out recaptcha and other captchas. What's interesting recatpcha is not appearing twice the same - despite captcha sniper is not able to solve it. What are the best connection settings? I tried even 1 thread with various timeout, but it always hangs after like few thousands links being processed.