Post to them all and use link checker to see what links stick right away.
Permanently Closed Marketplace Sales Thread
- Thread starter Sweetfunny
- Start date
- Status
Post to them all and use link checker to see what links stick right away.
- Jan 25, 2009
- 6,378
- 3,774
Well then just leave the settings just like they are out of the box. Timeouts its how long you want scrapebox to wait on a page to load or something to complete, before skipping it and moving on.
Connections is the number of connections/websites to use/load at once. Lower connections and higher timeouts is always a safe place to test and then you can increase them and test.
Private proxies are just more reliable and consistent for use with scrapebox, but you don't "need" them. You can use public proxies for scraping. For posting private proxies will give you a much higher success rate then public proxies will.
VPN controls all out bound traffic, so just leave the use proxies box unticked and if you are using a VPN, like say HMA, then you can just it for scraping and posting, although your IP will get banned pretty quick when scraping if you don't use a delay, proxies are "easier" and quicker for scraping then a VPN.
There is a pause in some elements of scrapebox, but not most.
To exclude already posted lists you can just save off the list you have already posted to, Id just save off successful. Then when you load in your new list in the URLs harvested section, just go to import and compare on url - and then select the list that you saved off from successful posts. That will remove those urls from your new list. Then just keep saving off each successful list and just include it in the files you select for import and compare.
Alternatively you can import and compare on the domain level which will remove urls based on an entire domain rather then just the individual url.
Its how deep you want to go. Level 2 takes your original keywords and scrapes for results, then takes the results and shoves them back over on the left (after removing dupes) and then scrapes for those as well. The move levels deep you go the more its repeated.
Successful posting is often confused with link stick rate. When a comment is submitted to a blog, it just means it was successfully submitted. Most of the time it will then go to a moderator and must be approved before it goes live. Link stick is when the link is live. If you post and then check links, the only ones that are going to immediately show up is auto approve links. Here is a video that goes more into depth on it:
http://www.youtube.com/user/looplinescrapebox#p/u/16/kpRAqHfDqVc
As scrapefox said, but here is a video:
http://youtu.be/jYLvarYF6hI
You would need a footprint for article directories. I don't scrape them so I don't have a footprint, but you can google for one or just search here.
Here is a video on footprints in general.
http://youtu.be/I2uTN3ngAAU
My Central Resource for all things scrapebox:
http://www.scrapestuff.com/scrapebox-resources
Don't be afraid to dive into the 100+ videos I have. There is a lot of info in there, including the answers to all of the above questions.
indianagent
Regular Member
- Dec 18, 2009
- 271
- 58
What is the Max number of keywords I should use when harvesting?
Also how many private proxies do I need to do the job. (in case I have a 200k list of urls)
Also how many private proxies do I need to do the job. (in case I have a 200k list of urls)
Yes Deviatus, also getting the same message.
Working fine here, though not sure if you're still getting the problem as I realise your posts were a while ago.
Black Hat Expert
BANNED
- Dec 27, 2010
- 396
- 302
Thanks i think this is very good price compared to market.
- Jan 25, 2009
- 6,378
- 3,774
Well you can't force a site to be auto approved, so you just need to keep working. So on average 1%-2% of all urls that you just scrape up are auto approve. Sometimes less then 1%. So if you want 1000 auto approve blogs you have to scrape and post to 100,000 and then link check all the successful to get your 1000 auto approve. Ballpark anyway.
So just keep working, I have a vid on how to do it here:
http://youtu.be/jYLvarYF6hI
I wouldn't put in more then about 800K keywords and thats if you have multiple gigs of available free RAM. Else Id go for 100K-300K or so ish.
You need at least 5 private proxies to scrape on 1 connection. I have a video explaining how to scale it here:
http://youtu.be/Ri6cci288vk
If link checker says its there, it was there when link checker looked for it.
Two common causes of not being able to see it when you check manually are:
Comments aren't visible - I find it happens with trackbacks when owners install plugins like disqus, but don't disable the trackback system properly. Remember link checker just checks the HTML of the page, so just because you can't see the link, doesn't mean it isn't there.
Recent comments - some blogs display recent comments in the sidebar. This means you may not have had a successful post on that page of the blog, but on another. When link checker checks the page it sees your link in the sidebar and reports it as successful.
Personally I've found link checker to be really accurate. Normally what I do when scraping new lists is post two different URLs and then check for the first URL, this pretty much removes the second problem of "recent comments".
I also have a filter I use to remove blogs using disqus, this isn't necessary if you're just making links for yourself, but trying to explain to buyers that the link is there, just isn't visible is more hassle than it's worth.
indianagent
Regular Member
- Dec 18, 2009
- 271
- 58
I hope someone can help me out. This is possibly the fifth time it happened. But I was harvesting some urls, eg 200k. The next day I see it was still working but my public proxies were dying out so I hit abort. As soon as I did that, the app crashed and I lost everything. Why is this happening? I thought this app was stable?
I have a high end pc with 64gb of ram, so I'm not sure what everytime i harvest, the app crashes.
I have a high end pc with 64gb of ram, so I'm not sure what everytime i harvest, the app crashes.
I'm not sure why it would have crashed, get in contact with support and they'd be able to examine the log files probably.
However, I just wanted to let you know that your harvested files are saved in the scrapebox folder and you should be able to recover them even after a crash in the harvester_sessions folder.
indianagent
Regular Member
- Dec 18, 2009
- 271
- 58
Thanks, I didnt know about the recovery files, thought i'd lost all of them. I just contacted support and will see what they can do. Thanks again.
indianagent
Regular Member
- Dec 18, 2009
- 271
- 58
Can someone explain something to me regarding scrapebox? My question is, if someone has a list of eg. 50K Autoapprove websites, can they be used on any niche? I thought the autoapprove links are only for the keywords that you chose..
- Nov 2, 2008
- 59,100
- 26,628
just a heads up - not sure if this is a problem with s/box or google
for 3 and a half yrs no exception i always got 2-2.5k proxies past
the Google check, no exception every day.
today i did my usual port scan, and what should have been 2 - 2.5k
Google passed, suddenly became 1k Google passed 1400 anonymous
usually it would lets say 2.5k g/passed = 2.5k anonymous.
anyone else notice this today. is there s problem with s/box
proxy tester ?
for 3 and a half yrs no exception i always got 2-2.5k proxies past
the Google check, no exception every day.
today i did my usual port scan, and what should have been 2 - 2.5k
Google passed, suddenly became 1k Google passed 1400 anonymous
usually it would lets say 2.5k g/passed = 2.5k anonymous.
anyone else notice this today. is there s problem with s/box
proxy tester ?
indianagent
Regular Member
- Dec 18, 2009
- 271
- 58
Another question I had, say I harvest 200k urls and I want to check for auto approve, do you guys use your main site for fastpost commenting just to check for auto approval urls?
I have an aged that where I'm trying to build tier 1 slowly but I don't want to post any spam for it. I just want a list of AA sites on the side to keep down the road. What do you guys normally do when commenting?
I have an aged that where I'm trying to build tier 1 slowly but I don't want to post any spam for it. I just want a list of AA sites on the side to keep down the road. What do you guys normally do when commenting?
alaltaierii
Supreme Member
- Jun 11, 2010
- 1,494
- 388
Don't use your main site when you build AA list. Just use a non registered domain.
- Status