Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
If this happened when you stopped posting it isn't anything to worry about, if it happened while posting it should have started back up again and carried on without any ill effect also. Did it stop working after this error?

Well this did happen after I stopped, but I had to stop and restart it because it was stuck here for more than a couple hours.
1/17/2012 8:34 PM | Updated profile: http://www.mysite.com/
I think I might be having the same problem as download, but mine is not minimized and still getting this error, never had this error in previous versions. :confused:
 
Just purchased NHSEO. Looks pretty cool :)
 
Well this did happen after I stopped, but I had to stop and restart it because it was stuck here for more than a couple hours.

I think I might be having the same problem as download, but mine is not minimized and still getting this error, never had this error in previous versions. :confused:

I have decided not to look into this issue specifically as the next update is already going to include a completely different searching system than the current system so it is entirely possible that any issue you are having now will not be present in the next version.

Here is snap shot of after running 48 hours for several websites , looking for comments for op and everyone what do you think . Bad / Good / Ok

This was done with private proxies. All sites are from different niches . I have super fast internet and machine .

Also want to to say jimbobo2779 has been very fast on support and support is excellent .

From the image I would be surprised that it was from 48hours of posting, the numbers look fairly low though the ratios are in the region of expectability. It is possible that one of the following situations is happening:
1) Too many threads for your proxies (unlikely tbh)
2) Slow proxies - even paid for proxies can be slow, also not massively likely tbh
3) Slow connection
4) Searching issues - most likely right now

The search results from Bing's API have been becoming less and less reliable recently and this is the reason for changing the whole searching system along with quite a large overhaul of the proxy system to allow multiple sets of proxies for different actions (separate proxies for posting and searching) and also to load proxies from local or remote files.

Just as with v1.6.17, v1.6.19 will not be a small update and as such will require a good amount of testing which sadly cannot be rushed, I am hoping for no more than a few more days.
 
Last edited:
Havnt read the whole thread, but is proxies a must have for this tool ?

Or can I just use my vpn connection and just refresh the ip every day ?
 
I have decided not to look into this issue specifically as the next update is already going to include a completely different searching system than the current system so it is entirely possible that any issue you are having now will not be present in the next version.

Excellent, looking forward to the update. Do you have an estimated day of release? :p

Also, I think I may be having an issue with confirmed links not increasing for some of my profiles (I think it was raised by other people as well). Sorry if I missed it as I didn't read this whole thread, but is that a problem?
 
Havnt read the whole thread, but is proxies a must have for this tool ?

Or can I just use my vpn connection and just refresh the ip every day ?

Currently they are not needed but with the next update will come a new searching system that will be more reliant on proxies, there will be built in support for proxy harvesting tools though. Changing proxy every day will not really be sufficient.

Excellent, looking forward to the update. Do you have an estimated day of release? :p

Also, I think I may be having an issue with confirmed links not increasing for some of my profiles (I think it was raised by other people as well). Sorry if I missed it as I didn't read this whole thread, but is that a problem?

I don't have a date set for the update other than soon. There shouldn't be any issue with links not being detected now as that bug was fixed in v1.6.17.
 
Hi,

I own 1.6.18.0 plus CaptchaSniper 1.4 - is it true, that I have to set NHSEO to 1 thread only that CaptchaSniper can handle the request(s)?

I experience problems when doing threads > 1 ... Captcha Sniper does not solve anymore captchas. If I click on "Test Captcha Sniper" it responds, that either the captchas 16+30 are not ticked OR that connection does not work anymore (Port 80 etc.). No other application runs on it, which uses Port 80.

Maybe it's due to the fact, that Threads > 1 does not work? I also use Scrapebox, where I know, that only Slow Poster SingleThread works for Captcha Sniper ...
 
I have decided not to look into this issue specifically as the next update is already going to include a completely different searching system than the current system so it is entirely possible that any issue you are having now will not be present in the next version.

Okay, will wait for next update.
 
Hi,

I own 1.6.18.0 plus CaptchaSniper 1.4 - is it true, that I have to set NHSEO to 1 thread only that CaptchaSniper can handle the request(s)?

I experience problems when doing threads > 1 ... Captcha Sniper does not solve anymore captchas. If I click on "Test Captcha Sniper" it responds, that either the captchas 16+30 are not ticked OR that connection does not work anymore (Port 80 etc.). No other application runs on it, which uses Port 80.

Maybe it's due to the fact, that Threads > 1 does not work? I also use Scrapebox, where I know, that only Slow Poster SingleThread works for Captcha Sniper ...

Captcha Sniper working with NHSEO has nothing to do with the number of threads in NHSEO, I personally have and do run at around 30 threads without any issue. If you get an error when clicking the test button then you will need to find the problem pointed to in the error.

For example if you get a port 80 error then CS cannot use the port, this is not something that I can do something about as it is to do with CS and your computer, NHSEO does not put a hold on any ports. If you have CS open (and you didn't get any errors when loading it) and captcha type 16 and 30 enabled then you should get an OK from the test button in the settings tab.
 
It could be a bug in the search restrictions, if this is happening you can either run with multiple proxies and/or multiple Bing API IDs. API IDs are easy to get if you have a Windows Live account so if you don't have proxies to use it is a good way to get around it.

If you have proxies or multiple API IDs you can select "unrestricted searching" option in the Settings tab and save the settings. If it is a bug in the search restrictions I will get a fix out tomorrow.

All of this will be redundant in the next update however as I will be switching to harvesting proxies for searching.

I bought 5 dedicated IPs from buyproxies.org (your recommendation) and I have created multiple bing API id's and I have checked 'unresticted searching'. Are you saying what I just did will be a waste of time in the next update?

On another note I am using only 3 of the dedicated IP's in NHSEO and I plan to use the other 2 in scrapebox and the page rank checking software. Do you think it is safe to use all 5 in all applications or is it wise to keep them separate? I am not a big user either I am only working on one website with about 7 keywords.
 
Hey,
New problem I just got: When I click the Play button, it just says "Threads setup" and doesn't do anything. I tried to exit (when I clicked X, the program stopped responding so had to force exit) and open up the program again but it had the same issue. Any advice?
Thanks
 
I've been using "No Hands Seo" running 24/7 for more than a month without noticing any improvement in my ranks.
Am I wasting my time with that application?

Thank you
 
I bought 5 dedicated IPs from buyproxies.org (your recommendation) and I have created multiple bing API id's and I have checked 'unresticted searching'. Are you saying what I just did will be a waste of time in the next update?

On another note I am using only 3 of the dedicated IP's in NHSEO and I plan to use the other 2 in scrapebox and the page rank checking software. Do you think it is safe to use all 5 in all applications or is it wise to keep them separate? I am not a big user either I am only working on one website with about 7 keywords.

As I mentioned a couple of weeks back very shortly after I released the update with the option for entering your own custom Bing APIs that unfortunately it would not be a solution to the searching problems. I have just released the latest update which uses a very different method of searching.

As for sharing the proxies between the apps it really depends on what you are looking to do with them. Doing any kind of searching/harvesting requires public proxies as you will quickly get temporarily limited by any search engine so I wouldn't use private proxies for searching unless you have lots of them, if you are using the proxies to post to different sites it should be fine but I am not overly sure of how the apps use proxies so cannot say for sure.

Hey,
New problem I just got: When I click the Play button, it just says "Threads setup" and doesn't do anything. I tried to exit (when I clicked X, the program stopped responding so had to force exit) and open up the program again but it had the same issue. Any advice?
Thanks

It sounds like something is messed up with your install, have you tried redownloading and installing again? If this does not work please could you setup TeamViewer on your computer and PM me the login details so I can see for myself what is happening with your system.
 
I've been using "No Hands Seo" running 24/7 for more than a month without noticing any improvement in my ranks.
Am I wasting my time with that application?

Thank you

You must be doing something wrong I guess.

I've already seen progress after a only few days testing.

Created 15 web2.0 blogs with different keywords pointing to money site and blasted those blogs with spun comments relevant to my niche/keyword.
Used custom comments and both auto approve lists and inbuilt search for relevant niches.

Already getting more traffic from some of the keywords targeted than before.

Short answer, does actually work... YES it does
 
Just upgraded to 1.6.19.0 and it crashes after running for a few minutes. First time I've experienced any problems with it. Guess it's been broken and sure jimbo will fix it soon
 
554778JIVTLYWDYQKBZNB.jpg


After following upgrade instructions for the latest version.

Jimbo to the rescue!
 
I am happy to know that there will be a built in too for proxy harvesting. When will this be released?
 
ok once you update, and you used the installed remember that it now installs to
program files (x86) so if you have an old install, watch out for your old shortcut.

then enter in your proxies for harvsting.
settings
proxy

and there's a new tab, proxies for searching

click on use proxies

and entering in your proxies/ either pasting

or from a file, which is what you use if you have proxy goblin/proxy multiply (i have goblin)
i guess click on
continually update searcing proxies from file?
click save

i had to restart the program to make it "work" so do that.

and you should be up and running

i'm sure this is covered in the new manual, there's a new manual shortcut too, but i dont' like reading, and i like to answer these things before jimbobo get's swarmed with questions and he can just focus on making the program great.

*sorry for the typo's finance' is sleeping, trying to type lightly*
 
Just upgraded to 1.6.19.0 and it crashes after running for a few minutes. First time I've experienced any problems with it. Guess it's been broken and sure jimbo will fix it soon

What type of error is it crashing on? If there is an error message that would help a lot. Sometimes the download can be corrupted but still manages to install and load up so maybe re-download and reinstall could work.

If reinstalling doesn't work just let me know the type of error and as much info about it and I'm sure I can get it fixed.

554778JIVTLYWDYQKBZNB.jpg


After following upgrade instructions for the latest version.

Jimbo to the rescue!

Is this persisting? It could be that a third party app has set a proxy in windows which is no longer working. You can check this by doing the following:
1) Goto your control panel
2) Goto Internet Options
3) Goto Connections
4) Click on "LAN Settings" button
5) Make sure that "Use a proxy server" checkbox is unchecked or replace the proxy for a working one.

I am happy to know that there will be a built in too for proxy harvesting. When will this be released?

I'm hoping in the next few days but I cannot say for sure when it will be.

ok once you update, and you used the installed remember that it now installs to
program files (x86) so if you have an old install, watch out for your old shortcut.

then enter in your proxies for harvsting.
settings
proxy

and there's a new tab, proxies for searching

click on use proxies

and entering in your proxies/ either pasting

or from a file, which is what you use if you have proxy goblin/proxy multiply (i have goblin)
i guess click on
continually update searcing proxies from file?
click save

i had to restart the program to make it "work" so do that.

and you should be up and running

i'm sure this is covered in the new manual, there's a new manual shortcut too, but i dont' like reading, and i like to answer these things before jimbobo get's swarmed with questions and he can just focus on making the program great.

*sorry for the typo's finance' is sleeping, trying to type lightly*

Good point on the new install location, it will only use an extra 14Mb but every little helps.

Thanks for helping out mate, it really is a help.
 
Status
Not open for further replies.
Back
Top