Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
Hi, emailed captcha sniper and got it sorted.

I can't send PMs yet. If you can PM me your email address, I'll mail it to you.

PM sent

Here is the sample for securimage.

View attachment 13974

I will have a look and see how much success rate i get :)

andrey, please help me as well mate.!

please add me on skype and will help you get it sorted, i sent my skype details via pm

Now using past 3 motnhs and works great for amr.

thx for your nice comments :)
 
I was able to run on windows 7 but cannot run Windows server 2008.
After selecting use CSSE, It says "Port 80 is allocated to some other service. http server not started". I am using CS 7.77
 
Bought it with the link. How do you get the license with Plimus? Emailed what I think is the right data, no replies yet.
 
I PM'd Skype support about my issue but no reply yet despite their Skype is online.

I bought this a week ago but haven't used it (tried to) until now.

When I run normally, it says invalid license. When I run it as admin, it says that address is used. Weird.

EDIT: Got my reply. Maybe it's a timezone thing.
 
Last edited:
Add imbotz to skype as that is the support skype. He handled the problem very well via TeamViewer. The user's manual/guide is also useful.
 
I was able to run on windows 7 but cannot run Windows server 2008.
After selecting use CSSE, It says "Port 80 is allocated to some other service. http server not started". I am using CS 7.77

CSSE ? Seems Server is not effective yet


  1. .netframework 3.5 is missing or partly enabled

You need to install .netframework 3.5 even if you have higher version. If your OS is windows 7 then you can not install .net framework.WIndows 7 got built in .net framework 3.5 but partly enabled.

To make it available fully please do the following steps:

Go to control panel => Programs and features => find Turn windows features on or off to your left side.

You can find microsoft .net framework 3.5 partly activated there.
Click Microsoft .net framework 3.5.1 and Enable both windows communication foundation HTTP activation and windows communication foundation non HTTP activation. Apply the changes and save it.



  1. Antivirus or Antspyware is blocking CSSE.exe
Check your antivirus. Some Antivirus blocks CSSE. If you get this error please pause antivirus for sometime and then start server. After starting server you can start your antivirus again. if there is no antivirus then stop and start CSSE again.
Note:If you want to stop CSSE then please stop or pause antivirus first and then stop CSSE.

Case 8 ? CSSE ? Port 80 is not available for CSSE
You need to install .netframework 3.5 even if you have higher version. If your OS is windows 7 then you can not install .net framework.WIndows 7 got built in .net framework 3.5 but partly enabled.
To make it available fully please do the following steps:
Go to control panel => Programs and features => find Turn windows features on or off to your left side.
You can find microsoft .net framework 3.5 partly activated there. Click Microsoft .net framework 3.5.1 and Enable both windows communication foundation HTTP activation and windows communication foundation non HTTP activation. Apply the changes and save it.
Skype and Teamviewer are common programs which make use of port 80.You can make them use other ports. In order to rule out skype and teamviewer and to have them running smoothly not having to close and restart them each time you wish to use Captcha Sniper please do the following:
For Skype:
Go to Tools => connection optins => Uncheck the use port 80 and 443 as alternatives for incoming connections box and save it
For Teamviewer:
Go to Extras => Options => Advanced => Uncheck Don?t use incoming ports 80 and 443 and hit Ok

IIS is another program using port 80.If you dont use IIS then you can stop it.
To stop IIS go to start menu => control panel => system and security => Administrative tools => open Internet Information services => select websites => Default website => click the stop button on the tool bar.
One more common reason to make port 80 not available is your system uses port 80.
Goto run => type services.msc .
In services look for world wide web publishing service or web deployment agent services.
Double click it and make start type as Manual and below that stop the service and apply changes and restart. Now your port 80 will be free.


Bought it with the link. How do you get the license with Plimus? Emailed what I think is the right data, no replies yet.

If you bought it via Plimus, you would have to enter the plimus order number instead of the paypal transaction id at the registration prompt

I just restarted my computer and now I get Invalid License.

In this case you would have to delete the license and go through the reg process one more time. Make sure captchasniper.exe is set to run as admin and in win xp mode for all users before you go through the reg process
 
I keep running into a problem with Captcha Sniper freezing while I'm using it.

Basically, it stops displaying the captcha's that are being sent to it and it stops displaying the answers too. It does this in both the host file mode and the CSSE mode. Is it still working and something is just causing the captcha's to not show up? If I restart CS, they start showing up again but it eventually stops working again. Anyone else have this problem?
 
I keep running into a problem with Captcha Sniper freezing while I'm using it.

Basically, it stops displaying the captcha's that are being sent to it and it stops displaying the answers too. It does this in both the host file mode and the CSSE mode. Is it still working and something is just causing the captcha's to not show up? If I restart CS, they start showing up again but it eventually stops working again. Anyone else have this problem?

I have the exact problem. I think it freezes every hour or two. Not sure if it's still running but the program I'm using it with says it's redirecting to deathbycaptcha since CS failed (didn't indicate if the captcha was incorrect or CS cannot be detected though).

If this happens, I just rerun the CS but I'm going to guess that after a week or so, I'm guessing that I'm going to be annoyed.
 
I have the exact problem. I think it freezes every hour or two. Not sure if it's still running but the program I'm using it with says it's redirecting to deathbycaptcha since CS failed (didn't indicate if the captcha was incorrect or CS cannot be detected though).

If this happens, I just rerun the CS but I'm going to guess that after a week or so, I'm guessing that I'm going to be annoyed.

I sincerely hope the developers realizes/understands this overwhelming issue is a huge crusher.

Until you fix this,
this software is worthless because we have to babysit it.

Every two hours I am forced to restart this software, and it's frankly pissing me off that you have yet to fix this.
Until this is fixed, I do not recommend buying this software.

Fix it ASAP.
 
I want to try and solve this captcha using the destruction kit, but the software won't show .png files? View attachment 13973 Any ideas?
can u post the solution to this (using .png files) for everyone to see? i tried changing format of the files to .jpg but after adding them, they dont get recognized correctly?
 
Hello,

Any news about new CS update that can work with GSA without crashing ?
I'm using it with GSA SE ranker and it's crashing all time.
I have latest 7.77 version...
I use CSSE with 100 threads (and 100 threads in GSA)...I have try with 50 threads but the same problem happen all time.
First it crash very often or if it not crash it just stop loading capchas.

Second problem is that I need each time to select all capcha types one by one...
It's really pain to use this tool.

Can you make option to select all at once please ?
I already asked for this month ago and still didn't get reply.
YES I knot I shoulden't use all types as no software have all that capchas, but GSA SE ranker has, so I need to use all.

If you can't make it to be stable, you can make it that when it crash it restarts itself and to load with settings that was used last time (to select all capchas and starts CSSE).

Please help with this.
 
Hello,

Any news about new CS update that can work with GSA without crashing ?
I'm using it with GSA SE ranker and it's crashing all time.
I have latest 7.77 version...
I use CSSE with 100 threads (and 100 threads in GSA)...I have try with 50 threads but the same problem happen all time.
First it crash very often or if it not crash it just stop loading capchas.

Second problem is that I need each time to select all capcha types one by one...
It's really pain to use this tool.

Can you make option to select all at once please ?
I already asked for this month ago and still didn't get reply.
YES I knot I shoulden't use all types as no software have all that capchas, but GSA SE ranker has, so I need to use all.

If you can't make it to be stable, you can make it that when it crash it restarts itself and to load with settings that was used last time (to select all capchas and starts CSSE).

Please help with this.

Here is answer from GSA developer:

"you don't need CSSE at all as our program (GSA Search Engine Ranker) is only sending one captcha to CS at a time. So it is not a problem of threads. And it is not a problem of our software anyway but of CS that is crashing. I am sorry but you have to write your problems to the CS author"
 
I sincerely hope the developers realizes/understands this overwhelming issue is a huge crusher.

Until you fix this,
this software is worthless because we have to babysit it.

Every two hours I am forced to restart this software, and it's frankly pissing me off that you have yet to fix this.
Until this is fixed, I do not recommend buying this software.

Fix it ASAP.

Anyone who can reliably and consistently get this to happen, please skype me - imbotz. This has been such an isolated bug that we still are not able to reproduce it in a dev/testing enviroenment.
 
Anyone who can reliably and consistently get this to happen, please skype me - imbotz. This has been such an isolated bug that we still are not able to reproduce it in a dev/testing enviroenment.


Sorry, but this isn't an isolated bug. Go to the GSA SER thread within this sub forum, as nearly everyone there using CS with GSA SER has the same issue.
 
Status
Not open for further replies.
Back
Top