Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
Setting English for non-unicode programs will cause a lot of hassle in my situation, how to get around with it? Using applocale is inconvenient, why must CS use english for non-unicode to work properly?

It would be great if there could be an update that allows CS to remember last selected captcha types and start CSSE automatically.
 
I've been having a lot of trouble getting CS to work with anything, it's sporadic at best. Trouble with CSSE, direct integration of scrapejet. Working on and off with SENuke and some other direct integration programs. Support has been fairly quick but by and large they are repeating themselves. I think they're a bit swamped with support inquiries. Just my experience thus far, really looking forward to the update and recaptcha.

Please specify what are the exact issues you are facing, we where able to fix most of our customers issues with the exact steps which are metnioned in the guie. Of cours there are a few occassions where the problem is different. Please send me your skype id and we can work out any issue step by step.

I just bought it, waiting for my license.

I am going to be using it with scrapejet, scrapebox and sick submitter. Mainly for dolphin sites so I'm stoked to see it supports dolphin/boonex sites.

I am sure I'm going to run into some roadblocks and I'm going to need help so I will report back here with my success.

Thx for your purchase, we are happy to have you as a customer :)

Hi!
I bought CS because the last version 2.58 of Magic Submitter update said that support CS, really I was trying to setup it but it did not run, I have contacted the support of Magic Submitter and just I got a response contact to CS support, I believe it is not a problem of CS because I have tried Article Robot and it was running correctly. Really I am unhappy with Magic Submitter support because they are saying that the las version support 2.58 but it is not correct... If someone run CS and MS please help me :)

Thanks vey much!

With the latest version of MS we have direct integration. In case you need assistance with setting it up, please give me your skype id via PM and I will help you out

I haven't been able to get it up and running using the integration at all only with CSSE using bypasscaptcha. What settings are you using on both softwares?

I bought it specifically for this reason too and have had major trouble trying to get everything set up. I have contacted the MS developer as well, and he seems to think the issue is coming from CS but I too have gotten CS to work perfect with Scrapebox. It took about 2 days before I troubleshooted everything and found a semi-working solution.

You must have the 1.5 Beta with CSSE, use the emulator to emulate bypasscaptcha, fill in some values for your bypasscaptcha key in MS random numbers I suppose would work. Make sure host files redirect, and use CSSE are ticked. This will allow MS to work with CS, but the problem is if the captcha fails it won't get sent to a human decaptcher service and your success rate will plummet costing you twice as much time to complete the work as if you didn't use the software. So I'm sort of held up at the moment, hoping a new update with MS will fix this.

Normally these steps aren't required since the last version of MS has direct integration with Captcha Sniper. If used this way, this is the correct way to go:

If you wish to use a service as a secondary option and you wish to use CSSE, you will have to stop the server in CSSE, untick the required service at the http and api screen, save and start the server. This will remove the linces for the required service from the host file and you can use it. You would only need to tick it in MS as a secondary option.

Of course, if you would like for me to help you out, just shoot me a PM with your skype id an I will help you get it working right.

I tried manual and deathbycaptcha on MS checkout on Use CaptchaSniper, and of course port80 is running correctly. I contacted and talk with Olekandr Krulik dev of MS and really not big help, just told me contact to CS support, for me it is not running.... I do not understand why they said yes, MS supports CS....

It does work and it normaly is a problem on your end which can be fixed. Also end me your skype id via PM and I will help you get it working.

My antivirus tracks it as potential malware also when I downloaded it the instructions have a paypal transaction ID I don't have this when I bought this because I paid it by card now how am I supposed to run it if it is a virus?

Do they have a refund offer? I can't seem to get hold of any of their support...

It is fairly simple, you would just have to add an exception in your antivirus for captchasniper.exe and CSSE.exe and it will work normally. For refunds you would have to adress my collegue Mike as he is the only one taking these decissions.

You can shoot him an email at license[at]captchasniper[dot]com

How many computers can I install it on?

We allow 1 license/PC

Setting English for non-unicode programs will cause a lot of hassle in my situation, how to get around with it? Using applocale is inconvenient, why must CS use english for non-unicode to work properly?

It would be great if there could be an update that allows CS to remember last selected captcha types and start CSSE automatically.

Mike is working on a huge update which will rule out most of these errors. For now in order to rule out the runtime error 5 it has to run in english for non unicode. Can you please explain why applocale would be an issue?
 
Mike is working on a huge update which will rule out most of these errors. For now in order to rule out the runtime error 5 it has to run in english for non unicode. Can you please explain why applocale would be an issue?

There are so many software programs installed on my PC that only display correctly when not setting english for non unicode, specifying them one by one to use applocale is too time-consuming.

If a huge update takes a long period of time, for example, it's been months now since 1.5beta first rolled out, but non bug-fixed or functionality improvement update has been released, so it's properly a good idea to release small updates frequently and enable CS to automatically download updates and install by itself.
 
ive been trying to get ahold of support for the last couple of days...it sucks when you pay for something and you have to wait days for it to work properly..... i keep getting license invalid and have followed the steps in the guide. it has been working fine until i restarted my system....these guys need to step it up with their support.....updates and support are the main reason people put money down for software. a hundred bucks aint alot of money but its not pocket change either.
 
ive been trying to get ahold of support for the last couple of days...it sucks when you pay for something and you have to wait days for it to work properly..... i keep getting license invalid and have followed the steps in the guide. it has been working fine until i restarted my system....these guys need to step it up with their support.....updates and support are the main reason people put money down for software. a hundred bucks aint alot of money but its not pocket change either.

Actually, 90% of support emails are handled within minutes or hours of receiving them. Rarely does an support email go unanswered for more than 12-14 hours. (ones that are received while I am sleeping). If you are waiting 'a couple of days' then you might need to check your spam folder, because no emails are left unanswered for this long. Customer service and support is our # priority next to development and we pride ourselves in our level of service. There is no other small vendor that provides the level of service which we do ... so there wont be any 'stepping up' as its already as good as it can be.
 
Hi Guys,

Just wanted to quickly update you in case I will be slow on answering these next few days.

I have an urgent familly matter which needs my full attention and I wanted to apollagize if I was and will be slow on answering your requests these next few days. In the meantime, Mike will take care of all your needs and I would like to ask for your patience and understanding. The situation will be fixed in a matter of a few days and everything will return to normal.

thx guys
 
Out of all the bugs i encountered, this one seems to be the worst, why is this happening? (on 2 different systems), all the time.

2j4xaw5.jpg
 
Hi Andrey,

i see something very strange. I use V 1.5 Beta with CSS and "Profiler" (Ubot by crazyflx
Available at the download section.

Everything works find but Captcha Type 16 can not be solved but the submitted captcha
is exactly Type 16. This effects a lot of PPHPBB boards. I tried also use clean images algo.

If the same Type 16 Captcha is solved (without CSS - NoHandsSEO does not support?)
by NoHansdSeo it works fine. Not sure if it is Ubot or the targeted platform (Phpbb) which causes the problem.

Any suggestions or ideas what i can do?

And - Thanks a lot for you good support here in the board!
 
i submitted a license reset to support about 4 days ago...
 
I unchecked the "Use Hosts File Redirect" option and get the VB6 "Run-Time Error 53 File Not Found" error. What file do I need to make that error go away?
 
Hello,

I just bought captchasniper. Can't wait to get this running. I have submitted a request for license as instructed, can someone from CaptchaSniper.com PM to let me know when I can expect my license, I haven't received anything in my email yet.
 
Out of all the bugs i encountered, this one seems to be the worst, why is this happening? (on 2 different systems), all the time.

2j4xaw5.jpg

I actually never seen this bug before. Can you please send me your skype id via PM. I will halp you sort it out

Mine says port 80 is blocked, even though it is empty..

Start the task manager and close CSSE properly If you used CSSE. Most likely it didn't shut down properly so you would have to close it via task manager.

How do you enable CaptchaSniper in Senuke?

You would have to enter whatever user and pass you like under the decaptcher option in Senuke and hit test. The balance should say 7.77

Hi Andrey,

i see something very strange. I use V 1.5 Beta with CSS and "Profiler" (Ubot by crazyflx
Available at the download section.

Everything works find but Captcha Type 16 can not be solved but the submitted captcha
is exactly Type 16. This effects a lot of PPHPBB boards. I tried also use clean images algo.

If the same Type 16 Captcha is solved (without CSS - NoHandsSEO does not support?)
by NoHansdSeo it works fine. Not sure if it is Ubot or the targeted platform (Phpbb) which causes the problem.

Any suggestions or ideas what i can do?

And - Thanks a lot for you good support here in the board!

This is most likely an error caused by the bot if it runs fine with NHSEO. Send a PM to Crazyflx and notify him about it.

i submitted a license reset to support about 4 days ago...

I apollagize for the delays. In this case your email landed most likely in the junk folder. If you didn't receive your license by now, please send me the license code via PM together with your email adress and I will have it sent to you.

I unchecked the "Use Hosts File Redirect" option and get the VB6 "Run-Time Error 53 File Not Found" error. What file do I need to make that error go away?

This is normally an error caused if captchasniper.exe wasn't set to run in compatibility mode for xp and as admin for all users. Please verify this and if it isn't then you might have to make these changes and ask for a new license file.

If this is not the case, a simple uninstall and reinstall should fix it. But make sure when you uninstall, that you leave the license file in the Captcha Sniper folder.

Hello,

I just bought captchasniper. Can't wait to get this running. I have submitted a request for license as instructed, can someone from CaptchaSniper.com PM to let me know when I can expect my license, I haven't received anything in my email yet.

Thx for your purchase, you should have received your license by now. In case you didn't, please forward the code to me via PM here, together with your payment email adress and I will send it over to you.
 
andrei thanks for getting me license and responding so quickly. so i tested this out, it is installed properly and it works with scrape box !

now i have this problem, i cannot get catcha sniper to work with submiteaze don't know why, it seems to support decaptcher.com service, so i think it should work with captcha sniper. I actually bought captchasniper to use with SubmitEaze directory submitter. I PM you details. please let me know if this problem can be solved, i am sure it can be. If you can solve this for me that would be really appreciated. Also there were posts 6 months ago by ppl who said they got it to work with submit ease. thanks.

Also found this post by mike on warrior forum, http://www.warriorforum.com/warrior...captcha-solving-software-special-offer-3.html

he says 1.5 should work with submiteaze. unfortunately i installed captch sniper 1.4 because it was marked stable release. please pm or respond on how to fix. thanks
 
Last edited:
Does this work on senuke x? If not, what are the good alternatives that works good on senuke x?
 
Status
Not open for further replies.
Back
Top