Permanently Closed Marketplace Sales Thread
- Thread starter jimbobo2779
- Start date
- Status
- Sep 17, 2008
- 6,037
- 3,974
Yeah sorry about that, I have had a lot of support requests this past week as I am sure you are aware so I struggle remembering everyones specifics.
The main things I would look at would be that your private proxies are working correctly, there are plenty of proxy checkers out there but I would use a well known application that you can download rather than an online checker as you never know if they cache results.
Also how do you have proxy goblin setup? If you are searching for many hundreds of proxies then it will not output the working proxy list very regularly, ideally you want the proxies updating every 15minutes. You can check the logs in Proxy Goblin to see the times it finishes a run. Also I am not sure how well their NHSEO integration is working so make sure you are making PG output to a file and then loading in with NHSEO from that file. Lanx's instructions seem to cover it.
If you have only done 900 posts in 7 hours (and you only have 1 or two profiles running) then either the targets are not being found (bad searching proxies) or it is not posting properly (bad posting proxies). Bad posting proxies would likely result in a high number in the "Comments Attempted" column of the profile list. It is normal for this figure to be anywhere up to double the posted figure but if it is many times higher then it would indicate posting proxies are at fault.
You can tell a lot by looking at the log, if you see either lots of searching with not many results being returned or lots of posts failed for example it would give an idea of what part of the system is not working how it should.
There are a couple on youtube. Once I get the proxy harvester in I will be doing lots of videos and guides to add to the support forum to help with all of the new proxy controls.
royalmice
BANNED
- Aug 23, 2007
- 1,186
- 990
download
Supreme Member
- May 4, 2010
- 1,272
- 715
Yep, this is my exact problem too. Experienced it with all the versions as well as the new one.
I have tested my private proxies in SB and they work perfectly. Passed Google. IP test passed and time averages round 150.
Do you mean the interval? At the moment the interval in automated scraper is set to 10min. When I test IPs in the file PG generates they don't all pass in SB? Why doesn't PG filter out the failed ones first?
When you make a task in PG do you check 'only google friendly' ? Right now I have it appending to txt file.
Is there anything specific to change in the settings tab in PG?
It must be something to do with the searching proxies.. Any more ideas on how to get this working or should I just wait for the next update?
Last edited:
saladfingers
Junior Member
- Aug 9, 2011
- 100
- 9
Not sure what you did in the last few updates Jimbo but NHSEO is working way faster than ever, I've got it running in the background 24/7 on 15 threads with 5 for searching and it's going fast enough for me to have a few hundred new links per day.
Great job!
Great job!
Lanx
Regular Member
- Jan 15, 2008
- 354
- 103
just right click on the profile and you get a menu for output options,
posted/confirmed and such.
gamingmaster42
Regular Member
- Jul 21, 2010
- 475
- 181
Also getting this. The program stops posting and seems to get stuck at Updated profile: http://www.mysite.com, but if I stop the threads and restart the program then it continues. Any fix?
saladfingers
Junior Member
- Aug 9, 2011
- 100
- 9
Tried lowering your search threads or using private proxies for search threads?
- Sep 17, 2008
- 6,037
- 3,974
I'm going to look into this further as since the last update I have not been able to replicate this on any of my three test machines or my VPS. If you want to try out a test version I have that then PM or email me and I'll get it out to you tonight. The test version is the same only it uses different access code which is where the issue seems to be.
Did you change anything?
When you have PG harvest proxies it is still finding public proxies which are liable to go dead at any moment which is why it is very important to have it checking for proxies almost non-stop to ensure that you have working proxies the whole time. This is why I was stressing the fact that in the PG log you should see it updating the list every 15mins max, if it is updating less often than this then set Interval to 0 and make sure it is only searching for about 50 proxies so it isn't spending too much time looking for new proxies while the ones it has already found are going dead.
Google verified proxies aren't necessary so don't enable this as PG will spend far too much time looking for proxies. I also set the file to overwrite so you do not have old proxies sat in there that no longer work.
I'm glad I'm not the only one with a working copy. Out of interest are you using public or private proxies for searching?
- Apr 25, 2011
- 19,848
- 28,296
This is running quite well for me. I have been running for about 10 days I think.
I did do some bookmarking as well on the site in question, but apart from that I havnt done any other Seo recently and my site has gone from #9 - #4
the sites about 6-7 months old and is only a MNS but this seems good.
I am also running a set of tier 1 props on the software, that's not had any effect yet, but they have only been in there for a few days.
That's just my experience so far
I did do some bookmarking as well on the site in question, but apart from that I havnt done any other Seo recently and my site has gone from #9 - #4
the sites about 6-7 months old and is only a MNS but this seems good.I am also running a set of tier 1 props on the software, that's not had any effect yet, but they have only been in there for a few days.
That's just my experience so far
topdost
Regular Member
- Oct 10, 2011
- 364
- 51
Bing is no more used , NHSEO uses yahoo now .
My total currently is 182 and if I do a link check it will probably drop a little but so far I have been steadily gaining links. I do have some bad word filters in place and in the 'more app settings' tab I have max outbound links set to 500. I think my confirmed count is lower than others report because I have these restrictions in place?
My max threads is set to 15, allowed searching = 4 and I turn Captcha Sniper turn off when I need to use port 80 which is annoying. Any ideas how to get CS working on another port? I tried changing my apache port but it started eating up to much time so I decided to turn CS off in the mean time.
I have set PG interval 15min and in NHSEO to continually update from the file 9000000ms (15min). Also followed your other recommendations on how to set up PG. Thanks.
My max threads is set to 15, allowed searching = 4 and I turn Captcha Sniper turn off when I need to use port 80 which is annoying. Any ideas how to get CS working on another port? I tried changing my apache port but it started eating up to much time so I decided to turn CS off in the mean time.
I have set PG interval 15min and in NHSEO to continually update from the file 9000000ms (15min). Also followed your other recommendations on how to set up PG. Thanks.
- Status