Permanently Closed Marketplace Sales Thread

[loopline]

long time no see loopline, let me try it too

use it for 3 hours to test new feature, found 2 bugs :
- in harvesting proxy, it will take forever to stop
- when harvesting url then press pause button, it got stuck

i take ss for it, if u allow me to beta test it and send every bug report, i'm gladly to help

You can use V2 as much as you like and please do send in the reports. Does it get stuck with less engines? You have to bear in mind all those engines you have selected all have their own arrays in memory. So when you hit pause it may take a while for everything to catch up, and also your system may not be able to handle it if it does not have enough free resources. Does it give an error at any point?

I have just bought the automator plugin. How does it activate and how long does it take to activate? I bought the plugin from one scrapebox instance while keeping another instance running and harvesting. Hope that does not create any problems and I suppose the automator would be activated for all the instances in the VPS. Thanks for the awesome support and explanations as always. And kindly release the next version to fix the proxy speeds not showing up bug.

Up to 12 hours to activate, then just go back to the plugins menu and double click it to install it. It will activate for all instances.

Anyone else having problems with the harvester? SB64b v2036
Windows server 2008, 64 bit vps, good specs, 4 core 11k mhz, 8gb ram
The bar jumps to 100% straight after starting with thousands of keywords - it shouldn't happen obviously.
This has happened to me since v2.032. I'm not using server side proxies. Just banditim proxies.
These worked fine on v2.032, however on current version 36 and 35 they've gone nuts.
I've run samples with both simple kws and with advanced operators. Same results. The result bar jumpt to 100% right off the bat and it only works for a short time.
Custom harvester is used on g123gl3.

Well a similar thing happened, but I think its just due to how it all works. Bandit has become more popular and their pool of ips get blocked more quickly then they did in the beginning. So Scrapebox just uses them until they are all banned and then quits, if they are all banned or close to banned from the beginning it thinks they are done. Scrapebox doesn't know they are back connect proxies that rotate on the back end. So what I have done is to set them to replace every 10 minutes and place the bandit proxies in a file and select that file. Bandit will replace the ips every 10 mins and then Scrapebox knows if all ips come up as blocked, wait 10 mins and try again. Else you can just have it replace them when it runs out of proxies, but that seems slower with bandit proxies and since you know they get replaced every 10 mins it make sense. But I think overall bandit is being blocked more quickly then before. I don't know how often his pool of ips rotate exactly, but its just how it all works together when things get more popular.

Help, please:

I run SB on my WinVPS.

Went to SB for first time in few weeks today - saw need to upgrade to latest V - did this.

Now, SB won't start, just flshes for 1/2sec on screen but won't run.

Suggestions, please?

Thank you.

Each version gets a new MD5 hash, which means security software can see it as a completely different program. One of your programs is either holding Scrapebox and scanning it "forever" or just killing the process. Make sure you set Scrapebox as trusted/allowed in all anti-virus, malware checkers, firewalls etc..

I use private proxies to make sure they are country specific.
How do I set the proxies for the RankTracker plugin on V2?

Just load them in the main Scrapebox window and click the use proxies box. THEN launch the rank tracker, and it will pull those ips automatically.

For Google test results i get failed connection time out and the proxie leaks your ip
how can i fix this ?

Get new proxies. This just means your proxies are bad and/or they are not anonymous. So unless they are back connect proxies, you just need new proxies.

 

[Sweetfunny]

ScrapeBox v2.0.0.37 Beta Released

• Fixed an issue with ansi/utf=8 encoding
• Fixed a bug in Proxy Manager related to the grid display (speed)
• Added more Harvester settings under Settings->Connections, Timeouts and Other Settings

Only a few changes as the last update was only a few days ago, and one change was urgent it addresses the BanditIm proxy issue below.

Anyone else having problems with the harvester? SB64b v2036
Windows server 2008, 64 bit vps, good specs, 4 core 11k mhz, 8gb ram
The bar jumps to 100% straight after starting with thousands of keywords - it shouldn't happen obviously.
This has happened to me since v2.032. I'm not using server side proxies. Just banditim proxies.
These worked fine on v2.032, however on current version 36 and 35 they've gone nuts.
I've run samples with both simple kws and with advanced operators. Same results. The result bar jumpt to 100% right off the bat and it only works for a short time.
Custom harvester is used on g123gl3.

Yes it worked fine in previous versions, however someone was complaining the harvester ran slow when they were running 8,000 connections and free proxies. So we changed the harvester to remove dead proxies to try and cut down on the time the harvester was spending retrying thousands of dead proxies. This caused a negative effect for BanditIM and other back connect proxy users because when one proxy from the pool was dead it would remove the front end proxy you load in to ScrapeBox, and would quickly deplete all the loaded IP's.

So in v2.0.0.37 under Settings >> Connections, Timeout and Other Settings >> More Harvester Settings tab, you will now see this:

If you are using BanditIM or other similar back connect proxies, you will probably want to untick "Remove Failed Proxies". Also you could try tweaking the other settings on this tab to get a balance between speed and volume of results by raising the retries etc.

 

[TheSEOWizard]

Up to 12 hours to activate, then just go back to the plugins menu and double click it to install it. It will activate for all instances.

Thank you. It was activated in a few hours. I had setup a proxy harvest task yesterday with both scrapebox sources as well as my own sources and saw the filtered proxies saved a few hours later. It saved like 3700 proxies as passed anonymous. So, I was a bit surprised as the sources do not return such high number of anonymous proxies. Then I removed duplicates and it was just a few hundred proxies. So, is there no way to remove duplicate proxies in the automator task between the harvest proxies and test proxies command. It makes logical sense to remove duplicate proxies from harvest before testing.

 

[rebornishard]

i prefer to send it here, i tried with all engine = stuck, tonight i'll try with less engine, i click pause and waiting for 2 hours, still not finished up, is there any file in my sb dir that can help ?
i use 5 gb ram and do nothing, just open sb, another error comes when harvest proxy, hang when stop it

thanks

You can use V2 as much as you like and please do send in the reports. Does it get stuck with less engines? You have to bear in mind all those engines you have selected all have their own arrays in memory. So when you hit pause it may take a while for everything to catch up, and also your system may not be able to handle it if it does not have enough free resources. Does it give an error at any point?

when i press merge with keyword, it do nothing
to find trackback use this one right :
site:.co.my "trackback"

thanks

site:.co.au "powered by wordpress"
site:.co.my "powered by wordpress"
site:.guru "spam your links here"
site:.co.cn "powered by wordpress"

 

[loopline]

Thank you. It was activated in a few hours. I had setup a proxy harvest task yesterday with both scrapebox sources as well as my own sources and saw the filtered proxies saved a few hours later. It saved like 3700 proxies as passed anonymous. So, I was a bit surprised as the sources do not return such high number of anonymous proxies. Then I removed duplicates and it was just a few hundred proxies. So, is there no way to remove duplicate proxies in the automator task between the harvest proxies and test proxies command. It makes logical sense to remove duplicate proxies from harvest before testing.

The harvester should remove duplicates automatically when it gets to the testing stage. Was the harvesting all in 1 run or separate runs merging the file together? What version are you using?

i prefer to send it here, i tried with all engine = stuck, tonight i'll try with less engine, i click pause and waiting for 2 hours, still not finished up, is there any file in my sb dir that can help ?
i use 5 gb ram and do nothing, just open sb, another error comes when harvest proxy, hang when stop it

thanks


when i press merge with keyword, it do nothing
to find trackback use this one right :
site:.co.my "trackback"

thanks

Yeah, that is probably fine for trackbacks. Do you get an error? You should be able to click merge and select a file and it will merge the file with the keywords.

Your urls are saved in the harvester sessions folder in your main scrapebox folder, so they are not lost.

 

[spiritfly]

So we changed the harvester to remove dead proxies to try and cut down on the time the harvester was spending retrying thousands of dead proxies. This caused a negative effect for BanditIM and other back connect proxy users because when one proxy from the pool was dead it would remove the front end proxy you load in to ScrapeBox, and would quickly deplete all the loaded IP's.

This is such a great feature! I can't express how excited I am about all these new settings for the proxies and error retries! It works marvelously well with large amount of threads/free proxies! I've experimented with them and it can be fine tuned even more to get some more speed!

I actually think that proxies depletion can be an advantage if scrapebox would immediately stop the harvesting session as soon as it detects that the proxies have been depleted to 0 instead of hanging infinitely and giving errors. This way the session could just stop whenever a bad footprint causes a ban on all proxies and prevent further abuse on the proxies.

 

[rebornishard]

The harvester should remove duplicates automatically when it gets to the testing stage. Was the harvesting all in 1 run or separate runs merging the file together? What version are you using?



Yeah, that is probably fine for trackbacks. Do you get an error? You should be able to click merge and select a file and it will merge the file with the keywords.

Your urls are saved in the harvester sessions folder in your main scrapebox folder, so they are not lost.

Thanks loopline, yes it happen only with heavy ram usage,
i wanted to ask something, scrapebox has ping feature, but i cant find it in platform chooice, is that already not used anymore or we must use manual/custom footprint for it.
And is there any guide for each platform, or it's general use like blog commenting
thanks

 

[daymos]

How I can use de-capcher service like antigate? (anti-captcha)

 

[realgreeny1232]

I think the vanity add-on update broke something. It is now checking 1 at a time .. waits for it to come back and say available or not then does the next .. takes at least 20 sconds for each one. I have proxies disabled, checked all my settings too. I have it set at 30 connections

 

[loopline]

Thanks loopline, yes it happen only with heavy ram usage,
i wanted to ask something, scrapebox has ping feature, but i cant find it in platform chooice, is that already not used anymore or we must use manual/custom footprint for it.
And is there any guide for each platform, or it's general use like blog commenting
thanks

Pinging is only about inflating traffic, its not the type of ping for indexing links. You would need to use the rapid indexer addon or RSS ping or just build links to the urls you want to index etc...

How I can use de-capcher service like antigate? (anti-captcha)

You would need to use an emulation service and have antigate emulate decaptcher. Just ask them, they probably have software that will do this.

I think the vanity add-on update broke something. It is now checking 1 at a time .. waits for it to come back and say available or not then does the next .. takes at least 20 sconds for each one. I have proxies disabled, checked all my settings too. I have it set at 30 connections

Try to uninstall it and reinstall it, and restart Scrapebox. Im guessing you might have a ini file thats not getting updated, but Im only guessing. It works fine for me and I can't reproduce it.

 

[blacat]

RankTracker v1 had a check box next to each search phrase... so we could run a ranking check on portions of a project... in v2 we must run the entire project list. Any chance the checkbox will be available in v2 as well?

Also the "change" column doesn't display the change if it's different than "0" unless you hover it.

 

[mindmaster]

Is V2 able to post to all platforms or does it need to be trained?

 

[daymos]

You would need to use an emulation service and have antigate emulate decaptcher. Just ask them, they probably have software that will do this.

They don't have any emulate software. Please, add antigate (anti-captcha) to Scrapebox. This service very useful in xUSSR Internet since 2007. ~$1 per 1k captchas.

 

[loopline]

Is V2 able to post to all platforms or does it need to be trained?

It comes with all the platforms listed, 32 I think and then also 3 contact forms prebuilt.

 

[macdonjo3]

Question for SweetFunny or anyone that knows her answer to this:

Since Delphi can build for Windows and Mac, why isn't ScrapeBox available for Mac?

Although I'm a customer, I'm asking this not because I need ScrapeBox on Mac, but because I'm a programmer who admires your work and wants to learn from your choices. I need to find a new cross-platform programming language. I might go with Java, but the fact that ScrapeBox is built in Delphi means a lot.

 

[Sweetfunny]

ScrapeBox v2.0.0.38 Beta Released

• Added "Export all URL's as URL Encoded Ansi File" to Export Url button and harvester grid popup menu
• Fixed a bug related to dead proxy handling in harvester
• Fixed a bug in keyword scraper related to proxy retries
• Fixed: Several RankTracker issues

Question for SweetFunny or anyone that knows her answer to this:

Since Delphi can build for Windows and Mac, why isn't ScrapeBox available for Mac?

Although I'm a customer, I'm asking this not because I need ScrapeBox on Mac, but because I'm a programmer who admires your work and wants to learn from your choices. I need to find a new cross-platform programming language. I might go with Java, but the fact that ScrapeBox is built in Delphi means a lot.

It's not like you can just click a button and have it spit out a mac version, getting ScrapeBox converted to a Mac application would be far more work then is viable unfortunately.

 

[VoltzRo]

Hello,

I have a problem with Manual Poster.
I load lists of name, email, my site, commnent and harvested url, I push on Start Poster, clicked on the first link, but SB will not fill the name, email, website and comments. If I right click on tab name I do not have the option to random put a name there like in SB V1. What's rong ?

 

[Fear2403]

can this software check auto or not approval?

 

[ttt123]

Hey Sweetfunny make in Keyword Scraper button to add in one click postfix/prefix a-z0-9, now i need help notepad++

 

[loopline]

Hello,

I have a problem with Manual Poster.
I load lists of name, email, my site, commnent and harvested url, I push on Start Poster, clicked on the first link, but SB will not fill the name, email, website and comments. If I right click on tab name I do not have the option to random put a name there like in SB V1. What's rong ?

Its possible it doesn't understand the form. Can you post some example urls?

can this software check auto or not approval?

You mean if a site has auto approve links? Just try and post and then check to see if the link is live. I have a video here:
https://www.youtube.com/watch?v=jYLvarYF6hI

But yes it can.

Hey Sweetfunny make in Keyword Scraper button to add in one click postfix/prefix a-z0-9, now i need help notepad++

That is already there. Are you using V2?

http://www.scrapebox.com/v2-beta