[BETA] Instagram Automation Bot | GMT2

Glad to hear you are back. I hope you had a good vacation

cooolforce said:

After the recent closing of thread and the rumor of potential virus in the old version. Should I delete the old files and reinstall the whole bot?

Click to expand...

If you want, you can but you will lose all your settings/save.

shizaru said:

I like your IG bot So I have no problems encountered.
Question: Is there a way to edit the account's description in GM2 bot? and putting the website too?

Thank you.

Click to expand...

No, but it will be implemented soon.

How many instances of the bot will you be able to run at once on a pc and how many accounts per instance will it be able to handle at full release?

After the huge loss of massplanner your program is the best comparrasion, i realy like it... But it stucks on the scraping a litle long sometimes.
I just played around with it, can it like and follow at the same time( like same seconds)? Have a nice day. I shure will buy this tool in the future when its bug free

One more important thing, could you make a embeded browser? when u get a phone verification you want to browse and verify with the same device id and such.

kingofwhatido said:

But it stucks on the scraping a litle long sometimes

Click to expand...

I may be wrong but if you see the modules tab then you can find the "Advanced settings" option when you can see there's a safety scape delay. It should be set by default on 5000 ms, so it simply waits 5 seconds before collecting informations from the next user. So if you have many strict filters it may take a few minutes to find some users to follow or posts to like or comment. Sorry for being so chaotic, hope to be useful

Let's say that the Follow Module Timings and Schedule is from 8AM-5PM, and the Unfollowing Module Timings and Schedule is from 7PM-9PM.

I've noticed that when the Unfollow Module is on, and the No Users Scraped-Enable following/Disable Unfollowing is active, this happens:
1. The Unfollow Module will turn off if no users are scraped to unfollow. (which is what should happen when above setting is on.)
2. The Follow Module is turned on (which is what should happen).

Now, no following will be done, if the Follow Module Timings are not within the specified time (7PM-9PM).

Is this supposed to happen? Follow Module turns on, but no followings done because the Timings and Schedule have already passed? Shouldn't the Follow Timings just start following from 7PM-9PM, if No Users Scraped? ie. Use the Timings and Schedule of the Unfollow Module.

If that is the case, what happens if we set the Follow Module Timings from 8AM-9PM, and the Unfollow Module Timings from 7PM-9PM?
Will the Follow Module turn off at 7PM, so that the Unfollow Module starts unfollowing from 7PM-9PM?

It says a maximum of 25 accounts allowed.

I love your bot! it's amazing!
there is only a problem but you has already been you said.
It is recognized as virus but you have already given the solution.
then is perfect!

One bug that I found:
- Scheduled post are working fine in general, BUT if you restart the software, all the previous scheduled posts will fail to post

I'm currently using Spintax for the comments, but since last update it gives me an error (failed to comment on [xxxxx]'s post). Can anyone give me any reasons for this? I had to rewrite my template, but I tried to make it look as it was before the update and I'm sure it worked some time ago

After the program detected as a trojaner by my antivirus prog.

I've cleaned the quarantine and try to reinstall gmt2 but a facing this error


I've started the installation as the admin of course...

X-R0 said:

After the program detected as a trojaner by my antivirus prog.

I've cleaned the quarantine and try to reinstall gmt2 but a facing this error

I've started the installation as the admin of course...

Click to expand...

I've cleared my TEMP folder... and now I can uninstall it.

so please ignore the post or delete it, whatever

cooolforce said:

After the recent closing of thread and the rumor of potential virus in the old version. Should I delete the old files and reinstall the whole bot?

Click to expand...

Yeah, I'm in the same boat... Have to reinstall anyways because my files got quarantined. There goes all my settings.

Is there a limit as to how large, in followers, an account can be?

I keep adding a large 100K+ account and it hangs. Tried stopping and restarting the modules, closing the program. Sometimes it starts for a few minutes, other times it just hangs.

Last error I'm getting is "When requesting an url, the request timed out".

Also, is there a limit as to how many total modules can be on? I read about 45 accounts. Does that mean, 45 accounts each with up to 4 modules (45 X 4)?

dusty neal said:

How many instances of the bot will you be able to run at once on a pc and how many accounts per instance will it be able to handle at full release?

Click to expand...

One instance per pc (you can bypass this easly if you want but no point since all instances use the same save location) You can run asmany accounts as your system can handle in the full release.

kingofwhatido said:

After the huge loss of massplanner your program is the best comparrasion, i realy like it... But it stucks on the scraping a litle long sometimes.
I just played around with it, can it like and follow at the same time( like same seconds)? Have a nice day. I shure will buy this tool in the future when its bug free

One more important thing, could you make a embeded browser? when u get a phone verification you want to browse and verify with the same device id and such.

Click to expand...

Embed browser has been implemented and will be released soon.

Urban Enigma said:

I may be wrong but if you see the modules tab then you can find the "Advanced settings" option when you can see there's a safety scape delay. It should be set by default on 5000 ms, so it simply waits 5 seconds before collecting informations from the next user. So if you have many strict filters it may take a few minutes to find some users to follow or posts to like or comment. Sorry for being so chaotic, hope to be useful

Click to expand...

This is correct if you filters are strict scraping will take long. Disabling or reducing this delay will increase scraping speed hugely. The reason that the delay is so high by default is that for new users it's verry safe

colorme said:

Let's say that the Follow Module Timings and Schedule is from 8AM-5PM, and the Unfollowing Module Timings and Schedule is from 7PM-9PM.

I've noticed that when the Unfollow Module is on, and the No Users Scraped-Enable following/Disable Unfollowing is active, this happens:
1. The Unfollow Module will turn off if no users are scraped to unfollow. (which is what should happen when above setting is on.)
2. The Follow Module is turned on (which is what should happen).

Now, no following will be done, if the Follow Module Timings are not within the specified time (7PM-9PM).

Is this supposed to happen? Follow Module turns on, but no followings done because the Timings and Schedule have already passed? Shouldn't the Follow Timings just start following from 7PM-9PM, if No Users Scraped? ie. Use the Timings and Schedule of the Unfollow Module.

If that is the case, what happens if we set the Follow Module Timings from 8AM-9PM, and the Unfollow Module Timings from 7PM-9PM?
Will the Follow Module turn off at 7PM, so that the Unfollow Module starts unfollowing from 7PM-9PM?

Click to expand...

This is how it's supposed to work. Timings won't disable your module, it will simply cause the module not to run as long as the module is enabled and it's not in the specified timing. If you want a module to work 4 conditions have to be applied:

-The module should be enabled.
-Current time must be in the current timings (if applicable)
-No limits should be hit
-Module should not be paused (currently only possible with unfollow module)

max parker said:

It says a maximum of 25 accounts allowed.

Click to expand...

This will be increased to 75 next update, max operations will also be increased to 16.

angreee said:

One bug that I found:
- Scheduled post are working fine in general, BUT if you restart the software, all the previous scheduled posts will fail to post

Click to expand...

There was a small issue where if usertags or caption were empty, posts would fail to post. This has been fixed.

Urban Enigma said:

I'm currently using Spintax for the comments, but since last update it gives me an error (failed to comment on [xxxxx]'s post). Can anyone give me any reasons for this? I had to rewrite my template, but I tried to make it look as it was before the update and I'm sure it worked some time ago

Click to expand...

Are you able to comment manually via instagram app? You might be temp blocked or something similar.

colorme said:

Is there a limit as to how large, in followers, an account can be?

I keep adding a large 100K+ account and it hangs. Tried stopping and restarting the modules, closing the program. Sometimes it starts for a few minutes, other times it just hangs.

Last error I'm getting is "When requesting an url, the request timed out".

Also, is there a limit as to how many total modules can be on? I read about 45 accounts. Does that mean, 45 accounts each with up to 4 modules (45 X 4)?

Click to expand...

There are people using on larger accounts (250k) I will have to do some tests and see if it's realy because of a number of followers the account.
Timeout means you either have a slow connection or the proxy your are using is slow.

Currently max modules that can run simoultanously is 8 otherwise this may have a to high strain on your network. This will be custimizable in the future.

Why is that the unfollow module doesn't really unfollow many people? :\

I'm using a template, i didn't change any settings i used my own settings before the program "shut down" for those days and even if i have it to unfollow 30-50 ppl per action it will only unfollow 7-10

juanbhzrd said:

Why is that the unfollow module doesn't really unfollow many people? :\

I'm using a template, i didn't change any settings i used my own settings before the program "shut down" for those days and even if i have it to unfollow 30-50 ppl per action it will only unfollow 7-10

Click to expand...

It might be due to your settings. I'm currently unfollowing up to 600 users/day

JJJackson said:

Are you able to comment manually via instagram app? You might be temp blocked or something similar.

Click to expand...

I've tried and I am not blocked from any functionality. I use comments only in the follow mode (to engage more with my potential followers) and these are my settings:

- Like more recent posts
- Amount of posts to like: 0-4
- Chance to like image: 100%
- Comment on liked post
- Comment once per user
{comments with spintax}

I've checked and my comments don't seem so long to be blocked (I can see them in the entire lenght in the comments preview, so they are quite short). I only use the username variable . Tell me if I could help you with any screenshot or logs or whatever if you are going to try to resolve this problem.

Then, if you are looking forward for new updates, I'd have two ideas I've seen on other bots that had been very important to me:

- More variables in the comments (Like I've seen using Spintax in this way: "[Hello | Hi | Good morning] @username" and this produces "Hello username", "Hi username" and "Good morning username", to trick more the IG algorithm);

- DM functionality with Spintax. I usually use it to DM my new followers and ask a poll about what they think about my photos, if they want me to change anything or if they want a S4S or enter in my engagment group (I wait them for answer and then see if their accounts have got the requirements of course).

Thank you for your patience!

JJJackson said:

This will be increased to 75 next update, max operations will also be increased to 16.

Click to expand...

I so look forward to this one *-* !!

How can i start to follow etc??