Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
Hey Loopline! Great video tutorials! Thank you for sharing your knowledge.

I have been away from scrapebox for a while and now just getting back in the scene and for the life of me I can't see the PR checker button on a V2 version. Their sales pitch on the website even shows that button but I dont see it. Did the scrapebox get away with Google pr checker? In older version I could of swear, there was a button to check PR on the right side.
 
I'm trying to use the ping tool with 50 threads, but for some reason, it's always showing Active Threads: 1?

Browser Ping is not checked
 
Hey Loopline! Great video tutorials! Thank you for sharing your knowledge.

I have been away from scrapebox for a while and now just getting back in the scene and for the life of me I can't see the PR checker button on a V2 version. Their sales pitch on the website even shows that button but I dont see it. Did the scrapebox get away with Google pr checker? In older version I could of swear, there was a button to check PR on the right side.

Unfortunately Google switched off PageRank completely, they no longer publish any PageRank values so it's impossible for any site or tool to display PageRank anymore the metric is finished.

In the latest version of ScrapeBox we have updated this with a new metric from Yandex search engine. You can read about the Yandex TIC metric here https://yandex.com/support/webmaster/tic/what-is-tic.xml

I'm trying to use the ping tool with 50 threads, but for some reason, it's always showing Active Threads: 1?

Browser Ping is not checked

Do you have the delay enabled, or do you have only 1 url entered perhaps?
 
So, Sweet,

What would be a good metric for the domain names since Yandex is Russian based engine...Does it still apply? I mean is Yandex TIC compares to Google PR ? What I mean by t"compares" is former PR4 ranks higher in Yandex then former PR3 website? or their TIC algorithm is totally different?
With Google going away from PR system it would be difficult to compare domains. Wonder if they stopped accounting PR as a factor in SERP
 
Okay I really hope it will be fixed soon!

It seems like it's half-fixed. I still get errors pretty often and it also just gets stuck on "processing" pretty often. Is it just me or is it a problem with the addon? It's really annoying because there is no option to only recheck the ones that give an error so I have to recheck the entire list when I get errors.
 
Do you have a updated list of instances where proxies are used and not used? I checked this link and could not see if vanity name checker uses proxies or not. Thanks!
 
The Loop command only loop itself; what can I do to loop all the commands beneath it?
automator.jpg
 
No delay but yes, only one url

So you can't use several threads for 1 url?

No, not by just loading in 1 url. Its 1 thread per url. So just copy and paste/duplicate the url. Its 1 ping per url loaded. So if you wanted 50 pings, load in the same url 50 times. But if you want to ping it 1000 times at 50 threads, you need to load in the same url 1000 times. like

http://www.domain.com/page1.htm
http://www.domain.com/page1.htm
http://www.domain.com/page1.htm
http://www.domain.com/page1.htm
http://www.domain.com/page1.htm
http://www.domain.com/page1.htm
http://www.domain.com/page1.htm
http://www.domain.com/page1.htm
etc...

So, Sweet,

What would be a good metric for the domain names since Yandex is Russian based engine...Does it still apply? I mean is Yandex TIC compares to Google PR ? What I mean by t"compares" is former PR4 ranks higher in Yandex then former PR3 website? or their TIC algorithm is totally different?
With Google going away from PR system it would be difficult to compare domains. Wonder if they stopped accounting PR as a factor in SERP

TIC is not the same as PR. Its just a metric thats available, depending on the market your in it can be really great, but yandex is Russian and Google is based in the US, so those are different markets, although PR was kept for each market globally. But anyway, its not the same.

So if TIC doesn't work for you the moz page authority addon is the best free bulk option.

It seems like it's half-fixed. I still get errors pretty often and it also just gets stuck on "processing" pretty often. Is it just me or is it a problem with the addon? It's really annoying because there is no option to only recheck the ones that give an error so I have to recheck the entire list when I get errors.

It works fine for me. Are you using more connections then you have apis loaded? You should not do that. Also if your using the same apis in multiple instances at the same time or if your using it the backlink checker that will violate the 10 second delay and cause issues.

Also the apis are used in order they are loaded. So if you have 3 apis and it does 30 requests at once (10 per api) and you notice 11-20 are all errors or stuck processing consistently, then api 2 may be bad/blocked/loaded wrong (as in a character missing when you copied and pasted it etc...)



Do you have a updated list of instances where proxies are used and not used? I checked this link and could not see if vanity name checker uses proxies or not. Thanks!

I will try and update that list, its a lot easier in V2 to tell so I hadn't seen anyone ask.

In general if you want to see if proxies are used, just put a fake proxy in the use proxies box. like

111.111.111.111:80

Make sure the use proxies box is checked and run the addon. If it works normally, proxies are not used, if it doesn't work and just timesout proxies are used. However I think by default proxies ARE used in 99% of addons if the use proxies box is checked.

But for your reference, the vanity checker does use proxies. Also if you see a setting, like in the settings file that says "proxy retries" then it uses proxies.

Also if you see a proxy column in the addon it uses proxies.

Platforms-Blog-Wordpress has been removed?

No it is still there.

The Loop command only loop itself; what can I do to loop all the commands beneath it?
View attachment 82037

The loop has to go at the end. It works in sequence from top to bottom, so if you loop first it won't ever make it past that step.
 
Hey is there any chance of you adding the Google play store (https://play.google.com/store?hl=en_GB) as a source for keyword scraping? If not are you aware of any other tools that could be used to scrape from the GP sore? I've done a bit of research but there doesn't seem to be anything nearly as good as SB
 
Hey is there any chance of you adding the Google play store (https://play.google.com/store?hl=en_GB) as a source for keyword scraping? If not are you aware of any other tools that could be used to scrape from the GP sore? I've done a bit of research but there doesn't seem to be anything nearly as good as SB

ScrapeBox has this, if you select the "Android Market Suggestions" it will scrape from the Google Play store.
 
Hi it has been almost 2 months for bug report for proxy manager yet no update?
and facing issue with page authority addon socket error #10054 no matter what either I try normally or with proxies
 
Hi it has been almost 2 months for bug report for proxy manager yet no update?
and facing issue with page authority addon socket error #10054 no matter what either I try normally or with proxies
Why you have to use this Moz addon? For list? Bid on quality domains can earn you much much more $.
 
Hi it has been almost 2 months for bug report for proxy manager yet no update?
and facing issue with page authority addon socket error #10054 no matter what either I try normally or with proxies

10054 is

Connection reset by peer.

An existing connection was forcibly closed by the remote host. This normally results if the peer application on the remote host is suddenly stopped, the host is rebooted, the host or remote network interface is disabled, or the remote host uses a hard close (see setsockopt for more information on the SO_LINGER option on the remote socket). This error may also result if a connection was broken due to keep-alive activity detecting a failure while one or more operations are in progress. Operations that were in progress fail with WSAENETRESET. Subsequent operations fail with WSAECONNRESET.



Something outside of Scrapebox is causing this. You might need this hotfix

https://support.microsoft.com/en-us/kb/981344
 
Status
Not open for further replies.
Back
Top