D
Deleted member 752298
Guest
@Zwielicht customer support is getting worse and worse. I have been waiting for almost a month for a reply.
Permanently Closed Marketplace Sales Thread
- Thread starter tvm77
- Start date
- Status
Adam Xtubeage
Regular Member
- Jan 31, 2012
- 468
- 192
the bot didn't even open. always ask for username and passowrd and the result "verification error" . Just waste of money. I haven't used this bot for months and today tried to login again the same error message while my login details are same working on the diabolics website but not in the bot. I think the developer whould close this thread or atleast provide proper support
D
Deleted member 752298
Guest
I have send you a PM with my latest attempt to get in touch with you before I submit a thread to the shitlist.
- Nov 14, 2013
- 500
- 157
If the software that counts the traffic accept duplicated IP's then yes
Email us to our support with your username for faster refund
Sorry we can't provide the custom script, but we stop creating custom scripts that the goal was to click in ads. Because most of users were getting banned from the ads providers for bad usage and then blame us
The servers are up and running, please email us to support with your username to check if your account is good. You also might want to check if there's no antivirus or firewall blocking the bot to authenticate with our servers
Adam Xtubeage
Regular Member
- Jan 31, 2012
- 468
- 192
Hi send you a PM as well and i think i should clear it here as well as this is your sales thread and i didn't want to throw any kind of negative comments. Its true that the bot was not running in my VPS. I tried in my 2 VPS one is from France and other one is from Canada. Both have the same verification error message. But today i tried the bot in a new VPS from UK and the verification process just passed in seconds. So, In my thought bot is blocking certain countries IP's for authentication otherwise now the bot is working perfect without any issues
- Nov 14, 2013
- 500
- 157
we will release it this month, and will not using u bot studio
Yes, the bot is working fine and we still scrape, test and deliver more than 500 proxies to the bot and refresh them every 15 minutes
*Most of refunds are from users that couldn't make it work with youtube views (it don't work well with our public proxies scraped) and try to fraud advertisers (we don't support it, and normally the accounts are banned)
builder2024
Newbie
- Mar 15, 2014
- 10
- 3
We discussed that with immortal12, through PMs.
Public proxies are flagged by high security sites like Youtube. You will need to invest in private proxies.
We discussed privately, user requested a refund and got it.
You need to be smart when using such tools. Experimenting on your main site/video is not a good idea.
Yes. I tested it and it works. You will need private proxies. Views attained through public proxies will get removed fast.
Thank you for your help
Doesn't simple_visit module work for your needs?
Depends the amount of proxies. Most people prefer rotating reverse proxies.
Send me a screenshot with your settings. I need to check this.
Do you still experience the same issue?
We can easily simulate from duckduckgo, the others sometime works.
This is how you do it:
1- go to the search engine and make the search with the keyword you want
2- copy the url of the search3- paste that url in the referrals in the bot
3- paste that url in the referrals in the bot
I am not sure if I am understanding correctly your issue. Please send me a PM.
Im unable to private message you. But wondering if you still use this software. I bought it, great pre-sales email responses, but when I found that I could not get the bot to go to the 2nd url in the '2 click' module, no replies. I like so much about the software, refers, random screen resolutions.... but ALL I need it to do is visit one website and increase the page views and time on site.... Thank you for your help mate.
I read previously here that for youtube views you have to use private proxies. Anything public do not work because google bans them quickly.
Last edited by a moderator:
D
Deleted member 1013995
Guest
Why can't you message me? Send me your url and I will help you.
builder2024
Newbie
- Mar 15, 2014
- 10
- 3
I have not used BHW to post, just read, so maybe I just do not know how to send a private message. I looked, but can not find a link. Send me one and I will see if I can reply.
ANYWAY, bought this about a week ago, and like I said, its impressive in many ways, even the proxies, US,AU,CA etc. are pretty solid. Plus unlike other SEO software, this one is not a memory or CPU hog.
So buyers if your like me and you only want traffic to your website to increase page views and decrease bounce times I finally figured out how to get this to work for me.
I look at the many of the modules to get the ideas on how to change the '2clicks' (but now mine is 4 clicks) module so it works.
The issue was this line
in the '2clicks module'
It would fire and go to the first url list, however it would not surf to the 2 url list or 3rd set of urls.
So I change that specific line to be this instead:
And that worked perfect. I hope this helps others.
ANYWAY, bought this about a week ago, and like I said, its impressive in many ways, even the proxies, US,AU,CA etc. are pretty solid. Plus unlike other SEO software, this one is not a memory or CPU hog.
So buyers if your like me and you only want traffic to your website to increase page views and decrease bounce times I finally figured out how to get this to work for me.
I look at the many of the modules to get the ideas on how to change the '2clicks' (but now mine is 4 clicks) module so it works.
The issue was this line
Code:
A("href","$var_c","Click")It would fire and go to the first url list, however it would not surf to the 2 url list or 3rd set of urls.
So I change that specific line to be this instead:
Code:
$url=get_random_line("$var_c")
navigate("$url")And that worked perfect. I hope this helps others.
builder2024
Newbie
- Mar 15, 2014
- 10
- 3
I too almost requested because no reply to my inquiry. But I am glad I did not give up. I just had to figure some things out on my own. But for anyone new, dont just test this on your important website until you see that its working for you.
Until I figured out how to get it to load 2+ urls for the same IP, I was seeing 100% bounce rate. If you get this software too, just use the code edit I posted above if you want to get more page views. As for the other modules, I have not tested any others except those that bring traffic to my test website..... Hope this helps
cosmaniac23
Newbie
- Feb 6, 2017
- 9
- 2
Hi all,
I got a question - is the following code valid? I want the bot to open "main page", stay a few seconds, visit a specific page, stay a few seconds and so on.
I only use the source and the referer field, all other fields in the mask are empty because I define the url direct in the source:
$referer=get_random_line("$var_b")
referer("$referer")
navigate("url for main page")
sleep(30)
A("href","url for sub page 1","Click")
sleep(60)
A("href","url for sub page 2","Click")
sleep(60)
A("href","url for sub page 3","Click")
I got a question - is the following code valid? I want the bot to open "main page", stay a few seconds, visit a specific page, stay a few seconds and so on.
I only use the source and the referer field, all other fields in the mask are empty because I define the url direct in the source:
$referer=get_random_line("$var_b")
referer("$referer")
navigate("url for main page")
sleep(30)
A("href","url for sub page 1","Click")
sleep(60)
A("href","url for sub page 2","Click")
sleep(60)
A("href","url for sub page 3","Click")
builder2024
Newbie
- Mar 15, 2014
- 10
- 3
Mate that was my issue. In my tests (the 2clicks module) the bot would go to the 'url for main page' but it would not go to the A("href"....) That is why I used the other code listed in my previous text. You just test the 2click module inputting everything in the tabs first and see if it goes to your subpage 1, etc. For me, it would not as the module was coded.
One suggestion, your sleep(x) times, it might be better to vary those because if you do not the time on the pages would all look very similar. For example Sleep ({25|35|45|55|65|75|85|95})
I forgot to use the quote when I replied above.
Maybe first test if you can get the 2clicks module to work as its written. If it works for you, then just test your code to see if it works.
If you are not able to get it to work either, then what you can do is use the navigate() function as I wrote about in previous post.
if your going to use a direct url as you described above.
Hope that helps?
One suggestion, your sleep(x) times, it might be better to vary those because if you do not the time on the pages would all look very similar. For example Sleep ({25|35|45|55|65|75|85|95})
I forgot to use the quote when I replied above.
Maybe first test if you can get the 2clicks module to work as its written. If it works for you, then just test your code to see if it works.
If you are not able to get it to work either, then what you can do is use the navigate() function as I wrote about in previous post.
Code:
navigate("the url")Hope that helps?
Last edited by a moderator:
- Status