Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
1) When you are creating a Task using the Wizard if you create several emails, check the boxes next to the emails, and it will create a set of accounts for each email address (use proxies.)

2) When you get to the section to select sites to create accounts note there are small check boxes at the bottom of the window. You can deselect to post. It will create the profiles and check/confirm emails. When you do want to post you can untick the other options and check post.

3) That URL thing is not for links in articles. I looks like it is for bookmarking sites, or sites that require you have a url. You can put something different, i.e. aol.com, etc if you don't want to create links. I'm not sure if that is even used at all?


2yk0thk.jpg

Ok..as you can tell in the graphic above, I have "Check emails " and "submit" unchecked yet, when I choose the sites to create accounts on, then attempt to click SAVE at the bottom, I still get the error that URLs cannot be empty..

What URLs?

Honestly.. whoever's touting this software as the next best thing since sliced bread has either just downloaded it and not used it, to say the least.
There's no way anyone could be using this to create accounts etc... this tool is just NOT user friendly and lacks simple steps.. even when you look at some of the tasks... there's no clear way to navigate to create accounts without coming up with errors.

Stay Well Clear away from this tool... it No Workie!!
 
On the "Links" tab just put an anchor and a url (use bogus url if you want), then make sure you have the box to insert links in articles unchecked. You will then be able to save the project.

View attachment 76213

Ok..as you can tell in the graphic above, I have "Check emails " and "submit" unchecked yet, when I choose the sites to create accounts on, then attempt to click SAVE at the bottom, I still get the error that URLs cannot be empty..

What URLs?

Honestly.. whoever's touting this software as the next best thing since sliced bread has either just downloaded it and not used it, to say the least.
There's no way anyone could be using this to create accounts etc... this tool is just NOT user friendly and lacks simple steps.. even when you look at some of the tasks... there's no clear way to navigate to create accounts without coming up with errors.

Stay Well Clear away from this tool... it No Workie!!
 
Ok.. So I finally managed to get this software to register some accounts.. thanks in large part to Hubba for his relentless advise.

My observation, not opinions..
1. During the account creation phase, the software went to market super fast, even though I had 5 threads selected and am using private proxies..
As I was manually filling out captcha.. a few screens were quiz based, like select which images have lakes, grass on them etc.. you know, the type of questions to prove you're human etc. (4x4 (16 boxes))

I could not verify these, regardless of how many times I attempted clicking on the images. Not sure if this is software related or captcha related, but it was frustrating to see that I could not verify on these.

2. My local IP got flagged a few times, kept getting popup warnings about my computer sending automated queries etc, despite using private proxies... strange.. I would attribute this to the software.. I think they need to relook the option for proxies etc.

Would ideally love to see an option to throttle this tool from creating accounts rapidly like that, perhaps an option to create one account, then pause for a predetermined time..
I see there's an option for email verification to be throttled at 120 sec intervals etc.. would be great to see something like this for account creation... don't see the rush in creating accounts that one can use over and over.

Thanks
 
Hi,

When you are manually solving those image norecaptcha you have to type the corresponding image number separated by commas. The number starts with 1 in the upper left then goes left to right on down, so the images may be 1,5,10, etc. Then you click the "send" button.

In the proxies section make sure you have the box ticked to use proxies.

You can increase the email checking interval by clicking on the 120 and typing in a longer interval.

I agree it would be nice if there could be more randomization. Today I was seeing errors of "only one site can be created in 24 hours". This was on a small run using private, dedicated proxies, so don't know what happened there.

I'm not getting great success rates, but the developer does update frequently. Hopefully, the success rate will increase on the next update.

Ok.. So I finally managed to get this software to register some accounts.. thanks in large part to Hubba for his relentless advise.

My observation, not opinions..
1. During the account creation phase, the software went to market super fast, even though I had 5 threads selected and am using private proxies..
As I was manually filling out captcha.. a few screens were quiz based, like select which images have lakes, grass on them etc.. you know, the type of questions to prove you're human etc. (4x4 (16 boxes))

I could not verify these, regardless of how many times I attempted clicking on the images. Not sure if this is software related or captcha related, but it was frustrating to see that I could not verify on these.

2. My local IP got flagged a few times, kept getting popup warnings about my computer sending automated queries etc, despite using private proxies... strange.. I would attribute this to the software.. I think they need to relook the option for proxies etc.

Would ideally love to see an option to throttle this tool from creating accounts rapidly like that, perhaps an option to create one account, then pause for a predetermined time..
I see there's an option for email verification to be throttled at 120 sec intervals etc.. would be great to see something like this for account creation... don't see the rush in creating accounts that one can use over and over.

Thanks
 
first of all, thank you @Hubba for the great support you offered.

@buddieluv - yes, the emails are created using a different set of info (is not using the profile date). It was like that before, but for technical reasons and better success rate, we have changed to what is now.
The creation of a task is done very easy, in just a few steps, by following the wizard. You create a new profile/use an existing profile, create a new sub data/use an existing subdata, create the emails/import a list of email, add link/anchors to be used and this is all.

You do not have to run all steps in the same time. If you want to submit to a later time, just untick the submission step. You can schedule the application to submit to a desired time (after days, weeks, etc).
The links/anchors are only needed on the sites where a link must be bookmarked. Else they will not be used (in the case you didn't selected for the application to automatically insert links for you).

Anyway, the app is made to be easy to use, but in the same time you have the option to fine tune the behavior. I only got positive reviews of how easy to use is the app.

Please check the docs here: http://www.turboware.net/docs/ you will find some info there.

If you need more support, please add me on skype and I will guide you were needed.

Regards,
Marius.
 
02/15/16 Application version v2.52, DB Update v153:
- [Improved] GMX email account creator: now the spam filter is disabled automatically.
- [Removed] Laposte email account creator (usually not working with proxies and no disabled spam filter).
- [Improved] Increased timeout for the email scripts.
 
That was a good review.

I have one sort of stupid question.

Does this create accounts on the blog platforms and then distribute or does it automate everything after you have created the accounts. (I have to go to each account individually to set up the theme, bios, etc. but full-auto can make tier 2 and 3 much easier to handle)
Does it have any limit on the number of accounts per month (like FCS Networker) or is it 19 dollars and "as many submits as you want but try not to hurt yourself"
 
This was a reply to a post above. I deleted the text because it was answered in a later post by djp3k05. I wish I knew how to completely erase these so I didn't waste space.
 
Last edited:
That was a good review.

I have one sort of stupid question.

Does this create accounts on the blog platforms and then distribute or does it automate everything after you have created the accounts. (I have to go to each account individually to set up the theme, bios, etc. but full-auto can make tier 2 and 3 much easier to handle)
Does it have any limit on the number of accounts per month (like FCS Networker) or is it 19 dollars and "as many submits as you want but try not to hurt yourself"

Hi,

The application does everything for you, were possible. It selects a random theme, set the headline, etc (were possible). Also you can create x tiers for every task you select to do that.

There are no limitations as is a standalone application. Is exactly like you said: "do as many submits as you want but try not to hurt yourself"

Thanks.
 
Hi, all!
I'm looking for good Links.

Please, send me oportunites which you have in PM.

If anyone have a good solution for me - send PM.
Will discuss this.
Thanks!
 
I only wanted to create 3 properties so I chose manual captcha solving for the NoRecaptcha sites. When the screen showed up to select the images with street signs, I couldn't click them, I could only type. Is this not a feature?
 
I only wanted to create 3 properties so I chose manual captcha solving for the NoRecaptcha sites. When the screen showed up to select the images with street signs, I couldn't click them, I could only type. Is this not a feature?

It says in the window title that you have to write the answer, separated by commas. Here is more info about noRecaptcha: http://www.turboware.net/docs/manual-norecaptcha-solving/

do you have current promotion for life time license?
Cheers!

Yes, the $99 only for BHW members.
 
02/16/16 DB Update v154:
- [Improved] Various fixes and improvements for: Travellerspoint, Soup, Postbit, Indyarocks, Deviantart, Brownpapertickets, Blogigo.
- [Improved] Some tweeks to noRecaptcha code.

02/17/16 DB Update v155:
- [Fixed] Email verification step for: Spinchat, Bravenet and Devianart
- [Improved] GMX code to disable the spam filter.
 
Please delete. Why is there no delete button in edit?
I went with a PM because it related to support. I didn't want it to look like the software has problems if the problem is me.
 
Last edited:
02/21/16 DB Update v156:
- [Improved] Various fixes and improvements for: Postbit, Jigsy, Hazblog, Dailystrength, Carepages, Bravenet, Blogster.
- [Removed] Clickforu template(website has an issue with the login process, it will be added back if they will fix the issue).

02/21/16 DB Update v157:
- [Improved] Various fixes and improvements for: Travellerspoint, Soup, Purevolume.
- [Fixed] Tumblr login step to work with latest site changes.
 
02/22/16 DB Update v158:
- [Improved] GMX and Inboxlv email creators.
- [Fixed] Tumblr and Wordpress registration step to work with latest site changes.
 
Status
Not open for further replies.
Back
Top