[BETA] Instagram Automation Bot | GMT2

[LSFC]

I still can't use the Tool properly.
Signed In my account successfully, loaded template and nothing happen. Status is "Done", Next Action: N/A (Last error N/A).

Any tips?

 

[JJJackson]

I still can't use the Tool properly.
Signed In my account successfully, loaded template and nothing happen. Status is "Done", Next Action: N/A (Last error N/A).

Any tips?

Are any of the modules enabled in the settings tab? If not, try enabling them.

 

[chrispliakos]

Just checked the new update!
Yep,new graphs are cool at interacted users!
Good job @JJJackson!

 

[marly]

It keeps on 'scraping items'. Set everything nicely. Did it for a big account fitnessgirlsmotivation. Hard time finding solution

 

[marly]

07/21/2017 22:05:54 https://www.instagram.com/fitnessgirlsmotivation/ Scraping fitnessgirlsmotivation followers
07/21/2017 22:00:05 https://www.instagram.com/fitnessgirlsmotivation/ Scraping fitnessgirlsmotivation followers
07/21/2017 22:00:00 N/A Getting user feed
07/21/2017 20:51:32 https://www.instagram.com/fitnessgirlsmotivation/ Scraping fitnessgirlsmotivation followers


Doesn't seem like any progress being made?
If there should be a max because fgm has 5,5 million followers, there is no 'max scrape per rotation'. Anyhow it keeps scraping and I see no single follow, and I wouldn't mind tbh. I think I will have some patience and hope for a reply tomorrow.

 

[JJJackson]

07/21/2017 22:05:54 https://www.instagram.com/fitnessgirlsmotivation/ Scraping fitnessgirlsmotivation followers
07/21/2017 22:00:05 https://www.instagram.com/fitnessgirlsmotivation/ Scraping fitnessgirlsmotivation followers
07/21/2017 22:00:00 N/A Getting user feed
07/21/2017 20:51:32 https://www.instagram.com/fitnessgirlsmotivation/ Scraping fitnessgirlsmotivation followers


Doesn't seem like any progress being made?
If there should be a max because fgm has 5,5 million followers, there is no 'max scrape per rotation'. Anyhow it keeps scraping and I see no single follow, and I wouldn't mind tbh. I think I will have some patience and hope for a reply tomorrow.

Used your filter (Followers of fitnessgirlsmotivation), and didn't have any issues? Could you upload your settings?

 

[marly]

I got it to work! It seems like I couldn't get the like module to cooperate correctly. When I turned it off it worked. I am now doing it. If you want, just for the heck of it, I could run some tests tomorrow. If there is anything can do contact me about it.

Also thanks a lot for your quick reply I fear if your reply hadn't come this quick I wouldn've been as enthusiastic about your product as I am now.

Also, instagram has a daily follow limit right? Do you recommend leaving it on until failure and letting the bot try until it can follow again? Or do you recommend some setup? At least for safety. My account is like 4 to 5 years old probably works in my favor but safety first.

Also, does your bot follow the latest followers of that account to newer?

 

[JJJackson]

I got it to work! It seems like I couldn't get the like module to cooperate correctly. When I turned it off it worked. I am now doing it. If you want, just for the heck of it, I could run some tests tomorrow. If there is anything can do contact me about it.

Also thanks a lot for your quick reply I fear if your reply hadn't come this quick I wouldn've been as enthusiastic about your product as I am now.

Also, instagram has a daily follow limit right? Do you recommend leaving it on until failure and letting the bot try until it can follow again? Or do you recommend some setup? At least for safety. My account is like 4 to 5 years old probably works in my favor but safety first.

Also, does your bot follow the latest followers of that account to newer?

Yeah, would be great if you could report any bugs you encounter. As for IG limits, the current limits seems to be around 40-50 follows per hour max and 900-1000 follows max per day - so I would at least set the maximum per hour and day settings.

When you have a filter to follow the followers of a user, the bot will scrape the newest followers first and keep scraping more followers till it has enough users to follow (filtering these users ofc)

 

[marly]

Good, and if you just keep it on, always. Would it scrape again the next day when it is ready to follow, or just continue the same list? Also, are there any consequences following more then 50 per hour, like I am now I guess 2/300, but with the max set on 970.

 

[marly]

By the way I got the unfollower on at the same manner, 970 a day, only users that don't follow back, and users that I followed for 3 days. Liker also on, made a schedule to make it seem real. Did quite some likes, think Ill send a lot of likes a day hahaha. but only between certain hours, etcetera.

 

[JJJackson]

Good, and if you just keep it on, always. Would it scrape again the next day when it is ready to follow, or just continue the same list? Also, are there any consequences following more then 50 per hour, like I am now I guess 2/300, but with the max set on 970.

By the way I got the unfollower on at the same manner, 970 a day, only users that don't follow back, and users that I followed for 3 days. Liker also on, made a schedule to make it seem real. Did quite some likes, think Ill send a lot of likes a day hahaha. but only between certain hours, etcetera.

It will again scrape the new fresh followers every time it performs an operation. It will ignore however users you are already following. If you follow too many users per hour, you might get a temp ban from following users which can last from a couple of hours to a few days.

As for unfollowing, the limit is much higher (200 per hour).

 

[marly]

Last questions are actually:

- Is it dangerous to set follow per hour 60+, what would you aim at max?
- Is it possible to use all 3 of your methods at once ( even though it only shows one, for example liking posts ).

Cheers bro!

 

[JJJackson]

Last questions are actually:

- Is it dangerous to set follow per hour 60+, what would you aim at max?
- Is it possible to use all 3 of your methods at once ( even though it only shows one, for example liking posts ).

Cheers bro!

1. possible - a few weeks ago the limit was much higher (around 100) but recently ig has been getting stricter so I would not set the hour limit above 45.
2. Yes, it's fine - The bot won't run 2 operations at the same time anyway.

 

[dragondf]

Hello OP!

I'd like to inform: for some reason I tried to start the software today using a desktop icon and.. the software was not there anymore.
Strange.

I have just downloaded a new version: 0.46 ( I had 0.44)

What could happened?

AVG anti virus?
I am using Win 7 ultimate + AVG free.

Where can I find my (old) saved templates?

DragonDF > AppData > Local > gmt2 > save > templates

There is no template there.


I could see the new version is just a .EXE file. I could not see new directories. Maybe I am wrong.

I could login in the accounts after a few tentatives. It is working fine at this moment. But I think I will need to create new rules to the template, again.

Thank you!

 

[dragondf]

I do not know what is happening.

I have just started the new version, insert 2 accounts, created 2 new templates and as it was reading something I did not want to.. I closed the software and clicked in the Setup.exe file again.

It started a NEW software with no accounts inside it.WoW

How can I start the 0.26 version I created 2 accounts and templates?

I hope you can understand but I can not start all templates (create new setup) each time I start this service.


Tks!

 

[chrispliakos]

Hello OP!

I'd like to inform: for some reason I tried to start the software today using a desktop icon and.. the software was not there anymore.
Strange.

I have just downloaded a new version: 0.46 ( I had 0.44)

What could happened?

AVG anti virus?
I am using Win 7 ultimate + AVG free.

Where can I find my (old) saved templates?

DragonDF > AppData > Local > gmt2 > save > templates

There is no template there.


I could see the new version is just a .EXE file. I could not see new directories. Maybe I am wrong.

I could login in the accounts after a few tentatives. It is working fine at this moment. But I think I will need to create new rules to the template, again.

Thank you!

Had the same problem with the desktop icon. The problem was my Antivirus. Try to disable it,redownload the .exe file,after install etc... create an exception for the program!

 

[JJJackson]

I do not know what is happening.

I have just started the new version, insert 2 accounts, created 2 new templates and as it was reading something I did not want to.. I closed the software and clicked in the Setup.exe file again.

It started a NEW software with no accounts inside it.WoW

How can I start the 0.26 version I created 2 accounts and templates?

I hope you can understand but I can not start all templates (create new setup) each time I start this service.


Tks!

As chris said, it's prob your AV. I must be deleting important files for the tool to run.

 

[novastar]

Great tool so far. Just a few more suggestions

- the ability to have a range for followers max day. i.e the ability to follow between 400 and 500 a day
- the sync does not update description or own profile image.
- add fbr to detail info on summary tab.

Is any way you update your profile from within GMT2?

 

[LSFC]

New version here.
Where i can see improvements?

 

[JJJackson]

Great tool so far. Just a few more suggestions

- the ability to have a range for followers max day. i.e the ability to follow between 400 and 500 a day
- the sync does not update description or own profile image.
- add fbr to detail info on summary tab.

Is any way you update your profile from within GMT2?

Thanks for the suggestions. Sync does not update the description because that is not meant to update. That is for you, to write anything about your account. As for the profile picture not updating, that will be fixed.

I am not sure what you mean with "fbr"

New version here.
Where i can see improvements?

Sorry, forgot to mention the changes.
The biggest change is that now you can comment on users post after following them. Full spintax support for comments.