Permanently Closed Marketplace Sales Thread

[blinggam]

OMG please tell me this Link Extractor update fixes the "CPU leak" problem @Sweetfunny. I'm testing it now, the CPU usage does seem to be fluctuating a lot more, in a good way. I.e., the it seems to not be getting caught in the "CPU leak" as fast. It's properly closing out the threads and resetting to 0-3% CPU for a second, then moving back up.

I will know in approximately 1-2 hours as I now have 3 pretty insane servers running many instances of Link Extractor 24/7. Usually it takes at least 30-45 minutes of running for the "CPU leak" to start happening. But already I am without a doubt noticing a difference. My 8c/16t Xeon PC would be at 60% load already with 4x SB's running, it's now fluctuating between 5-20%... Not sure if it's fixed yet but this is looking REALLY PROMISING! Will update in a bit.

 

[blinggam]

Well sadly, the "CPU leak" (Win10) and "CPU lock" (Win7) still exist.

Let's take my i9-7940x server for example:

I am running on 100 threads per instance, 8 instances with 25 timeout.

• First 10 minutes - 0-5% CPU per instance, constantly fluctuating as it should depending on the URL(s) it's analyzing.
• 10-20 minutes - Still fluctuating, but starting to "lock in" at a particular CPU usage amount.
• 20-30 minutes - A few instances are "locked in" already at their "scaling core count CPU usage %". Meaning, SB Link Extractor directly scales with the amount of cores/threads available. Once the "lock" occurs, the amount of cores/threads determines the CPU usage % you'll be locked it in at per instance.
• 30-40 minutes - We're now fully "locked in" to the CPU leak/lock. Zero fluctuation. Moving slower at the "locked in" usage % than it did during the fluctuation phase, but using much more CPU per instance, with almost zero fluctuation.
• 40-50 minutes - Again, now we're fully locked in for good. There is no more fluctuation at all from here on out. In order to get back to proper fluctuation / low CPU usage per instance, you'll have to reset the add on every 45 minutes.

Common CPU usages on Windows 7. Note that the Windows 7 "lock in" phase is where on Windows 10 the "CPU leak" occurs and the CPU usage moves to 100% regardless of cores/threads available, even on the Threadripper 1950x with only 250 threads running on 1 instance.

100 threads per instance, 25 timeout.

i9-7940x (14c/28t) during "locked in" phase - 7% per instance

Dual Xeon E5-2695 v2 (24c/48t) during "locked in" phase - 5% per instance

Xeon E5-2680 (8c/16t) during "locked in" phase - 15% per instance

Once the "lock" happens, we're not going down again. The first 30-45 minutes of every run are perfect. Fluctuating CPU usage dependent on the URLs being analyzed. Proper discarding of closed threads and resetting of CPU, everything is fantastic. Once the "lock" or "CPU leak" happens, you either let the instances run at the "core scaled" CPU usage, or you have to close / save not completed / restart every 45 minutes.

There's no way I have the time to do that every 45 minutes, so I just let the instances run at the "locked" CPU usage amounts. I really hope this issue can be fixed in the future.

FYI - If you want to log into one of my servers, you can, no problem. You will be able to see the "lock in" phase happen in real time. It's on my home network but I trust the developers of this software enough to allow it. But this issue is repeatable across all servers regardless of CPU(s).

 

[nycdude]

Hey Loopline, I Love the new updates to Link extractor but the CPU use is insane on my i7.

 

[blinggam]

Hey Loopline, I Love the new updates to Link extractor but the CPU use is insane on my i7.

SB support just responded to my post by email and said they're making substantial changes to link extractor in the next update. Hopefully this issue will be resolved!

 

[mastervit]

Hello @loopline
Please check if there is a problem with social account scraper addon. Seems like it is not working at the moment . I've tried reinstall addon, update scrapebox , nothing works ..always i have 10054 error . Previously it worked well .
Looking forward your answer

 

[loopline]

Hello @loopline
Please check if there is a problem with social account scraper addon. Seems like it is not working at the moment . I've tried reinstall addon, update scrapebox , nothing works ..always i have 10054 error . Previously it worked well .
Looking forward your answer

If you go too fast, sometimes you get that. Its working for me though. Try lowering connections to 1 with no proxies. Or try lower connections and private proxies. Public proxies can also cause that error so if you are using public proxies then just don't use them, 1 connection and no proxies is better.

 

[falconsam4]

[/QUOTE]
How I will receive the software and the activation keys?

 

[loopline]

How I will receive the software and the activation keys?[/QUOTE]
you can download the software here
http://www.scrapebox.com/payment-received

There is no activation "key".

you use

Your name
Your Paypal payment email
Your paypal transaction or Receipt ID

and they match up your info against the payment and activate it manually in 12 hours or less after you submit for activation.

 

[mastervit]

If you go too fast, sometimes you get that. Its working for me though. Try lowering connections to 1 with no proxies. Or try lower connections and private proxies. Public proxies can also cause that error so if you are using public proxies then just don't use them, 1 connection and no proxies is better.

Thanks for your fast reply @loopline . The problem i have with social account scraper affected only to the specific types of websites ,here are few examples :
calabar-imports.com
handmadesoap.com.tw
scottishandirishstore.com
americanmortuarycoolers.com
blisspourlhomme.com
skenebrackets.com
topnotchloot.com
seedling.com

I have contacted to the support and they sent me an answer and screenshot of successful scraping . I asked again about connections values and details but no response from them since few days .
So i ask here for help , because i have tried everything (update scrapebox,reinstall addon, various ips, custom user agent ...etc,no proxies ,low connections )
I wouldn't ask if i hadn't seen screenshot with successful scrape, so please take a look at it .

 

[loopline]

Thanks for your fast reply @loopline . The problem i have with social account scraper affected only to the specific types of websites ,here are few examples :
calabar-imports.com
handmadesoap.com.tw
scottishandirishstore.com
americanmortuarycoolers.com
blisspourlhomme.com
skenebrackets.com
topnotchloot.com
seedling.com

I have contacted to the support and they sent me an answer and screenshot of successful scraping . I asked again about connections values and details but no response from them since few days .
So i ask here for help , because i have tried everything (update scrapebox,reinstall addon, various ips, custom user agent ...etc,no proxies ,low connections )
I wouldn't ask if i hadn't seen screenshot with successful scrape, so please take a look at it .

I noticed there is now a new version of the social account scraper, so update and try that. Sometimes it takes a while for support to be able to reproduce the issue and then fix it. Let me know if it still doesn't work after the update.

 

[mastervit]

I noticed there is now a new version of the social account scraper, so update and try that. Sometimes it takes a while for support to be able to reproduce the issue and then fix it. Let me know if it still doesn't work after the update.

After installing new version problem solved. Thanks

 

[loopline]

After installing new version problem solved. Thanks

Sweet, glad its sorted!

 

[loopline]

wanted to say thanks for adding dom detailer to the expired domain finder. I find dom detailer a much better option then having to pay majestic, its much more cost effective.

 

[traff_hunter]

Any ideas how i can scrape snippets from 1-st page google for my keyword list and save it after that? I find meta scraper, but i need snippets.
Can i make my own custom plugin?

 

[loopline]

Any ideas how i can scrape snippets from 1-st page google for my keyword list and save it after that? I find meta scraper, but i need snippets.
Can i make my own custom plugin?

You would have to build your own custom scraper. You could probably modify the custom harvester engine under settings >> harvester engine configuration. Just try the google one and change the before and after markers. Then save it as a new engine.

 

[syrk]

I'm having trouble with the Social Account Scraper
When I click start I get status message "error connecting with SSL.
please help!

 

[syrk]

Also, When i grab emails by crawling. I save URLs with email. and get :
[email protected]|https://9.solutions/

How do I upload to Google Sheets/excel document and have it separated into 2 different columns?

 

[loopline]

I'm having trouble with the Social Account Scraper
When I click start I get status message "error connecting with SSL.
please help!

Are you using the latest version? Because there was some recent update(s) to it to address a few issues.

Also are you on mac or windows?

Also, When i grab emails by crawling. I save URLs with email. and get :
[email protected]|https://9.solutions/

How do I upload to Google Sheets/excel document and have it separated into 2 different columns?

I am not a google sheets expert. in excel you would just save the file as a .csv and open it and use the pipe key | as the delimeter. Im sure there is a way in google sheets, but honestly I only use google sheets at a basic level and out of necessity because people I work with use them.

 

[syrk]

Are you using the latest version? Because there was some recent update(s) to it to address a few issues.

Also are you on mac or windows?



I am not a google sheets expert. in excel you would just save the file as a .csv and open it and use the pipe key | as the delimeter. Im sure there is a way in google sheets, but honestly I only use google sheets at a basic level and out of necessity because people I work with use them.

I am on Windows. I received my license August 6th. How recent was the update?

 

[syrk]

Holy sh*t i just downloaded the update and it works!!!!!! thanks