Permanently Closed Marketplace Sales Thread

[TrevorB]

Is it possible to have Scrapebox to automatically save the non-completed footprints in-case it crashes like it automatically saves all the scraped URL's?

Or, automatically save the completed ones so we can remove them from our master footprint list.

The reason I ask is. Today I had it running for a few hours then manually stopped the harvesting and scrapebox crashed on me and asked to send the bug report. Now I have no idea what footprints were completed and which ones weren't from my list.

Yes I know I can just start harvesting from the same list again but, scraping the same footprints to me seems like a waste of resources.

 

[energizedmale]

What's the price of premium plugin article scraper?

 

[softtouch2009]

What's the price of premium plugin article scraper?

http://www.scrapebox.com/article-scraper-plugin

 

[MarkWW]

I have a question about Proxies and Scrapebox's link checker:

At first I entered a working proxy (checked) and then decided to scan a couple blogs against a link they already had.. Link checker showed Found which is good. Then I changed some numbers of the proxy (and checked it to make sure it is not working) and then used the Link checker once again against a couple other blogs which had links in them, again scrapebox returned Found, it was suppose to return an error since the proxy is not working.

Which means.. scrapebox link checker doesn't rely on proxies even when we have UseProxiesInLinkChecker=True in the configuration file.

 

[softtouch2009]

I have a question about Proxies and Scrapebox's link checker:

At first I entered a working proxy (checked) and then decided to scan a couple blogs against a link they already had.. Link checker showed Found which is good. Then I changed some numbers of the proxy (and checked it to make sure it is not working) and then used the Link checker once again against a couple other blogs which had links in them, again scrapebox returned Found, it was suppose to return an error since the proxy is not working.

Which means.. scrapebox link checker doesn't rely on proxies even when we have UseProxiesInLinkChecker=True in the configuration file.

Do you have the "Use proxies" checkbox on the ScrapeBox main gui checked?

 

[proxygo]

What's the price of premium plugin article scraper?

 

[qlithe]

Sometimes I cant stop harvesting, nothing happens when I press the button

 

[scrapefox]

Sometimes I cant stop harvesting, nothing happens when I press the button

Not really a solution, but if you do get this happen again I just wanted to let you know that your harvested URLs should be saved in your "harvester session" folder within the scrapebox folder.

Posted via Topify using Android

 

[TrevorB]

I also having a problem when I manually stop harvesting. Scrapebox crashes, then askes me to send the error report, but when it tries to send it, that gives me an error also that it can't be sent.

That was the reason for my question above about automatically saving completed footprint queries to the same folder scrapebox saves the harvested URL's to.

 

[scrapefox]

Having issues with harvesting Google for some reason...

That's after over an hour of scraping. Proxies aren't Google banned, at least not according to proxy tester.

Try single threaded scraping with those proxies and see if you notice any errors. The proxy checking tool isn't 100% accurate all the time.

 

[loopline]

Looking forward to see it. I talked with some guys that already bought the addon, and they told me that they can post on 1 tumblr, then they need to set up a new account, and so on..

Sorry, I stand corrected, as Sweetfunny said, it can only do 1 at a time.

Hi, I've updated SB to the latest v1.16.0 and installed new Link checker plugin. Today link checking is not working correctly - all results are "Not found". What's happened and how to restore previous version of this Add-on? Thanks.

If you can post some urls and the links that are on them here or send them to support Im sure that would be helpful.

Wow sick update! Any plans to add anything else then commenting? I mean, make it more GSAish Keep up the good work! - Small question: When the results show up as red, does it mean no results found or that the search failed?

Red means not completed. Green means completed, even if 0 results were found.

I keep getting Not Found error when checking links. Any fix?

Ive been running the new link checker in beta for several weeks now and have incorporated it into all my processes and I get more found links then I used to with the same processes, everything else being equal (because of the fact that its faster and pages don't timeout and because I set it to retry on errors). But again if you can give some urls and the links that are on them to support that would be helpful.

Having issues with harvesting Google for some reason... That's after over an hour of scraping. Proxies aren't Google banned, at least not according to proxy tester. Bing is the only one with good results :l

If bing is returning results for the same queries then its most likely that the proxies are blocked. Some queries will have no results. Sometimes bing returns random erroneous results that are stupid and totally irrelevant. But on the large scale its likely that proxies are banned. Google has multiple different levels of IP bans, and the proxy tester only checks for the very most basic keyword. So if your using advanced operators or various queries it can show passed in the tester and then be banned when you try to scrape those queries. I have a video on it here: http://www.youtube.com/watch?v=P9CbGhfc1aY

Sometimes I cant stop harvesting, nothing happens when I press the button

Generally this is because some 3rd party software has hijacked one or more of scrapeboxes threads. This could be because a proxy was blacklisted and an anti-virus locks it or a url that is harvester has malware on it so a malware checker locks it etc... But then scrapebox is stuck in a state of perpetually waiting for that thread to close so scrapebox can finish and the thread is locked. So you either have to kill the process or it results in a crash. So make sure you set scrapebox as trusted/allowed in any anti-virus, malware checkers, firewalls etc...

I also having a problem when I manually stop harvesting. Scrapebox crashes, then askes me to send the error report, but when it tries to send it, that gives me an error also that it can't be sent. That was the reason for my question above about automatically saving completed footprint queries to the same folder scrapebox saves the harvested URL's to.

Click on don't send report and/or save report. Then in your main scrapebox folder will be a bugreport.txt send that to support. http://www.scrapebox.com/contact-us scrapeboxhelp (at} gmail [dot) com

 

[seodeal]

hi

I recently scrape some aa blog list.The list is around 10k.I filter bad and captcha blog with blog analyzer. when i make a blast with scrapebox,i see the success rate too low.i use vps with 100 mb connect and thread is 50.I also optimize my system network as per guideline found on blackhat wold.so system must not be an issue.

however,when i use the same l list on gscraper,the success rate surprisingly goes high.A few days ago,i updated my sb to the latest version and in this version we can see the status while commenting.

On most of the failed links,the status shows "failed detecting form" . and as platform shows "wordpress" .I think scrapebox does not detect old wordpress comment page.Is this the fact???

Thanks

 

[loopline]

hi I recently scrape some aa blog list.The list is around 10k.I filter bad and captcha blog with blog analyzer. when i make a blast with scrapebox,i see the success rate too low.i use vps with 100 mb connect and thread is 50.I also optimize my system network as per guideline found on blackhat wold.so system must not be an issue. however,when i use the same l list on gscraper,the success rate surprisingly goes high.A few days ago,i updated my sb to the latest version and in this version we can see the status while commenting. On most of the failed links,the status shows "failed detecting form" . and as platform shows "wordpress" .I think scrapebox does not detect old wordpress comment page.Is this the fact??? Thanks

It detects old wordpress forms just fine for me. If you can send me a sample list of a hundred or so I can test them and tell you whats up. Feel free to pm me and we can work it out. Or you can mail support and they can help you. scrapeboxhelp (at} gmail [dot) com

 

[qlithe]

The TDNAM addon is giving me the error "Unable to download datafile!"

Everything is up to date. I've tried reinstalling. Deleted sbtdnam.sb. No firewall. Tried with and without proxies (if the addon even uses proxies). No results

 

[Nitros]

How I can access learning mode platform trainer after the update?
I'm talking about this one that was available in addons menu.

 

[loopline]

The TDNAM addon is giving me the error "Unable to download datafile!" Everything is up to date. I've tried reinstalling. Deleted sbtdnam.sb. No firewall. Tried with and without proxies (if the addon even uses proxies). No results

You need to go into the addons folder and delete the sbtdnam.dat file (make sure the addon is closed first) and then launch the addon. The dat file could have become corrupt.

How I can access learning mode platform trainer after the update? I'm talking about this one that was available in addons menu.

Its gone. I am uncertain if you will be able to train new platforms for the new learning mode poster. I mean in theory you could, as the engine files are readable, you would just have to manually do it. With the old learning mode poster, most of the stuff was done on the backend, but it gave less flexability to the user. Which in most cases was good because most people wouldn't be able to handle it. With the new poster the majority of stuff is handled in each engine file, which would give an advanced user more flexibility, but I don't know if they will make a editor for it, or if you would have to do it by hand or long term if the ini files will be editable or encrypted etc...



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

New Poster - Post to 27+ platforms

​

 

[mindmaster]

Page Authority Addon is not working for me today. I get an error message: "Unable to communicate with Scrapebox." All other functions are working.

Anyone getting this as well?

EDIT: I updated the plugin and is working now.

 

[softtouch2009]

Page Authority Addon is not working for me today. I get an error message: "Unable to communicate with Scrapebox." All other functions are working.

Anyone getting this as well?

Did you update the addon to the latest version (1.0.0.3)?

 

[qlithe]

You need to go into the addons folder and delete the sbtdnam.dat file (make sure the addon is closed first) and then launch the addon. The dat file could have become corrupt.

Hm, there is no sbtdnam.dat anywhere in my scrapebox folder..

 

[monk13]

is there any chance that you could add in an ability to filter the "proxy" list in scrapebox, i'm sick of doing accidental portscans on people and getting ddosed for it
if we could get an ability to set a filter that removes all instances of an ip from the proxy list if it shows up more than say 5 times or so that'd be awesome