Permanently Closed Marketplace Sales Thread

[qlithe]

There is a spinner, but its only for words, not articles/sentences but I will pass it on.

But the article poster, the single one lets you insert links.

Ok, but it's no different from adding the link in notepad?

One final question. When posting through the batch poster, it's all in html right?

 

[loopline]

Ok, but it's no different from adding the link in notepad?

One final question. When posting through the batch poster, it's all in html right?

I mean when you do it in the poster it takes care of formatting, if you add it in notepad, you would still need to add the html.

The batch poster will submit whatever you have, its up to how you have your wordpress setup as to how it gets formatted. Generally html works fine, but you can test it on your setup.

 

[qlithe]

I mean when you do it in the poster it takes care of formatting, if you add it in notepad, you would still need to add the html.

The batch poster will submit whatever you have, its up to how you have your wordpress setup as to how it gets formatted. Generally html works fine, but you can test it on your setup.

Ok!

The thing is, the main purpose of scraping articles would be to get content for lower tiers. And not being able to insert links into them or mix them together, kinda forces you to use other paid tools like articleforge etc, which makes the plugin kinda useless since those other tools usually have a scraper as well.

Would love if you could pass along the requests to the devs.

Thanks for taking the time.

 

[Iconoclast]

There is a spinner, but its only for words, not articles/sentences but I will pass it on.

But the article poster, the single one lets you insert links.

hi

i want to by sb for finding do follow atleast 10 to 15 da pa blogs to comment on. No niche specifications but blogs should be in english with low obl. Is this possible to find them in 2019 since lots of pltfors are nofollowed?

 

[Mr.An]

Is there any discount / promotion for buying the Plugin Bundle of 7 Plugins?
If yes, I am going to get them, please advise, thanks. @loopline @Sweetfunny

 

[loopline]

Ok!

The thing is, the main purpose of scraping articles would be to get content for lower tiers. And not being able to insert links into them or mix them together, kinda forces you to use other paid tools like articleforge etc, which makes the plugin kinda useless since those other tools usually have a scraper as well.

Would love if you could pass along the requests to the devs.

Thanks for taking the time.

So what is the request about links exactly?

You want to be able to randomly insert links in an article in batch poster or what exactly?

hi

i want to by sb for finding do follow atleast 10 to 15 da pa blogs to comment on. No niche specifications but blogs should be in english with low obl. Is this possible to find them in 2019 since lots of pltfors are nofollowed?

I mean what your asking for is going to be rare to be sure. Also if its low obl then its assumed to be moderated so I would not use scrapebox to comment on these blogs, I would manually comment and make a relevant comment.

As for finding ******** on a moderated blog, scrapebox can't really do that. Scrapebox needs to know a link that is already in the comments to tell you if it will be ******** or not. With auto approved thats easy, just make a fake comment with a fake link and then check and make your real links only on the sites you want, but low obl plus auto approved really is like looking for a needle in a hay stack, as it were.

Is there any discount / promotion for buying the Plugin Bundle of 7 Plugins?
If yes, I am going to get them, please advise, thanks. @loopline @Sweetfunny

Yes, the 7 plugin bundle is discounted to only $152

If you bought them all separate it would be $238

So the bundle discount saves you $86

more here
http://www.scrapebox.com/plugins

 

[qlithe]

So what is the request about links exactly?

You want to be able to randomly insert links in an article in batch poster or what exactly?

Yeah or doesnt have to be in the batch poster. A way to prepare articles for posting. Feels like the plugin only goes half-way atm.

Also another question:

Cant seem to get the domain checker to work with .se domains. Ive tried changing the server to whois.iis.se as well but even if theyre available they end up as "taken"

 

[Byzance]

Hi can i have a couple question?

What's your plugin does?
does your scrapebox already can do all what this plugin does? cause im really wanna try your tool, but when i see there are other plugin. Im a little bit aware. Do i miss something here? or can you direct me to some article that talk about what your scrapebox does and plugin does?

PS Forgive my bad english

 

[Iconoclast]

So what is the request about links exactly?

You want to be able to randomly insert links in an article in batch poster or what exactly?



I mean what your asking for is going to be rare to be sure. Also if its low obl then its assumed to be moderated so I would not use scrapebox to comment on these blogs, I would manually comment and make a relevant comment.

As for finding ******** on a moderated blog, scrapebox can't really do that. Scrapebox needs to know a link that is already in the comments to tell you if it will be ******** or not. With auto approved thats easy, just make a fake comment with a fake link and then check and make your real links only on the sites you want, but low obl plus auto approved really is like looking for a needle in a hay stack, as it were.





Yes, the 7 plugin bundle is discounted to only $152

If you bought them all separate it would be $238

So the bundle discount saves you $86

more here
http://www.scrapebox.com/plugins

Hi, thanks for reply.

I was asking about manual do follow blog comments. Eg I go to a website, post a relevant comment with a link to my website. And the site has atleast pa da of 10, with low obl

Thanks

 

[JimHalpert]

Was watching a loopline tutorial on scraping IPs (

) and was wondering what is the difference between Use Custom Harvester and Use Detailed Harvester?

Seems like Use Custom Harvester does not allow a delay. But Detailed Harvester allows a delay. What other differences are there?

Thanks.

 

[balaji986]

Do you have any sample to show. Interested in ordering, but need to check the links i am getting before i order. Thanks.

 

[loopline]

Yeah or doesnt have to be in the batch poster. A way to prepare articles for posting. Feels like the plugin only goes half-way atm.

Also another question:

Cant seem to get the domain checker to work with .se domains. Ive tried changing the server to whois.iis.se as well but even if theyre available they end up as "taken"

Ill pass it on.

.se seems to work for me as far as whois, with the server you noted.

Your using the expired domain finder plugin or the check available domains or something else?

Hi can i have a couple question?

What's your plugin does?
does your scrapebox already can do all what this plugin does? cause im really wanna try your tool, but when i see there are other plugin. Im a little bit aware. Do i miss something here? or can you direct me to some article that talk about what your scrapebox does and plugin does?

PS Forgive my bad english

You can read about the hundreds of functions of the core of scrapebox here
http://www.scrapebox.com/

and then you can read about the 7 different premium plugins here
http://www.scrapebox.com/plugins

Rather then release the premium plugins as stand alone software, scrapebox went the route of just making them less expensive and letting them plugin to the main scrapebox software. You may or may not need 1 or all the plugins depending on what it is that you want to do.

If you have specific questions, please post here so someone can try and help you.

Hi, thanks for reply.

I was asking about manual do follow blog comments. Eg I go to a website, post a relevant comment with a link to my website. And the site has atleast pa da of 10, with low obl

Thanks

Well yo uwould be able to get low obl manual comments that meet those metrics, with the exception of ********. Meaning you could use scrapebox to get the targets from the search engines and then use the metrics plugin or page authority addon to qualify the PA/DA etc.. and then use the obl checker addon for OBL

But you would not be able to qualify if its ******** or no follow. But you could easily do this with a browser plugin/extension and since you were going to manually comment anyway, just look for an existing comment to see if its d0foll0w or nofollow. Else if there are no comments, then you would just have to comment and find out.

Was watching a loopline tutorial on scraping IPs (

) and was wondering what is the difference between Use Custom Harvester and Use Detailed Harvester?

Seems like Use Custom Harvester does not allow a delay. But Detailed Harvester allows a delay. What other differences are there?

Thanks.

Thats about the whole of it. Custom harvester supports all engines and many threads, up to 2500 in fact. Detailed harvester supports max 4 engines and 1 thread at a time plus a delay.

They were added at sperate times is why they are seperate. In mac, which is newer, they are just combined into 1. But they both will get you the same end results from the engines.

Do you have any sample to show. Interested in ordering, but need to check the links i am getting before i order. Thanks.

I think you may be confused, this is not a link building service, its an Internet Marketing software. You can read loads here
http://www.scrapebox.com/

and then over 100 videos here
https://www.youtube.com/user/looplinescrapebox/videos

 

[JimHalpert]

If I previously bought the automator and now want to buy the bundle of 7 premium plugins (which includes automator), is there a discount?

 

[Iconoclast]

Ill pass it on.

.se seems to work for me as far as whois, with the server you noted.

Your using the expired domain finder plugin or the check available domains or something else?



You can read about the hundreds of functions of the core of scrapebox here
http://www.scrapebox.com/

and then you can read about the 7 different premium plugins here
http://www.scrapebox.com/plugins

Rather then release the premium plugins as stand alone software, scrapebox went the route of just making them less expensive and letting them plugin to the main scrapebox software. You may or may not need 1 or all the plugins depending on what it is that you want to do.

If you have specific questions, please post here so someone can try and help you.



Well yo uwould be able to get low obl manual comments that meet those metrics, with the exception of ********. Meaning you could use scrapebox to get the targets from the search engines and then use the metrics plugin or page authority addon to qualify the PA/DA etc.. and then use the obl checker addon for OBL

But you would not be able to qualify if its ******** or no follow. But you could easily do this with a browser plugin/extension and since you were going to manually comment anyway, just look for an existing comment to see if its d0foll0w or nofollow. Else if there are no comments, then you would just have to comment and find out.



Thats about the whole of it. Custom harvester supports all engines and many threads, up to 2500 in fact. Detailed harvester supports max 4 engines and 1 thread at a time plus a delay.

They were added at sperate times is why they are seperate. In mac, which is newer, they are just combined into 1. But they both will get you the same end results from the engines.



I think you may be confused, this is not a link building service, its an Internet Marketing software. You can read loads here
http://www.scrapebox.com/

and then over 100 videos here
https://www.youtube.com/user/looplinescrapebox/videos[/QUOTE

Is there any software that checks bulk ******** or nofollow check?
i can use dodetailer for the metrics ie pa da.


Thanks

 

[Iconoclast]

Further, i searched and scrapebox has a ******** test tool.

 

[JimHalpert]

Hey @loopline , I was watching your vid on using the Automator to scrape proxies. Would you mind helping me out with the following?

1) I had this Select Proxy Judge thing pop-up. It asked me to select a number between 1 to 4. What should I do here and how do I get Automator to help me do this in the future?
2) It seems like while this automator job is running to scrape proxies, I can't carry out other activities in Scrapebox eg. running Google Competition Checker. Do I have to run a separate instance of Scrapebox and then pull the proxies from the first instance of Scrapebox (which is scraping proxies)?

Thank you.

 

[underthegun]

Wow... I had no idea this tool was still active. I bought one maybe 8-10 years ago? It was still a brand new tool then. Really exciting to see you've added plugins. I'll be reinstalling and purchasing very soon. Got any discount codes available?

Also is the forum version still a thing? I had a license for it, as well.

 

[JimHalpert]

@loopline sorry one more question. Why doesn't the Scrapebox Google Competition Finder have the option to allow me to get fresh proxies from a saved text file (eg. Detailed Harvester has this option with the Select Auto Load Proxy File option). The idea here is to have a constantly update file of fresh proxies which allows Scrapebox Google Competition Finder to do its thing.

Thanks.

 

[Linking News]

Hi @loopline does the additional scrapebox plugin provides better reporting when extracted? The grab email just grab emails randomly. So I wanna know if the extra email scraper plugin provides columns like website then email.

Do you also give discount for extra plugin?

Thanks!

 

[loopline]

Yeah or doesnt have to be in the batch poster. A way to prepare articles for posting. Feels like the plugin only goes half-way atm.

Also another question:

Cant seem to get the domain checker to work with .se domains. Ive tried changing the server to whois.iis.se as well but even if theyre available they end up as "taken"

How would you even want this to work on the inserting links?

Like where would the urls for the links come from? like a file or ?

What keywords get matched up with the links for anchors? and how many?

For example an article about seo that has the keyword in it 50 times you don't want to be linking to the same url 50 times.

In the article poster, if the text is pasted in to there you can just highlight a keyword and click the link button and paste in a URL and it converts it to a link which is pretty quick and simple.

So how would you specificially want all the elements to work?