Swave
Newbie
- Apr 11, 2014
- 29
- 7
**************************
Update:6/15: I received some help from another BHW member - Now I'm at a consistent 55-60 Lpm on one project with just over a 50% verified rate. So what helped?....
1. Settings: Since I'm blasting a YT video (churn and burn) I really had my settings too restrictive. Thus, I've changed them to allow posting to any/everywhere. I have threads set at 200.
2. List: I knew at some point, getting a list was inevitable if I wanted a jump-start. So, with a list of about 300k, we're cranking out some better Lpm. I might just duplicate that exact campaign 5-10 times, use different articles and different emails.
At the end of the day, who knows if it will help my vid (low comp)...but we'll see.
***************************
Original Post:
(Disclaimer: I'm a noob with GSA)
So, from reading threads and a few PMs, it seems if you really want to kick ass with GSA, you need a high tread count and a good verified list - otherwise you may be stuck in the 1-20 lpm range.
I've scraped my own lists with Scrapebox, de-duped, PR1+, no more than 50obl per page - so I really don't expect a high lpm in this first round to try to build a verified list.
However, I did try to bump up the threads. I've been running at between 150-200 threads (but I only have two campaigns going). However, I just bumped up the threads to 1000 - and yet my CPU usage on GSA barely ever spikes above 9%-10%. In fact, most of the time it's hovering at 0%-1%. Am I not pushing it hard enough or is it just that the CPU usage in GSA is incorrect....or something else?
My Setup:
(1) VPS: from Nukeservers
Update:6/15: I received some help from another BHW member - Now I'm at a consistent 55-60 Lpm on one project with just over a 50% verified rate. So what helped?....
1. Settings: Since I'm blasting a YT video (churn and burn) I really had my settings too restrictive. Thus, I've changed them to allow posting to any/everywhere. I have threads set at 200.
2. List: I knew at some point, getting a list was inevitable if I wanted a jump-start. So, with a list of about 300k, we're cranking out some better Lpm. I might just duplicate that exact campaign 5-10 times, use different articles and different emails.
At the end of the day, who knows if it will help my vid (low comp)...but we'll see.
***************************
Original Post:
(Disclaimer: I'm a noob with GSA)
So, from reading threads and a few PMs, it seems if you really want to kick ass with GSA, you need a high tread count and a good verified list - otherwise you may be stuck in the 1-20 lpm range.
I've scraped my own lists with Scrapebox, de-duped, PR1+, no more than 50obl per page - so I really don't expect a high lpm in this first round to try to build a verified list.
However, I did try to bump up the threads. I've been running at between 150-200 threads (but I only have two campaigns going). However, I just bumped up the threads to 1000 - and yet my CPU usage on GSA barely ever spikes above 9%-10%. In fact, most of the time it's hovering at 0%-1%. Am I not pushing it hard enough or is it just that the CPU usage in GSA is incorrect....or something else?
My Setup:
(1) VPS: from Nukeservers
4 x 3.7GHz CPU
4 GB RAM
120 GB Storage Space
1 GBPS Network
1 Dedicated IP
Windows Server 2008 R2
Proxies: (20) Semi-dedicated from BuyProxies and letting GSA find some public proxies whenever it can.
Last edited:
