AMR Results - Updated Stats & Indexing...

Always spin EVERYTHING. There's no point in spinning the content and title and then leaving a whopping great unspun bio as a fingerprint.

Keep Resources short - and don't use them as a soapbox! They're there PURELY for your links. Say the least possible, mega-spin it and use lots of different link URLs and anchors. Loads of articles pointing to the same domain with the same anchor is another fingerprint. I normally do a run with at least 16-20 different URL's and hundreds of varied anchors.

I'm just about to use AMR for the first time, I have a couple questions.

How do you spin the "About Me"?

Also, what is the "pre-pop"?

Another basic question, but I can't find the answer. When doing a run (one blast) how many author accounts do you use, and how do you use more than one at a time? ..Or do you just use one across multiple sites?

I realize you said this: "Don't submit hundreds of articles on the same author. Limit an author to 20/30 articles max, and don't submit every author every day. Rotate authors and use them every OTHER day (or less.) So if 2 articles per day, you need at least 4 authors." But, do you mean hundreds of articles on the same author per individual site, or per run? For example, if I am doing one blast to 200 sites, is one author the way to go (and then wait 2 days for this author), or is this when I should split it up into 6 different authors?

Also, if you do use multiple author accounts is there a fast way to create hundreds of them at a time? I'm using fakenamegenerator, but copying and pasting would be a bit slow going if hundreds of author accounts are required.
 
Last edited:
I normally do a run with at least 16-20 different URL's and hundreds of varied anchors.

You also said this about where the link point to "Direct to the key pages. These are tier 1 content links - like 2.0's - as long as you use quality-spun content."

Using 16 different urls and 100's of KWs, wouldnt you just get a bunch of random anchor texts pointing to irrelevant pages? I guess what im trying to say is why would you have 16 different pages with what I assume to be 100 somewhat related KWs?
 
I use an indexer or build comment links using scrapebox to the articles and have seen good indexation rates post Panda.
 
How do you spin the "About Me"?

Also, what is the "pre-pop"?

When doing a run (one blast) how many author accounts do you use, and how do you use more than one at a time? ..Or do you just use one across multiple sites?

...do you mean hundreds of articles on the same author per individual site, or per run? For example, if I am doing one blast to 200 sites, is one author the way to go (and then wait 2 days for this author), or is this when I should split it up into 6 different authors?

Also, if you do use multiple author accounts is there a fast way to create hundreds of them at a time? I'm using fakenamegenerator, but copying and pasting would be a bit slow going if hundreds of author accounts are required.

I have a huge 'about me' spun construct, which knocks out literally millions of variations - I use if for profiles/everything.

Prep-pop is the button to pre-populate the names field with random/spun values for each signup.

Use a single author to blast the whole run. Don't use the author every day in a row.

You don't need that many accounts. If you're doing 3 full blasts per day, then 6 accounts per fortnight is fine - rotate 3 each day.

You also said this about where the link point to "Direct to the key pages. These are tier 1 content links - like 2.0's - as long as you use quality-spun content."

Using 16 different urls and 100's of KWs, wouldnt you just get a bunch of random anchor texts pointing to irrelevant pages? I guess what im trying to say is why would you have 16 different pages with what I assume to be 100 somewhat related KWs?

A 'properly' spun link block is nested -and only uses the correct anchors for the correct URL. So 16 different URL's - all with their own 8-20 keywords. See our Link Coder demo for examples...

http://www.ubertoolz.com/demo/LinkCoder.php

...This is one of the most powerful and favourite tools. I have hundreds of sites, and generally quite a lot in each niche/topic. So 1 article can normally feed at least 10-20 sites, this way you get a gradual link-build across all sites. It's better to do 20 of these than 1 for each of 20 sites.

I also use 'generic' articles - just an info article on some topic, which won't be contextually relevant to the link, but still has my links in. I want everything to be mixed. You really DON'T need all links to be from relevant content. We build literally millions of links per year, and there is so much untested and unproven talk about 'relevant' links. Some of my most powerful links are from completely unrelated pages. It has to look natural.

I use an indexer or build comment links using scrapebox to the articles and have seen good indexation rates post Panda.

You've been lucky! We've tried this in enormous volume over the last 2 months - and SB gets less effective all the time. We get much better results SB'ing to 2.0's; but article indexation hardly gets affected.

I personally allow article indexation to happen more slowly now - over a few months - it helps with the natural growth pattern. I'm in for the long haul - so immediate indexation isn't important.
 
Last edited:
thanks 4 the great thread and reply

but how many unique percent do you think is not mediocre for greater efficiency?
 
thanks 4 the great thread and reply

but how many unique percent do you think is not mediocre for greater efficiency?

I'm sorry buddy - but I've got NO idea what that line means?! I appreciate you might not be English, but maybe take a little time to craft a question carefully if you want a sensible response.

Or are you just a newb trying to get their post count up! :(
 
i think he means what sucess rate do you consider passable?
 
I've been having the same results. A very slow SERP climb, but steady after blasting with AMR.

However, my problem with AMR is the abysmal approval rate. I've only got 134 directories that have approved articles. I've added thousands of directories, need to figure out how to get a better list or get UAW too. Or have someone blast UAW for me (any takers?).
 
"Of course, manual 2.0's have become the hot & fast indexing item now. And this is the area we're pushing into the hardest."

what do you mean by this, can you explain a bit?
 
"Of course, manual 2.0's have become the hot & fast indexing item now. And this is the area we're pushing into the hardest."

what do you mean by this, can you explain a bit?

'Manually' built web 2.0 properties...

By 'Manually' I mean automated manual systems like ZennoPoster/Magic Submitter etc. And web 2.0's like in phpbuilt's thread:

http://www.blackhatworld.com/blackhat-seo/black-hat-seo/341339-free-current-web2-0-blog-list-60-websites-13.html

...Because these aren't spammed to death (they require more work and effort on your part) and most have high PR's they index easier and offer more link juice generally.

AMR still works well, if it's used properly, but getting articles indexed is massively harder than 2.0's....

For example, a ScrapeBox blast to 2.0's will result in quick indexing, but not for articles any more.
 
i think he means what sucess rate do you consider passable?

Hard to answer without knowing what someone means by success rate...

If he meant successfull full submissions; then any number is better than 0, but I shoot for 700-900. If it goes below 600 then I start hunting for new dir's. And I don't mean auto-approves - just successful/accepted subs....

If he meant 'live' articles, then 200+ should be a minimum after 2 weeks...

If he meant indexed, then 100+ after 3 months is the minimum...
 
I posted this new Thread for Free access to an AMR export file URL extractor...

Very useful!

http://www.blackhatworld.com/blackhat-seo/black-hat-seo-tools/379003-free-amr-tool-export-file-url-list-article-marketing-robot.html
 
However, my problem with AMR is the abysmal approval rate. I've only got 134 directories that have approved articles. I've added thousands of directories, need to figure out how to get a better list or get UAW too. Or have someone blast UAW for me (any takers?).

If anyone wants to post their lists here - we could swap and improve our AA rates.

You can use our free tool to convert your .amrx export files to plain URL lists...
 
jascoken( and everyone else for that matter) iam interested in sharing AA list as well as my own WP blogs (If you are interested ) .

I just cant send PM due to too few posts so please respond in this thread.
 
Here's a post I've just prepared on using our Tools to get the most out of your AMR submission. And it ties in nicely with my tips above...

http://www.blackhatworld.com/blackhat-seo/buy-sell-services/374181-ubertoolz-com-incredible-new-search-engine-optimization-marketing-unique-content-creation-toolset-live.html#post3558873
 
Jascoken, would you be interested in swapping AMR list?
 
I've added a full Guidelines, Tips & Tutorial page around AMR submissions and how to integrate UberToolz into the process here:

http://www.ubertoolz.com/AMRGuidelines.html
 
Hi all,

i don't want to ask this in a new thread:

I took all amr list from BHW 150.000 Urls and checked this with AMR import, that was 27000 checked AMR urls.

How many subs (not live links) do you have from a 27000 amr checked directories.
I have 8000 subs green, but from this 8000 just 1000 subs. And this are 300 live links. Is this normal ? Must i scrape more article list from google too with scrapebox. Or do you mean i make a mistake. My list have 6000 not accepting articles from the green ones.

Thx for your help and sorry for my english.

Cheers
Dang3r
 
Last edited:
Back
Top