Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
I can't seem to get SB to work on a VPS. I loaded 50+ private proxies using the correct format for proxies with username and password. I then loaded an AA list (25k). What do you know? 0 success rate.

But if I use the proxies on the scrapebox on my laptop, it's working perfectly fine. Any ideas why this is happening?

If you look at the errors after posting what are the error codes next to them? They are listed in the white box there, or you can go to export >> export error log. Paste a sample here inside the code tags. That would shed some light as to why the fast poster is failing. Also if you are using the old proxy harvester what error code does it give?
 
If you look at the errors after posting what are the error codes next to them? They are listed in the white box there, or you can go to export >> export error log. Paste a sample here inside the code tags. That would shed some light as to why the fast poster is failing. Also if you are using the old proxy harvester what error code does it give?

Thank you. Now, I can't even post on SB using fast or slow poster. Again, I'm using Private Proxies with username and password. It's always 0 success.

However, I do get some minor success when using trackbacks. I'm not sure why this is the case.

What are the settings that I should check? I've set the settings to settings for slow internet connections (even if I'm using the VPS) and the same thing is still happening.

I just ran a list and got 2 successful posts out of 5339 links. I got these errors:

FAILED, timeout
FAILED, 403

When checking the private proxies, I got these errors:

Error (IP Blocked)
Error Timeout

I'm using these proxies in NHSEO and they're working fine. I appreciate any info that you can give me.
 
Thank you. Now, I can't even post on SB using fast or slow poster. Again, I'm using Private Proxies with username and password. It's always 0 success.

However, I do get some minor success when using trackbacks. I'm not sure why this is the case.

What are the settings that I should check? I've set the settings to settings for slow internet connections (even if I'm using the VPS) and the same thing is still happening.

I just ran a list and got 2 successful posts out of 5339 links. I got these errors:

FAILED, timeout
FAILED, 403

When checking the private proxies, I got these errors:

Error (IP Blocked)
Error Timeout

I'm using these proxies in NHSEO and they're working fine. I appreciate any info that you can give me.

Well firstly talking about your posting errors:

Failed, timeout means it timed out. So you have a timeout set in your timeout settings, under the settings menu. Say its 40 seconds for instance. When scrapebox tries to post, it will try to load the page and post, if it can't do it in 40 seconds then it aborts the connection.

Generally this is either going to be caused by a bad proxy or running too many connections with too low of timeouts on your internet connection. As you only have so much speed and the DNS is so fast, so when its capped you get timeout errors. On a VPS this "should" be pretty decent at least if not great in the way of internet connection and DNS, but it still could happen. What speed is the connection and are you using the hosts DNS and what are you connections and timeouts set at?

Tieing this in with the fact that you get timeouts when using the proxy checker means that your proxies aren't responding in the given timeout. So this could be that you are exceeding your proxy providers simultaneous connections limit. What is your providers simltaneous connections limit? If you don't know you should hghghg vxc out as you can't optimize your setup without this info. I have seen providers here offering private proxies with as low as 10 connections per account, which would lead your other connections to either give 403 or timeout errors.

Which leads to the 403 errors. Its either that the proxy is denying your request or that the end page is denying your request as forbidden. So this can happen with sites, they can deny your request, but this should be, on average, less then 1% of your errors. So if you are seeing this a lot then its the private proxies denying your request.

The ip blocked you are getting when proxy checking is from google, the IP is banned. The timeout means that google or the scrapebox ip test server failed to respond in the timeout - which is basically impossible, I mean its excessively unrealistic and in 2 years of using scrapebox almost daily I have never seen it happen. OR your proxies are timing out. Again this could be due to bad proxies or too many connections. You have to take into account your nhseo connections as part of total connections if its running when your running sbox.

Try doing this. go to settings >> connections - and set to 5 connecitons
settings >> timeouts - and set to 90 seconds
options >> use new proxy harvester - and check this off.

Then try testing proxies and check off the ignore google box and test your proxies. What are the results? It will only do an IP test. So if you see timeouts or 403 thats is 100% your proxies giving those.

Then try and test post, what do you get as results?

I know you say your proxies are working fine in nhseo, but since you can't manually do a proxy test in nhseo do you really know they are working fine? I mean nhseo is going to try a proxy and if it fails its going to move onto another proxy. so if 10% of your proxies are working then they will run in nhseo and it will seem good, cause its only using the working ones.

Where as with scrapebox you can do a specific proxy proxy test and see results. I have no reason or proof ever to believe that the proxy checker is not accruate as it works off of paid test servers and google which is just a good if not better. However if you wanted an 3rd party opinon you could test them in something like charon.
 
Just made payment waiting for respond from sweetfunny this is: [FONT=&quot]PayPal transaction number[/FONT][FONT=&quot]4YP91811PG9597015[/FONT]
[FONT=&quot][/FONT]nickson,
[FONT=&quot][/FONT]
[FONT=&quot]thanks
[/FONT]
 
Just made payment waiting for respond from sweetfunny this is: [FONT=&quot]PayPal transaction number[/FONT][FONT=&quot]xxxxx[/FONT]

Edit out your transaction ID from your post. Could get your data jacked.
 
Regarding the YSE situation, Google has to be aware of all those pages with the backlinks we are searching for.

Is there a search operator to scrape pages with outbound links that match a certain pattern?

For example, if I am promoting a Clickbank product, and my hoplink points to:

Code:
http://www.clickbankvendor.com/?hop=[I]myaffiliateid[/I]

If I want to find my competition's backlinks, could I use a footprint to find pages with outward links containing the string:

Code:
http://www.clickbankvendor.com/?hop=
 
Last edited:
Well firstly talking about your posting errors:

Failed, timeout means it timed out. So you have a timeout set in your timeout settings, under the settings menu. Say its 40 seconds for instance. When scrapebox tries to post, it will try to load the page and post, if it can't do it in 40 seconds then it aborts the connection.

Generally this is either going to be caused by a bad proxy or running too many connections with too low of timeouts on your internet connection. As you only have so much speed and the DNS is so fast, so when its capped you get timeout errors. On a VPS this "should" be pretty decent at least if not great in the way of internet connection and DNS, but it still could happen. What speed is the connection and are you using the hosts DNS and what are you connections and timeouts set at?

Tieing this in with the fact that you get timeouts when using the proxy checker means that your proxies aren't responding in the given timeout. So this could be that you are exceeding your proxy providers simultaneous connections limit. What is your providers simltaneous connections limit? If you don't know you should hghghg vxc out as you can't optimize your setup without this info. I have seen providers here offering private proxies with as low as 10 connections per account, which would lead your other connections to either give 403 or timeout errors.

Which leads to the 403 errors. Its either that the proxy is denying your request or that the end page is denying your request as forbidden. So this can happen with sites, they can deny your request, but this should be, on average, less then 1% of your errors. So if you are seeing this a lot then its the private proxies denying your request.

The ip blocked you are getting when proxy checking is from google, the IP is banned. The timeout means that google or the scrapebox ip test server failed to respond in the timeout - which is basically impossible, I mean its excessively unrealistic and in 2 years of using scrapebox almost daily I have never seen it happen. OR your proxies are timing out. Again this could be due to bad proxies or too many connections. You have to take into account your nhseo connections as part of total connections if its running when your running sbox.

Try doing this. go to settings >> connections - and set to 5 connecitons
settings >> timeouts - and set to 90 seconds
options >> use new proxy harvester - and check this off.

Then try testing proxies and check off the ignore google box and test your proxies. What are the results? It will only do an IP test. So if you see timeouts or 403 thats is 100% your proxies giving those.

Then try and test post, what do you get as results?

I know you say your proxies are working fine in nhseo, but since you can't manually do a proxy test in nhseo do you really know they are working fine? I mean nhseo is going to try a proxy and if it fails its going to move onto another proxy. so if 10% of your proxies are working then they will run in nhseo and it will seem good, cause its only using the working ones.

Where as with scrapebox you can do a specific proxy proxy test and see results. I have no reason or proof ever to believe that the proxy checker is not accruate as it works off of paid test servers and google which is just a good if not better. However if you wanted an 3rd party opinon you could test them in something like charon.

Thanks. I think this did it. Although I'm still getting low success. I think I got 900+ successful posts from a 13k AA list.

I'm trying another list to see if it will improve.
 
please add shortcut key
for example : Ctrl+p (for start posting)
ctrl+a for abort posting
and etc​
 
Well firstly talking about your posting errors:

Failed, timeout means it timed out. So you have a timeout set in your timeout settings, under the settings menu. Say its 40 seconds for instance. When scrapebox tries to post, it will try to load the page and post, if it can't do it in 40 seconds then it aborts the connection.

Generally this is either going to be caused by a bad proxy or running too many connections with too low of timeouts on your internet connection. As you only have so much speed and the DNS is so fast, so when its capped you get timeout errors. On a VPS this "should" be pretty decent at least if not great in the way of internet connection and DNS, but it still could happen. What speed is the connection and are you using the hosts DNS and what are you connections and timeouts set at?

Tieing this in with the fact that you get timeouts when using the proxy checker means that your proxies aren't responding in the given timeout. So this could be that you are exceeding your proxy providers simultaneous connections limit. What is your providers simltaneous connections limit? If you don't know you should hghghg vxc out as you can't optimize your setup without this info. I have seen providers here offering private proxies with as low as 10 connections per account, which would lead your other connections to either give 403 or timeout errors.

Which leads to the 403 errors. Its either that the proxy is denying your request or that the end page is denying your request as forbidden. So this can happen with sites, they can deny your request, but this should be, on average, less then 1% of your errors. So if you are seeing this a lot then its the private proxies denying your request.

The ip blocked you are getting when proxy checking is from google, the IP is banned. The timeout means that google or the scrapebox ip test server failed to respond in the timeout - which is basically impossible, I mean its excessively unrealistic and in 2 years of using scrapebox almost daily I have never seen it happen. OR your proxies are timing out. Again this could be due to bad proxies or too many connections. You have to take into account your nhseo connections as part of total connections if its running when your running sbox.

Try doing this. go to settings >> connections - and set to 5 connecitons
settings >> timeouts - and set to 90 seconds
options >> use new proxy harvester - and check this off.

Then try testing proxies and check off the ignore google box and test your proxies. What are the results? It will only do an IP test. So if you see timeouts or 403 thats is 100% your proxies giving those.

Then try and test post, what do you get as results?

I know you say your proxies are working fine in nhseo, but since you can't manually do a proxy test in nhseo do you really know they are working fine? I mean nhseo is going to try a proxy and if it fails its going to move onto another proxy. so if 10% of your proxies are working then they will run in nhseo and it will seem good, cause its only using the working ones.

Where as with scrapebox you can do a specific proxy proxy test and see results. I have no reason or proof ever to believe that the proxy checker is not accruate as it works off of paid test servers and google which is just a good if not better. However if you wanted an 3rd party opinon you could test them in something like charon.

Thanks. Very informative.
 
Regarding the YSE situation, Google has to be aware of all those pages with the backlinks we are searching for.

Is there a search operator to scrape pages with outbound links that match a certain pattern?

For example, if I am promoting a Clickbank product, and my hoplink points to:

Code:
http://www.clickbankvendor.com/?hop=[I]myaffiliateid[/I]
If I want to find my competition's backlinks, could I use a footprint to find pages with outward links containing the string:

Code:
http://www.clickbankvendor.com/?hop=

You would need to pull something like

site:http://www.clickbankvendor.com/?hop= a
site:http://www.clickbankvendor.com/?hop= b
site:http://www.clickbankvendor.com/?hop= c
site:http://www.clickbankvendor.com/?hop= car
site:http://www.clickbankvendor.com/?hop= house
site:http://www.clickbankvendor.com/?hop= 1
site:http://www.clickbankvendor.com/?hop= 2

or use inurl: instead, but I have round site: seems to work better for this. Notice the space between the url and the letter/number/word

Then after you have your results use link: to pull the backlinks

link:http://www.clickbankvendor.com/?hop=competitorAFFid



Thanks. Very informative.

Your welcome, glad it was of a help.
 
How can I upload multiple links and keywords on SB for fast poster? So in essence:

URL 1 for keyword 1
URL 2 for keyword 2
URL 3 for keyword 3

I want to blast my BMR links so obviously, there will be different links. Each article has a different keyword so I want to blast that specific link with the specific keyword.
 
How can I upload multiple links and keywords on SB for fast poster? So in essence:

URL 1 for keyword 1
URL 2 for keyword 2
URL 3 for keyword 3

I want to blast my BMR links so obviously, there will be different links. Each article has a different keyword so I want to blast that specific link with the specific keyword.

In Websites.txt, place this:
URL 1 keyword 1
URL 2 keyword 2
URL 3 keyword 3

This is called link locking. You can use spintax in the keywords as well.
 
Hey!
I was trying to use the ping mode but it doesn't work for me for some reason :S
I have loaded working proxies, loaded more than 10 referrer sites and loaded my youtube video/ezine article.
But when I watch it again after a few minutes there is no increase at all..

thanks!
 
Status
Not open for further replies.
Back
Top