Permanently Closed Marketplace Sales Thread

[indianagent]

Now that makes more sense!

I feel bad having so many questions but my goal is to really master this piece of software.

So a question about private proxies. How many private proxies does one use to harvest say 400-800K urls a day? And do these private proxies ever die out? (especially since I'm paying a monthly on them).

 

[americotomas]

why cant i buy it? ive been trying for 2 days

 

[scrapefox]

why cant i buy it? ive been trying for 2 days

Use the support form on their website, you'll no doubt get a faster response there.

 

[loopline]

Can someone explain something to me regarding scrapebox? My question is, if someone has a list of eg. 50K Autoapprove websites, can they be used on any niche? I thought the autoapprove links are only for the keywords that you chose..

Its really hard to qualify a site for a niche. Even google is way off if you dig much past the first few pages. You can search for seo in Greenland and wind up with a site on lawn care in South Americal. So most AA lists are general niche, meaning a mix of many niches.

Another question I had, say I harvest 200k urls and I want to check for auto approve, do you guys use your main site for fastpost commenting just to check for auto approval urls?

I have an aged that where I'm trying to build tier 1 slowly but I don't want to post any spam for it. I just want a list of AA sites on the side to keep down the road. What do you guys normally do when commenting?

http://www.carmichjklhiuyiuhu.com/kkk3hh8u

As mentioned above, don't use your real site.

Now that makes more sense!

I feel bad having so many questions but my goal is to really master this piece of software.

So a question about private proxies. How many private proxies does one use to harvest say 400-800K urls a day? And do these private proxies ever die out? (especially since I'm paying a monthly on them).

I don't keep that close of track, but I know with 50 private proxies I can easily harvest a million urls in less then 12 hours, so Id "guess" somewhere in the 20-30 range, maybe less. Harvesting with private proxies is really fast, even on low connections. I have a vid on it:

[video=youtube_share;Ri6cci288vk]http://youtu.be/Ri6cci288vk[/video]

Also bear in mind google just recently tightened down the tolerance, so you might need to start swaying closer to the 1:10 ratio mentioned in the vid vs the 1:5, especially with advanced operators. For regular search I use 1:5 still but I use a higher ratio for operators as even stuff like site: was getting banned. Also there are lots of other engines that you can use, and I take advantage of that too.

why cant i buy it? ive been trying for 2 days

Yeah as scrapefox says, use the support form, worst case you can send the money directly to them, even if the link gives you issues. Also it may be to do with your paypal account, so you might need to contact paypal.

http://www.scrapebox.com/contact-us

 

[Sweetfunny]

A couple of updates...

ScrapeBox 1.15.71:
New: Email grabber rewritten to support https urls
New: More fixed proxy sources added
New: Proxy manager Keep and Remove selected ports
New: Random delay adjustable in seconds
Fix: YouTube keyword scraper fixed
Fix: RSS Ping
Fix: Google Index Checker
Fix: Proxy harvester speed improved

Addons:
New: SEOmoz Page Authority Addon http://www.scrapebox.com/page-authority-addon
New: Google images addon select image usage rights
Fix: Outbound Link Checker speed enhancements
Fix: Domain Resolver addon
Fix: Page Scanner addon
Fix: Alive Checker addon

Automator: http://www.scrapebox.com/automator-plugin
New: Automator command LOOP
New: Automator compatible with OutBound Link Checker

RankTracker: http://www.scrapebox.com/ranktracker-plugin
New: Scheduler

Article Scraper: http://www.scrapebox.com/article-scraper-plugin
New: Batch Poster
New: WordAI Spinner Support
New: Post Articles to Tumblr
New: Keyword Density stats
New: Support for multiple synonym databases
New: One click auto spin article

 

[Loco Penguin]

Hi Sweetfunny
Is it possible to add the type of scheduler you've added to the rank tracker, to the Automator Plugin in SB?
That would be great if SB could run the jobs automaticly, or even to allow the activation of the automator files without the need to open them form SB, to allow to schedule them with windows task scheduler.

Thanks!

 

[proxygo]

says my current version 70 but no option to
update to .71 . any news on an update for the proxy
checker, seems s/box google pass rate just dropped another
40% on public scraped and port scanned proxies

 

[indianagent]

Sweetfunny I also have a suggestion for you. Can we have a pause button while harvesting urls as well as being able to add more fresh proxies in the list?

I was harvesting 400k urls and by the time it got to 200k urls my proxies died out and I had no choice but to hit abort. I would like to be able to pause it, add new proxies and continue harvesting with new proxies.

Thanks for all the other updates!

 

[Sweetfunny]

Hi Sweetfunny
Is it possible to add the type of scheduler you've added to the rank tracker, to the Automator Plugin in SB?
That would be great if SB could run the jobs automaticly, or even to allow the activation of the automator files without the need to open them form SB, to allow to schedule them with windows task scheduler.

Thanks!

This might appear in a future version, the scheduler would need to be added to ScrapeBox itself because the Automator plugin just designs the job files and it's ScrapeBox that runs and executes them.

says my current version 70 but no option to
update to .71 . any news on an update for the proxy
checker, seems s/box google pass rate just dropped another
40% on public scraped and port scanned proxies

Please try the update again it should be working. Also the proxy harvester is updated in this release, there's now 24 proxy sources added returning about 20,000 proxies in total because recently Google started blocking proxies quicker. Also added is the ability to remove or keep proxies with specific ports, and a speed increase when harvesting proxies from the sources.

Sweetfunny I also have a suggestion for you. Can we have a pause button while harvesting urls as well as being able to add more fresh proxies in the list?

I was harvesting 400k urls and by the time it got to 200k urls my proxies died out and I had no choice but to hit abort. I would like to be able to pause it, add new proxies and continue harvesting with new proxies.

Thanks for all the other updates!

The custom harvester can do this automatically, it can harvest and test proxies while it's harvesting urls.

You can set how many proxies you want it to fetch and to replace them every X minutes. Also when it's doing this you can set it to use the loaded proxies, use the proxy sources or scrape proxies directly from Google using a 24 hour timespan search or you can pull proxies from all 3 places at once.

 

[indianagent]

Thanks SweetFunny!

This just made my life so much easier!

 

[proxygo]

cheers sweet, its blocking proxies so fast even those i
port scan have fallen in the last 2 days from 2k per list
to just over 1k - thats a massive drop.

also on scraped proxies over the last 2 days from a list
of sasy 3k test usually ude get 3-400 g passed
thats down to a couple of hundred.

seems all those that use to show google passed
turned to google failed but anonymous
ps got update now - working

ps - tried the new proxie links even though i dont use scraped proxies
19k out - 2665 live - 180 google passed
google has come down hard in last few days

 

[ZeroFear]

Just ordered this software and I am ready to learn as much as I can from this. Loopline's videos really help.

 

[cipango]

Folks, for those of you who use the Outbound Link Checker plugin, there's tremendous improvement in the latest version (1.0.0.19). You can now load a 500k long list into it without fear it will crash. It now consumes very little RAM too. I also don't see the timeout blocks I was seeing before and that I had to rerun.

Whoever knows how time-consuming it was to OBL check a large list, will totally appreciate the new ease of use. Kudos Sweetfunny and team, I know you made at least one happy camper!!!

 

[Legends71]

How can i scrape url for GSA ???
different platform (web2.0, article, video) ?

 

[loopline]

How can i scrape url for GSA ???
different platform (web2.0, article, video) ?

You would need footprints. I don't know what the footprints are for the platforms that GSA supports, but no doubt if you search here on BHW and on google you will find a nice long list of them.

Then just put a footprint in the top box by the M and then put your keywords in the bottom keyword box and scrape. Repeat for each footprint you want.

Or you can use the merge option to mass merge keywords and footprints, just don't get too large of a list of resulting queries, try to stay under 200K keywords or less if your on a machine with less then 2GB of available memory/RAM.

http://scrapeboxfaq.com/how-do-i-use-tokens-with-the-m-merge-option

 

[RyanGibbs]

Is the page authority addon working fine for everyone? I am getting Error 401's despite following account setup instructions (and checking against loopline's vid). Am getting the 401's on both of my 2 different moz accounts and with and without private proxies assigned.

 

[Sweetfunny]

Is the page authority addon working fine for everyone? I am getting Error 401's despite following account setup instructions (and checking against loopline's vid). Am getting the 401's on both of my 2 different moz accounts and with and without private proxies assigned.

I just tested it and it's working for me. Error 401 is "Unauthorized" so i assume it's an issue with your account setup, the format is:

Access ID|Secret Key

Or if you want to attach a proxy to that particular account use:

Access ID|Secret Key|IPort

So just double check you have it setup right, and you are running the latest version of the addon.

 

[Legends71]

You would need footprints. I don't know what the footprints are for the platforms that GSA supports, but no doubt if you search here on BHW and on google you will find a nice long list of them.

Then just put a footprint in the top box by the M and then put your keywords in the bottom keyword box and scrape. Repeat for each footprint you want.


Or you can use the merge option to mass merge keywords and footprints, just don't get too large of a list of resulting queries, try to stay under 200K keywords or less if your on a machine with less then 2GB of available memory/RAM.

http://scrapeboxfaq.com/how-do-i-use-tokens-with-the-m-merge-option

How can i check if the link is AutoAproved ???
Because i have scrapped url with footprint Article .. And i cant check if the url is autoapproved because the url is not blog commentating.

 

[proxygo]

and sweet just wanna say ty for the pms.
anyone who says sweet never replys is quashed

 

[RyanGibbs]

I just tested it and it's working for me. Error 401 is "Unauthorized" so i assume it's an issue with your account setup, the format is:

Access ID|Secret Key

Or if you want to attach a proxy to that particular account use:

Access ID|Secret Key|IPort

So just double check you have it setup right, and you are running the latest version of the addon.

Checked again and the setup is correct. Did you use a free moz account or a paid one for your test sweetfunny? Guess it could be something wrong with authentication on Moz's side for my credentials. Ugh...troubleshooting.