Permanently Closed Marketplace Sales Thread

[gtothem]

Version 0.144b
[+] Profile: Full Name

 

[ozzke]

Is there a general cooldown on Mentions/tweets? I have a list of people I want to reach, I get "Index was out of range. Must be non-negative and less than the size of the collection" (what's the limit there?)
First one goes through, next one always gets "403" when I do it 1-2 mins later.

 

[iamkhan2]

I notice two small issues today when i was getting some work done

1. When using the autopilot if i set the end time to a lower value than the begin time ie (8:30am to 3:00am) i receive a min/max error

2. The scrape users followers module doesnt seem to be working for me

 

[erichon]

What does it say on history when you get the error?

History says: The operation has timed out

It is strange - sometimes it connects to twitter, then I press sync and then I get the timeout error. When I try my account, everything works fine.

 

[gtothem]

Is there a general cooldown on Mentions/tweets? I have a list of people I want to reach, I get "Index was out of range. Must be non-negative and less than the size of the collection" (what's the limit there?)
First one goes through, next one always gets "403" when I do it 1-2 mins later.

First one means that is new. Next one 403 means you already did that. You are probably running into problems because you are trying to mention the same people over and over?

I notice two small issues today when i was getting some work done

1. When using the autopilot if i set the end time to a lower value than the begin time ie (8:30am to 3:00am) i receive a min/max error

2. The scrape users followers module doesnt seem to be working for me

1. The start and end timer works from 00:00 to 24:00 and you must start earlier than finishing.
2. What message do you get in history when trying to scrape?

History says: The operation has timed out

It is strange - sometimes it connects to twitter, then I press sync and then I get the timeout error. When I try my account, everything works fine.

Operation timed out means you didn't connect to Twitter within the Proxy Timeout time in the Settings. Either your connection is bad or Twitter is blocking you/responding slow.

 

[erichon]

I get the timed out error as well. I log in to account then sync, and after a while I get Sync following error - history: connected - logged in - the operation has timed out - 0 complete 1 error in 32 seconds - report sync created

Any idea?

 

[gtothem]

I get the timed out error as well. I log in to account then sync, and after a while I get Sync following error - history: connected - logged in - the operation has timed out - 0 complete 1 error in 32 seconds - report sync created

Any idea?

I just released an update which hopefully fixes this problem.

Let me know if you continue to have problems.

 

[ItsBlinkHere]

So i've been mainly seeing questions around this thread and I thought I would give a little feedback instead(for new users who don't want to read all the way through this 18 page thread)
This software isn't a kid friendly toy, rather its a profesional high quality badass tool is that under constant development. It handles hundreds of accounts like a charm! It has lots of options that I just havn't found in other bots. For example.. you have 100 accounts, and you want to change all the different passwords to be one password...about 3 clicks later, its done! About a week ago I put in 100 accounts and set them on autopilot...three days later I had over 1000 followers. That pretty awesome for something totaly automated.
The best thing is the support. He is always very helpful and most issues are solved on the spot. Very much recomended.
____________________
Just a little something I would like to know from others that have bought this bot also. Does it work good on VPS? How much RAM would I need to run 1000 accounts on autopilot?
How many threads could I run on a 2GB RAM VPS? I would like to know because i'm thinking of running this thing 24/7 on the cloud.
Thanks
Blink

 

[gtothem]

So i've been mainly seeing questions around this thread and I thought I would give a little feedback instead(for new users who don't want to read all the way through this 18 page thread)
This software isn't a kid friendly toy, rather its a profesional high quality badass tool is that under constant development. It handles hundreds of accounts like a charm! It has lots of options that I just havn't found in other bots. For example.. you have 100 accounts, and you want to change all the different passwords to be one password...about 3 clicks later, its done! About a week ago I put in 100 accounts and set them on autopilot...three days later I had over 1000 followers. That pretty awesome for something totaly automated.
The best thing is the support. He is always very helpful and most issues are solved on the spot. Very much recomended.
____________________
Just a little something I would like to know from others that have bought this bot also. Does it work good on VPS? How much RAM would I need to run 1000 accounts on autopilot?
How many threads could I run on a 2GB RAM VPS? I would like to know because i'm thinking of running this thing 24/7 on the cloud.
Thanks
Blink

Thanks for the feedback, glad you like it.

The auto-pilot uses around 15mb of RAM for every active thread. I really wouldn't know the math on the average amount of threads active at any given time based on 1000 accounts but 100 active auto-pilot threads would be around 1.5gb.

 

[ItsBlinkHere]

The auto-pilot uses around 15mb of RAM for every active thread.

Thanks...that will give me a good basepoint to figure with. I'll start monitoring my accounts to see how many threads are needed at any given time for X amount of accounts. Fast internet on a VPS should make each task finish way fast, resulting in less needed threads. I'll see what kind of figures i'll come up with. I might come back and post them here for the record.
Thanks
Blink

 

[badman32]

Is there any way to prevent tweets being tweeted to someone you already tweeted? Having issues where the same tweet is being sent multiple times to the same user.

 

[erichon]

Hi
is there any good manual on how to use the software? I want to reply to a list of people with a spinned tweet. Can't figure out how to do this

 

[lostgringos]

Thanks for the feedback, glad you like it.

The auto-pilot uses around 15mb of RAM for every active thread. I really wouldn't know the math on the average amount of threads active at any given time based on 1000 accounts but 100 active auto-pilot threads would be around 1.5gb.

Ok, so it sounds like you would need at least 2 gb of RAM to run 1,000 accounts. You would need a very good VPS also along with a mess of private proxies. 3.2 Ghz 4096MB 85 GB
3.2 Ghz (1x3.2 Ghz)

How about this?
4096 MB DDR3 RAM
85GB Disk Space
1GB Port Unlimited Traffic
Windows 2008
1 IP
Remote Reboot Control Panel
XenServer Virtualization Technology

What would be your dream VPS for running 1,000 accounts? How many private proxies? How many followers per account on a daily basis?

How to find various money making niches to get a good ROI.

 

[gtothem]

Is there any way to prevent tweets being tweeted to someone you already tweeted? Having issues where the same tweet is being sent multiple times to the same user.

What function are you using to Tweet people (mention, reply search etc..) accounts using any Search does already check if they did a certain Tweet/User.

Hi
is there any good manual on how to use the software? I want to reply to a list of people with a spinned tweet. Can't figure out how to do this

You can either use Tweet > Mention or Reply List

Mention - Load a list of users to mention then load a list of tweets to use or load 1 tweet with spintax

Reply List - Enter search terms then load a list of tweets or load 1 tweet with spintax

Ok, so it sounds like you would need at least 2 gb of RAM to run 1,000 accounts. You would need a very good VPS also along with a mess of private proxies. 3.2 Ghz 4096MB 85 GB
3.2 Ghz (1x3.2 Ghz)

How about this?
4096 MB DDR3 RAM
85GB Disk Space
1GB Port Unlimited Traffic
Windows 2008
1 IP
Remote Reboot Control Panel
XenServer Virtualization Technology

What would be your dream VPS for running 1,000 accounts? How many private proxies? How many followers per account on a daily basis?

How to find various money making niches to get a good ROI.

I'm sure that VPS could run 1000 auto-pilots.

I have always heard 5 accounts per IP is safe. I've never had problems using around 5 per IP but maybe you can go higher and still be safe - if you have 1000 accounts then perhaps you should do your own testing.

You can search forums like BHW. Here is an example.

 

[erichon]

Hi

the scrape modul somehow does not work. I scrape a certain users followers, it starts scraping but nothing happens. Does it safe the scraped results to a list?

 

[gtothem]

Hi

the scrape modul somehow does not work. I scrape a certain users followers, it starts scraping but nothing happens. Does it safe the scraped results to a list?

What does it say in History?

 

[erichon]

It says Good - Scrape started for xxxxxx (that was 8 hours ago)

 

[gtothem]

It says Good - Scrape started for xxxxxx (that was 8 hours ago)

This is odd because the bot should either begin adding to the scrape list or eventually it will timeout and end the task after a few minutes.

Make sure your scrape window is definitely empty. Try scraping from a different user and also try using a different account or proxy.

If you still have issues then screenshot your history + scrape window or add me on skype demo_gm.

 

[ItsBlinkHere]

What would be your dream VPS for running 1,000 accounts? How many private proxies? How many followers per account on a daily basis?

I have 250 private proxies that i'm using so it should run 1K account no problem. If you search for the right words when you are on autopilot you get a high follow back rate. My new accounts follow an average of 10 peeps per day and get 6-8 followers back. Do the math, 1k acounts X 6 followers a day = 6K. I know i can push my accounts way more per day, but they are new and I don't want to get them suspended. After they are older and you start following 100 or 200 a day. You can kindof start to have a large potencial network...

 

[badman32]

What function are you using to Tweet people (mention, reply search etc..) accounts using any Search does already check if they did a certain Tweet/User.

I'm using the AutoPilot feature