Permanently Closed Marketplace Sales Thread

[sciborg]

I just used the built in tool to collect proxies from all known locations. This resulted in only about 31 working proxies.

I then scraped a list of about 110 awstats type urls to ping. It burned through the entire list of proxies with only one successful ping. It then gave me the 'out of proxies' issue.

So I'm guessing that getting my own list of proxies is the way to go.

Question...would the success rate be higher with some good paid proxies? 100 proxies will cost a few bucks...but is that enough proxies to get a job completed?

You absolutely will get a VERY HIGH success rate with paid proxies. For ping mode it's not as important IMO. But for commenting I have great success with Elite proxies.

I hear alot of people complain about the proxy feature on SB. But you must remember,that SB was made for scraping and commenting.NOT finding proxies.The proxy finder was intended as an added bonus....The owner was just trying to help us even more. But we need to always remember to leave him alone about the proxies and let him concentrate on the other MAIN features of the software,and we will all benefit even greater

" If you own a gun,you have to buy bullets to shoot it...."

Buy some proxies and I promise you WILL see your success rate go sky high

At least I have in my experience....

Good luck guys and Let's Make Some Money !!!

 

[intence]

when pinging another site, im getting 'failed - 403' error

whats that mean

 

[astonewood]

I have it and love it too!

 

[slackgen99]

Is there anything wrong with .52 version. I tried the new names and websites with this structure :

link {anchor 1|anchor 2|anchor3}
link {anchor 1|anchor 2|anchor3}
link {anchor 1|anchor 2|anchor3}
link {anchor 1|anchor 2|anchor3}

ANd placed an anchor to names. But when i post comments or test comments, it randomly selects url and anchor. Link lock does not work. What is wrong with it?

 

[prouser01]

Please comment on my post which is below and let me know what do you think about that. Thank you

From the result I see is only 40 good proxies can be used out of 398? Is that all, because hrefer has over 2000 list of proxies to search for in a given time, and get an average of over 380 good proxies. So, how can scraperbox handle not getting banned from search engines for a good proxy list under 100? So what I want to know is, how long does it take scraperbox to go through the proxy list or it depends on the circumstances?

 

[jacobb]

Please comment on my post which is below and let me know what do you think about that. Thank you

I have a lot more luck and going and finding a daily proxy list from other websites and the use them,.

 

[kez1000]

I've played with a few different ways to do this. I'm curious if the increase in views is getting you on the most viewed list at ezine? They have gotten wise to some other methods it seems. I have articles with lots of views but they never saw that 'list'.

Are you just simply doing ping mode to your articles? Would love to know how you are doing this....pm me if you like...

Thanks

there are two reasons why you are not showing up

one is that your articles have to be 400 words or more mine are over 450 to be on the safe side.

two you have to ping slow (10sec) as eza do not count a veiw unless its over 10sec

 

[portalweb]

there are two reasons why you are not showing up

one is that your articles have to be 400 words or more mine are over 450 to be on the safe side.

two you have to ping slow (10sec) as eza do not count a veiw unless its over 10sec

It means we need to configure the ping time for specific sites. The question is - how do we know which site is suitable for slow ping, and others - fast ping, when dealing with thousands of sites?

 

[rickstar]

I comment large lists (40,000+) without the use of a proxy and it works relatively well, success rate is about 50%. I wouldn't be surprised if my IP has been slightly blocked by Akismet but my comments are as genuine and generic as possible. You shouldn't scrape without using a proxy as Google will temporarily ban your network and that's always annoying.

Great work SF on everything so far, it does seem like you've caused a bit of an uproar.

There is only thing that I would LOVE to have at the moment, if this gets implemented I can die a happy man.

Basically, let there be a completely automatic mode (for the most part).

You load up all your .txt files, select your keywords to harvest. Click harvest, after which it will automatically harvest all URL's, remove duplicate pages and start commenting. After commenting is finished, enable it to automatically create a comment report and save it into a default location and then go out once again and harvest more keywords either similar variations or whatever else and then repeat the commenting process. If this could be done automatically, in the background for each project, it would be incredible!

Thanks again,
Eric

 

[insider]

Hey SweetFunny, I have a feature request.

Would it be possible to implement an option in the "remove duplicate menu" ?
This option could be named "Remove duplicate domains, but keep N first results"

So, when you click on this, it asks for an integer, say you type 5, it will remove the duplicates domains, keeping the 5 first URLs of each domains.

Let me know if it's not clear.

Thanks for your hard work

 

[mightyirons]

Redrabbit, that would be awesome, would save hours of waiting and watching... please please please Sweetfunny....

 

[bfmglobal]

there are two reasons why you are not showing up

one is that your articles have to be 400 words or more mine are over 450 to be on the safe side.

two you have to ping slow (10sec) as eza do not count a veiw unless its over 10sec

How do you ping slow with SB?

 

[intence]

set a delay

 

[bfmglobal]

set a delay

Dooh! Thanks...The button was right there in front of me the whole time...must have been in cloak mode before!

Okay...So I am doing ping mode to some articles. I have ran 100 successful pings but am not seeing any additional views to the article itself. I guess I'm pretty slow...but I must be missing something here????

Also, I turned off Proxies for pinging. Should be okay unless I ping the same sites over and over again correct????

Thanks!

 

[kobalt2]

I have a question - If I setup fast poster maxium connection e.g 20, but I have 40 private proxies than ScrapeBox will use only first 20 proxies during posting or all 40?

 

[Sweetfunny]

v1.9.54
Added: New Optional Proxy Scan between Fast and Slow Posting.
Added 2 New Proxy Sources (3,000 Proxies Total).
Added: Check PageRank of Root Domain without pruning URL's.
Also several other enhancements.

Anyone having problems, feel free to submit a support ticket. Also thanks for the suggestions and yes i'm making a note of them for future versions.

kobalt2 the proxies are randomly selected from the entire list, just like all the other randomly selected comment data.

 

[s4nt0s]

v1.9.54
Added: New Optional Proxy Scan between Fast and Slow Posting.
Added 2 New Proxy Sources (3,000 Proxies Total).
Added: Check PageRank of Root Domain without pruning URL's.
Also several other enhancements.

Anyone having problems, feel free to submit a support ticket. Also thanks for the suggestions and yes i'm making a note of them for future versions.

kobalt2 the proxies are randomly selected from the entire list, just like all the other randomly selected comment data.

Hey awesome updates! Check your logs for crashes. I had a few crashes while making some videos for the community. It was sent from my gmail.com address.

I'm not sure why the crash is happening but it's not all the time, just happens randomly.

this was for version 1.9.53 not .54 so maybe it won't happen.

Thanks again for the updates and awesome support.

P.S. Have you ever thought about having something for affiliates? I wouldn't mind promoting this awesome software. =) Just a thought ...

 

[kez1000]

I need some more random comments to use, can everyone share some of theres? That would be a great update if we can put together some defult comments I will start Thanks. Some great infomation here keep up the good work . I cannot really leave a more constructive comment as i'm abit out of my depth but i will be checking back here for further updates. if we had 100's of these sort of comments that would save time. you need nutral comment so your comment gets approved by wordpress blog admin

 

[kez1000]

delete

 

[slackgen99]

Is there anything wrong with .52 version. I tried the new names and websites with this structure :

link {anchor 1|anchor 2|anchor3}
link {anchor 1|anchor 2|anchor3}
link {anchor 1|anchor 2|anchor3}
link {anchor 1|anchor 2|anchor3}

ANd placed an anchor to names. But when i post comments or test comments, it randomly selects url and anchor. Link lock does not work. What is wrong with it?

ANyone is facing with this issue? Sweetfunny can you please help me with this problem. I can not make it working. I double checked everything but same issue.