Scrapebox Slow Poster REAAALLLLLY SLOOOOOOOOOW

SuperBlackHat

SuperBlackHat

Power Member
Joined
Feb 2, 2009
Messages
578
Reaction score
117
Is it normal for the slow poster to move as slow as it does? I have about 12,000 blogs to slow post, ive been running slow poster for about 10 hrs now straight, and i only have 250 blogs submitted in that timeframe. This CANT BE NORMAL. Someone please let me know if im wrong or not.
 
Advertise on BHW
slow poster is slow, but not THAT slow, are you using shared proxies or private? running latest version?
It normally takes maximum 35 seconds before it times out for each blog. Do you get a lot of timeouts? If the blog is found it will most of the times only take 4-5 seconds.
 
Turn off the delay on the main GUI next to "Test Comments", if that's actually off then try going to Help >> Reset All Settings because something is messed up.

As ozzke mentioned it usually takes 4-5 seconds for a successful post, so about 10-15 per minute on the slow commenter.
 
yea im using the latest version as of yesterday, 1.56.

Delay was always off. Im getting a good amount of timeouts, and im using paid shared proxies (proxygo to be more specific)

I havent done much extra to the program but install all the addons. ill still try resetting the settings and see if anything changes.
 
Myself I find that no proxy at all is best for posting. But I have a dynamic IP and if my IP gets banned somewhere I just reset my router and I'm good.

For scrapebox I only slow post for blogengine, and I only do that when I am damn sure that the blog has good PR and is open for comments. Usually 200 or less in a single run. For Wordpress and Moveable type alike, reposting to the failed blogs using the fast poster is good enough. Slow means slow after all.
 
I just got this error message after my computer crashed with the blue screen while trying to use the slow poster:

Code: 
a problem has been detected and windows has been shut down to prevent 
damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this Stop error screen, restart your computer. 
If this screen appears again, follow these steps: 

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer 
for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. 
Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode 
to remove or disable components, restart your computer, press F8 to select Advanced Startup 
Options, and then select Safe Mode. 

Technical Information: 

*** STOP: 0x000000A (0xE1793B46, 0x0000001C, 0x00000000, 0x805021DE

Beginning Dump of physical memory
Physical Memory Dump Complete.
Contact your system administrator or technical support group for further asssistance.

Im about to totally forget about slow posting altogether as its turning out to be more of a problem than a solution
 
Last edited:
Solution: Throw away your PC. loool Dead Blue Screen.
 
Seems like a driver/hardware issue...

Solution: lookup the error code, fix it, format

12,000 blogs with shared slow proxies gonna take quite some time, but when only 250 shows as submitted, there's something definately something wrong.

Test Scrapebox on another computer
 
SuperBlackHat said:
I just got this error message after my computer crashed with the blue screen while trying to use the slow poster:

Code: 
a problem has been detected and windows has been shut down to prevent 
damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this Stop error screen, restart your computer. 
If this screen appears again, follow these steps: 

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer 
for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. 
Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode 
to remove or disable components, restart your computer, press F8 to select Advanced Startup 
Options, and then select Safe Mode. 

Technical Information: 

*** STOP: 0x000000A (0xE1793B46, 0x0000001C, 0x00000000, 0x805021DE

Beginning Dump of physical memory
Physical Memory Dump Complete.
Contact your system administrator or technical support group for further asssistance.

Im about to totally forget about slow posting altogether as its turning out to be more of a problem than a solution
Click to expand...

ScrapeBox is a userland Ring3 app, it cannot do what you say. Your problem is hardware or something with a bad driver, if you upload the dump file i'll tell you what program/driver really caused your BSOD.
 
Even though the driver my be specific to that users local computer, would you mind posting it here to give those of us working on other memory issues a new direction to start looking into.
 
Advertise on BHW
You must log in or register to reply here.
Sign up now!

Main Menu

Home Main Forum List Black Hat SEO White Hat SEO BHW Newbie Guide Blogging Black Hat Tools Social Media Downloads

Marketplace

Account Selling Content / Copywriting EBooks / Methods Hosting Misc Proxies For Sale SEO - Link building SEO - Packages Social Media Social Media - Panels Web Design More

Making Money

Affiliate Programs Hire a Freelancer IM Journeys Making Money Pay Per Click Site Flipping Want to Buy

BlackHat World

Dispute Resolution Forum Suggestions & Feedback Introductions Lounge
Back
Top