Building a mobile proxy

korea master

korea master

Junior Member
Jr. VIP
Joined
May 23, 2022
Messages
101
Reaction score
52
I'm trying to build a mobile proxy for my own use in my program,
In many threads, I learned that it can be made using a raspberry pi, a dongle and a sim card.

How many mobile proxies can I build this way?
Need to do multiple settings?
Can I create multiple IPs with one setting?


will need about 20 4g mobile proxies. There are no 4g mobile proxy vendors in my area.
Build your own as it is used to generate traffic. i am looking for advice
 
Advertise on BHW
which software are you using to build your mobile proxy?
one raspberrypi 4b should be able to handle 20 dongles.
one dongle with sim card can create 1 mobile proxies.
you will need 20 dongle and simcards to build 20 mobile proxies.
 
ohina3 said:
What program you use to make proxies using this setup? I'm interested for PC version and how many can I connect to a pc?
Click to expand...
- Here everything depends on your needs, since we use USB modems, our attention is focused only on the processor, it is a minimum Core i3 (minimum 4 cores). RAM 4 Gb will be enough, drive only SSD - it is just more comfortable to manage, the computer must have an Ethernet connector for the Internet and at least 2 USB connectors. If you have such a unit, you're in luck, if not, you have to build it, again remember the processor, 4 cores at least!

- Orico or Sipolar hubs

- We use our own software to manage and monitor proxies. But you can google on the forums scripts to set up mobile proxy farms

- But the easiest way to setup a proxy on android, simple instructions from iproxy
 
To get up and running quickly, you may wanna take a look at the andriod phone option.

You can everything setup in a day
 
I can provide you with some guidance on building your own 4G mobile proxies using a Raspberry Pi, a dongle, and a SIM card. However, please note that this information is for educational purposes only, and it's crucial to ensure you are adhering to your local laws and regulations.

To build a single mobile proxy, you'll need the following components:

  1. Raspberry Pi (3B, 3B+, or 4B are good choices)
  2. USB 4G dongle (with a compatible SIM card)
  3. Power supply for the Raspberry Pi
  4. MicroSD card (16GB or higher recommended)
  5. Ethernet cable and Wi-Fi or a second USB 4G dongle for internet connectivity
To create multiple mobile proxies, you'll need to set up multiple Raspberry Pi units, each with its own USB 4G dongle and SIM card. Each dongle and SIM card will have a unique IP address provided by the mobile carrier. This way, you can have as many mobile proxies as the number of Raspberry Pi setups you create.

For 20 mobile proxies, you will need 20 Raspberry Pi units, 20 USB 4G dongles, and 20 SIM cards.

Here's a general outline of the process to set up a mobile proxy with a Raspberry Pi:

  1. Flash a Raspberry Pi-compatible OS, such as Raspbian, onto the MicroSD card.
  2. Connect the Raspberry Pi to a monitor, keyboard, and mouse, and boot it up.
  3. Connect the USB 4G dongle to the Raspberry Pi and configure it to use the mobile network as the default internet connection.
  4. Set up the Raspberry Pi as a proxy server using software like Squid, Tinyproxy, or 3proxy.
  5. Configure the proxy server software to allow connections only from your desired IP addresses for security purposes.
  6. Connect the Raspberry Pi to the internet using an Ethernet cable or Wi-Fi (if not using a second USB 4G dongle for internet connectivity).
Repeat this process for each Raspberry Pi unit and USB 4G dongle to create multiple mobile proxies.

Keep in mind that each SIM card will be assigned a unique IP address by the mobile carrier, and these IP addresses may change over time due to the carrier's dynamic IP allocation policies. Consequently, you cannot create multiple IPs with a single setting or device.
 
Exhibit said:
To get up and running quickly, you may wanna take a look at the andriod phone option.

You can everything setup in a day
Click to expand...
do you have any insight or guidance how to work with this option? thanks in advance!
 
korea master said:
I'm trying to build a mobile proxy for my own use in my program,
In many threads, I learned that it can be made using a raspberry pi, a dongle and a sim card.

How many mobile proxies can I build this way?
Need to do multiple settings?
Can I create multiple IPs with one setting?


will need about 20 4g mobile proxies. There are no 4g mobile proxy vendors in my area.
Build your own as it is used to generate traffic. i am looking for advice
Click to expand...
1. raspberry pi install ubuntu 22.04 and install free plan of xproxy, offer free 5 dongles
2. if your dongle + sim card have ipv4 and ipv6, you will get 4 proxy port , include http ipv4, socks5 ipv4, http ipv6, socks5 ipv6
3. you get unlimited IP from your sim card. proxy server will request new ip by airplane on / off via your dongle.
 
korea master said:
I'm trying to build a mobile proxy for my own use in my program,
In many threads, I learned that it can be made using a raspberry pi, a dongle and a sim card.

How many mobile proxies can I build this way?
Need to do multiple settings?
Can I create multiple IPs with one setting?


will need about 20 4g mobile proxies. There are no 4g mobile proxy vendors in my area.
Build your own as it is used to generate traffic. i am looking for advice
Click to expand...

It is possible to build your own mobile proxies manually; the process will be extremely complicated and tough. But there are solutions out there through which you can create your own mobile proxies.

I have personally used hardware rig provided by a renowned company. No technical knowledge or prior experience was needed to launch proxies using them.

As soon as I received hardware from them I inserted SIM cards into each of the dongles. Then, everything was plugged into a computer and powered on. From there, I begin managing my 4G/5G mobile proxies using there proprietary software/dashboard. Entire process was extremely easy and was kind-of plug and play.
 
So for Gmail warming automation activities is this right? with 1 dongle = 1 IP for 1 Gmail account?
 
Advertise on BHW
You must log in or register to reply here.
Sign up now!

Main Menu

Home Main Forum List Black Hat SEO White Hat SEO BHW Newbie Guide Blogging Black Hat Tools Social Media Downloads

Marketplace

Account Selling Content / Copywriting EBooks / Methods Hosting Misc Proxies For Sale SEO - Link building SEO - Packages Social Media Social Media - Panels Web Design More

Making Money

Affiliate Programs Hire a Freelancer IM Journeys Making Money Pay Per Click Site Flipping Want to Buy

BlackHat World

Dispute Resolution Forum Suggestions & Feedback Introductions Lounge
Back
Top