Permanently Closed Marketplace Sales Thread

[Scritty]

Lowering the search threads to a single digit number (I just use 5) and running on 25 dedicated proxies seems to work fine.

Post on anything up to 50, scrape and search on 5. If you are running less than 20 profiles this seems ok.

If you are running more than 20 profiles then you may want to get more proxies (or deactivate some profiles for a while)

Yeah - that sounds grim a 5-1 ratio of proxies to scraping threads, but I don't want to burn these out.

Scritty

 

[topdost]

When you are expecting to release the version with proxies harv. and which provider is so far giving you best result on private proxies . How many should be bought and how long it take them to be burnt . Regards

 

[swheat]

v1.6.23 was released just 2 hours before your post so you haven't been running it for 24hours, it is very likely if you run with the latest version and have working proxies it will work. It was probably v1.6.22 that you were using that didn't appear to be posting links correctly but this has been fixed in v1.6.23.

All you need to do is get your proxy harvester to output around 50-150 proxies to a file as often as possible. If you set your harvester to get hundreds or thousands of proxies it is having to search for a much higher amount than you would ever need. You can lower the time delay in the proxy settings tab for loading the file to get it to load your proxy file every 5 minutes (set delay to 300,000) instead of the default.

Say you have it set to output 1000 proxies with an interval of 15minutes. By the time the harvester has found the 1000th proxy the other 999 have had maybe an hour or more to go dead or become unreliable, give it another 15minutes and you will barely have any working proxies in that list. Then the harvester, after waiting 15mins, starts again and doesn't update that original list for maybe another hour so you literally have proxies that have been in your list for about 2hours or more which is far too long for public proxies.

You are better off running with less proxies that work and are replaced more often than a big list of proxies where more than half are totally dead.

I have adjusted the pg scraper interval to 5mins and nhseo file delay 3000000. There are only on average 20 - 40 proxies in the file PG creates every 5 minutes. How can I increase this to 50-150? Even when I test a fresh batch of proxies from PG they still fail in SB. Something must be wrong? Can you check my screenshots and see if anything is looking funny?

PG doesn't appear to be filtering out the failed proxies before dumping them into the txt file?

In NHSEO I have one profile active with 5 keywords and it currently has 212 confirmed links.

 

[kideze]

5000 comments posted and only 93 confirmed links....is anybody else seeing numbers like these?

 

[ExtraWinner]

5000 comments posted and only 93 confirmed links....is anybody else seeing numbers like these?

Do you use private proxies?
Its same as with Scrapebox - you need proper and clean proxies to make this thing working at its best...

 

[jimbobo2779]

Lowering the search threads to a single digit number (I just use 5) and running on 25 dedicated proxies seems to work fine.

Post on anything up to 50, scrape and search on 5. If you are running less than 20 profiles this seems ok.

If you are running more than 20 profiles then you may want to get more proxies (or deactivate some profiles for a while)

Yeah - that sounds grim a 5-1 ratio of proxies to scraping threads, but I don't want to burn these out.

Scritty

5 scraping threads should be plenty for most users' needs. If you are using private proxies for searching you will spend less time searching and more time posting.

When you are expecting to release the version with proxies harv. and which provider is so far giving you best result on private proxies . How many should be bought and how long it take them to be burnt . Regards

The proxy harvester is going to be released when it is ready.

For private proxies I haven't had much chance to test many out yet, I use buyproxies.org proxies on one of my test machines and they work fine up to 15 posting threads (10 connection limit on the proxies). SQUID proxies have sent me some proxies to test out but I haven't had chance yet to see how good they are, I know they also have a 10 connection limit so you would be limited to 15 threads also.

I have adjusted the pg scraper interval to 5mins and nhseo file delay 3000000. There are only on average 20 - 40 proxies in the file PG creates every 5 minutes. How can I increase this to 50-150? Even when I test a fresh batch of proxies from PG they still fail in SB. Something must be wrong? Can you check my screenshots and see if anything is looking funny?

PG doesn't appear to be filtering out the failed proxies before dumping them into the txt file?

In NHSEO I have one profile active with 5 keywords and it currently has 212 confirmed links.

A few big things you will want to change. You have the delay in NHSEO set to 3,000,000 which is 50 minutes, this wants to be 15minutes at max with 5 being a decent amount of time, for 5 minutes this delay should be set to 300,000.

Scraping elite proxies in PG can take a much longer time than just anonymous proxies. I find plenty of success with anonymous when searching, you will get a much fresher list updated more often when harvesting anonymous proxies compared to elite.

You will want to check "Enable Auto Kill", auto kill somewhere betwen 50-100 working proxies.

5000 comments posted and only 93 confirmed links....is anybody else seeing numbers like these?

Please see this forum post about keyword choice it also gives an idea of how many links can be expected from whois/comment/trackbacks posted.

 

[saladfingers]

15 max threads with 5 for searching is working wonders for me, I run 5 profiles at a time on a 20/1mbit connection

 

[swheat]

The proxy harvester is going to be released when it is ready.

Will the proxy harvester you are building effectively eliminate tools like PG?

A few big things you will want to change. You have the delay in NHSEO set to 3,000,000 which is 50 minutes, this wants to be 15minutes at max with 5 being a decent amount of time, for 5 minutes this delay should be set to 300,000.

Scraping elite proxies in PG can take a much longer time than just anonymous proxies. I find plenty of success with anonymous when searching, you will get a much fresher list updated more often when harvesting anonymous proxies compared to elite.

You will want to check "Enable Auto Kill", auto kill somewhere betwen 50-100 working proxies.

OK thanks for the specifics I have adjusted this on my side now so hopefully everything will be smooth now lol 50 minutes doh

 

[kideze]

Do you use private proxies?
Its same as with Scrapebox - you need proper and clean proxies to make this thing working at its best...

with private proxies.....been posting FASTER then ever before.

 

[fad3r]

5 scraping threads should be plenty for most users' needs. If you are using private proxies for searching you will spend less time searching and more time posting.



The proxy harvester is going to be released when it is ready.

For private proxies I haven't had much chance to test many out yet, I use buyproxies.org proxies on one of my test machines and they work fine up to 15 posting threads (10 connection limit on the proxies). SQUID proxies have sent me some proxies to test out but I haven't had chance yet to see how good they are, I know they also have a 10 connection limit so you would be limited to 15 threads also.



A few big things you will want to change. You have the delay in NHSEO set to 3,000,000 which is 50 minutes, this wants to be 15minutes at max with 5 being a decent amount of time, for 5 minutes this delay should be set to 300,000.

Scraping elite proxies in PG can take a much longer time than just anonymous proxies. I find plenty of success with anonymous when searching, you will get a much fresher list updated more often when harvesting anonymous proxies compared to elite.

You will want to check "Enable Auto Kill", auto kill somewhere betwen 50-100 working proxies.



Please see this forum post about http://nohandsseo.com/forum/viewtopic.php?f=6&t=16 it also gives an idea of how many links can be expected from whois/comment/trackbacks posted.

I just contacted buyproxies and they said the limit is 100. I am a customer and I use NHSEO with 30 - 50 threads and there is never a problem

 

[jimbobo2779]

with private proxies.....been posting FASTER then ever before.

Yep its amazing how much difference private proxies make for searching, I still get good results using Proxy Goblin (I really should sign up to their affiliate program) but the speed in searching is not really comparable.

I just contacted buyproxies and they said the limit is 100. I am a customer and I use NHSEO with 30 - 50 threads and there is never a problem

Guh... I'm such an idiot.

I even just checked on their website and it does say clear as day 100 connection limit. Thanks for clearing that up for us (and especially me).

If anyone is interested I have written a guide to setup proxy tools for No Hands SEO.

 

[supramanneke]

I don't know, maybe I'm an idiot, but I better ask instead of keeping wondering.
When I do check links on the tool, I do see all the links, but next to them, in the columns "exists" and "pinged" , both columns are always "n" ... Does that mean that the link does not exist and that it has not been pinged?
I'm asking this, because this is all I get.
I can see the tool did a lot of work, and all this on automatic pilot. But, what is the result in the end? I don't quite understand. (with SB, it's easy; you can check all your links and see for yourself; but here, I'm not sure what I have to do)

Then, something else: imagine I want to blast my website, without really paying attention to the quality of links. So, I want to build a ton of backlinks using NHSEO. Is there anything you can recommend, in terms of how to target as many websites as possible? I mean, settings to be used, maybe some kind of text to be altered or anything like that...
I hope you understand what I mean. I'm used to working with SB, so this is a little bit new to me.

Many thanks in advance!

 

[kideze]

with private proxies this program is running faster then ever, one thing though: When adding new profiles in the same niche there should be an option to use confirmed links on other profiles with out having to search all over again, would help a whole lot

 

[topdost]

First of all your latest version is showing excellent results on confirmed links .

Also 1 problem , as the emails are ranomly generated its creating a issue , when the domain is not valid its getting listed against the ip , meaning its making difficult for private proxies for posting and easy .

Just did a test on of my ips entering that at http://stopforumspam.com/search shows the emails used by NHSEO as "bad" email domain .

So is there any way to enter own specified range for email domain .

thanks

 

[swheat]

Confirmed links are coming in slowly but steadily now. Thanks Jim your a legend

I have not turned on Captcha Sniper since fixing PG and NHSEO settings but I will try CS when I am not using port 80 and hopefully report back with even better results!

 

[davids355]

This is running quite well for me. I have been running for about 10 days I think.

I did do some bookmarking as well on the site in question, but apart from that I havnt done any other Seo recently and my site has gone from #9 - #4 the sites about 6-7 months old and is only a MNS but this seems good.

I am also running a set of tier 1 props on the software, that's not had any effect yet, but they have only been in there for a few days.

That's just my experience so far

Site is now at #3
I have added another mns now - this one is not in top 100 at moment...

 

[jimbobo2779]

I don't know, maybe I'm an idiot, but I better ask instead of keeping wondering.
When I do check links on the tool, I do see all the links, but next to them, in the columns "exists" and "pinged" , both columns are always "n" ... Does that mean that the link does not exist and that it has not been pinged?
I'm asking this, because this is all I get.
I can see the tool did a lot of work, and all this on automatic pilot. But, what is the result in the end? I don't quite understand. (with SB, it's easy; you can check all your links and see for yourself; but here, I'm not sure what I have to do)

Then, something else: imagine I want to blast my website, without really paying attention to the quality of links. So, I want to build a ton of backlinks using NHSEO. Is there anything you can recommend, in terms of how to target as many websites as possible? I mean, settings to be used, maybe some kind of text to be altered or anything like that...
I hope you understand what I mean. I'm used to working with SB, so this is a little bit new to me.

Many thanks in advance!

Link checking is done automatically and when a link is found the page gets saved as having a confirmed link, this can be seen in the righter most column of the profile list. When you are checking your links with the link checker you are checking the unconfirmed links by default (the middle option when checking the links), you can change this to check any type of post.

Repeatedly checking the links is a big time sink and isn't really advised as the time spent checking for links would probably be better spent actually getting more backlinks. I like to leave a few links for the SEs to find naturally rather than pinging 100% of the links created.

First of all your latest version is showing excellent results on confirmed links .

Also 1 problem , as the emails are ranomly generated its creating a issue , when the domain is not valid its getting listed against the ip , meaning its making difficult for private proxies for posting and easy .

Just did a test on of my ips entering that at http://stopforumspam.com/search shows the emails used by NHSEO as "bad" email domain .

So is there any way to enter own specified range for email domain .

thanks

I don't really understand the issue here I'm afraid. Are you using any other tools or link building methods where you are using an email address with your domain or perhaps sending out emails?

The email addresses randomly chosen by NHSEO are based on gmail, hotmail, yahoo and a few others with a random string so that should not count against you at all. The thing is I know that if I were to add the option to add an email address it would leave too much scope for entering just one or two and they would get blacklisted within minutes and then work against the user while posting.

If you want to PM me the IP address you are concerned about I would be interested to see what it says.

 

[ylsnuha]

I found it.
Thanks.

 

[Gudrulea]

It includes scrapebox backlink comments and xrumer profile links? I mean can you give me an example of what type of backlinks produces this tool?

 

[Lanx]

comments and trackbacks.