Permanently Closed Marketplace Sales Thread

[fsatark]

In FF you need to make sure that you have proxies being used for all services as some websites (Google included) will use https rather than http so if you don't have it set to use proxies on all services it won't use proxies when browsing Google.

Yes it works as you describe! I change my settings on FF and now it works fine!

There is another issue, an idea about a small improvement, i already send a message but i receive no comment and i notice that there was no change on latest update.
I wonder if it possible to add a "clear results" function.
I expalin: for my projects i need 10-20 proxies and then i will need again more after 1 or 2 hours. Since there is no way to clear the first results, the only way to get only the 10-20 fresh proxies i need is to close NHP and then restart.
If you can add this "clear results" function, i will clear the old results, i will run once again NHP, stop it after i get the results i like and just stop NHP from searching for proxies.

 

[mrmac]

Cheers - all is working well now - regards!

 

[jimbobo2779]

Yes it works as you describe! I change my settings on FF and now it works fine!

There is another issue, an idea about a small improvement, i already send a message but i receive no comment and i notice that there was no change on latest update.
I wonder if it possible to add a "clear results" function.
I expalin: for my projects i need 10-20 proxies and then i will need again more after 1 or 2 hours. Since there is no way to clear the first results, the only way to get only the 10-20 fresh proxies i need is to close NHP and then restart.
If you can add this "clear results" function, i will clear the old results, i will run once again NHP, stop it after i get the results i like and just stop NHP from searching for proxies.

I will be posting some updates as of next week and I imagine this will be one of the earlier updates.

Cheers - all is working well now - regards!

Good stuff, thanks for letting me know.

 

[Monie]

Hello, I just tried two other proxy scraping softwares namely: Dexter Proxy and Proxy Multiply.

The problem with both of them is that I have to manually export the proxy list and load them up into GSA and/or Scrapebox, and by the time I do that, most of the proxies have stopped working!

Is it possible with No Hands Proxies to dynamically scrape new proxy lists and load them into GSA automatically?

If it's possible, how exactly to do it? Is it somehow done via FTP or something? Please elaborate!

 

[Seljo]

Hello, I just tried two other proxy scraping softwares namely: Dexter Proxy and Proxy Multiply.

The problem with both of them is that I have to manually export the proxy list and load them up into GSA and/or Scrapebox, and by the time I do that, most of the proxies have stopped working!

Is it possible with No Hands Proxies to dynamically scrape new proxy lists and load them into GSA automatically?

If it's possible, how exactly to do it? Is it somehow done via FTP or something? Please elaborate!

Yes its possible! You have a video tutorial for it. Its not difficult to set it up.

 

[MeshO]

How much for 100 proxies?

 

[STONESEO]

i want to use this proxies to upload videos on youtube...

the video sizes is like 9 mb each video....

how good are this proxies to do this???

 

[jimbobo2779]

Hello, I just tried two other proxy scraping softwares namely: Dexter Proxy and Proxy Multiply.

The problem with both of them is that I have to manually export the proxy list and load them up into GSA and/or Scrapebox, and by the time I do that, most of the proxies have stopped working!

Is it possible with No Hands Proxies to dynamically scrape new proxy lists and load them into GSA automatically?

If it's possible, how exactly to do it? Is it somehow done via FTP or something? Please elaborate!

As Seljo pointed out it is very possible and easy to do. There is a video on how to harvest and output Google passed proxies here and a video on how to get and import proxies to GSA here. The way No Hands Proxies harvests, checks and outputs proxies makes it by far the most efficient tool at getting usable working proxies for use with any tool that relies on proxies for searching Google.

How much for 100 proxies?

I'm sorry but I don't sell or rent proxies, No Hands Proxies is a software for finding your own proxies for any use. The one time only purchase allows you to find proxies for as long as you need them.

i want to use this proxies to upload videos on youtube...

the video sizes is like 9 mb each video....

how good are this proxies to do this???

Now that I could not comment on because I haven't tested it and it will vary depending on the proxy being used. I do know from experience that there are lots of proxies (probably in the hundreds) that are usable for days so some will definitely be usable for that purpose but the amount and percentage of usable proxies for that purpose will vary from day to day.

 

[Monie]

Hi. Downloaded NHP trial and testing it out.

What are the recommended settings for posting using GSA Search Engine Ranker for POSTING? I know private proxies are recommended for this, but I read in one of the reviews that someone got 45 LpM using NHP.

So what settings to use? Anonymous Google-passed proxies only? At these settings I'm getting less than five proxies at any time.

Also one question: if the entire point of using proxies is to hide your IP, what's the use of transparent proxies? Isn't your IP visible anyway?

 

[Monie]

OK I ran NHP for two whole hours and it has found around 20 anonymous google passed proxies, which I guess is really good for GSA posting. Let's see how many anon proxies it can gather after running for 24 hours!

I guess the proxies are truly "no hands" proxies.

 

[jimbobo2779]

Hi. Downloaded NHP trial and testing it out.

What are the recommended settings for posting using GSA Search Engine Ranker for POSTING? I know private proxies are recommended for this, but I read in one of the reviews that someone got 45 LpM using NHP.

So what settings to use? Anonymous Google-passed proxies only? At these settings I'm getting less than five proxies at any time.

Also one question: if the entire point of using proxies is to hide your IP, what's the use of transparent proxies? Isn't your IP visible anyway?

OK I ran NHP for two whole hours and it has found around 20 anonymous google passed proxies, which I guess is really good for GSA posting. Let's see how many anon proxies it can gather after running for 24 hours!

I guess the proxies are truly "no hands" proxies.

Anon proxies are generally only needed for posting as some sites may do more in depth checks to find your actual IP address rather than just checking the IP of the incoming connection. When finding proxies for searching you do not want to limit by anonymity at all, it will just lower the amount of proxies you get and the SEs do not care if the proxy is transparent or anon. I cannot stress enough to everyone that you do not want or need to limit by anonymity with searching proxies.

If you are looking to use these proxies for searching and posting in GSA I think you will have to limit yourself to anon google proxies which is a shame, I could be wrong but I don't think you can import proxies from 2 separate files (1 for searching and 1 for posting) like you can in No Hands SEO so you may have to continue limiting to Anon Google to use for both searching and posting.

If you are just using for posting you don't need to limit to Google passed at all, just Anon.

Also After 2 hours you should have more than 20 anon Google proxies, after running for around an hour I have 71. That is probably because I do not limit all proxies by anon, I just limit the proxies that I output to anon (and Google). This means that NHP will be going off and finding more proxies based on the whole list of proxies and then only outputting the proxies you want. This always tends to get much more proxies overall. You can simply disable the current output job and add another one with the Google and anon options and then remove the Anon limit in the proxy testing settings.

If any of the above is unclear just let me know.

 

[Monie]

Thanks so much for the detailed reply. It's a pity that GSA can't use separate proxy lists for searching and posting, but I'm guessing the feature shouldn't be hard to implement. I will post in the GSA forums and see if there is a reply from the developers.

i have just disabled Google checking in the proxy testing settings. Let's see how it goes.

 

[Monie]

I have opened a feature request thread in the GSA forums: http://forum.gsa-online.de/discussi...eparate-files-for-searching-and-posting?new=1 for getting separate proxy list for searching and posting from separate files.

Everyone, please go there and support this feature request!

 

[jimbobo2779]

Thanks so much for the detailed reply. It's a pity that GSA can't use separate proxy lists for searching and posting, but I'm guessing the feature shouldn't be hard to implement. I will post in the GSA forums and see if there is a reply from the developers.

i have just disabled Google checking in the proxy testing settings. Let's see how it goes.

I don't know for a fact that it isn't possible but after looking on numerous occasions I just couldn't see how to do it, just setting it up to load from a file is a bit of a pain tbh.

Either way, if you have removed the Google check in the Proxy Testing Settings you will also need to add a different output job that does not limit by Google passed proxies as you are not testing for Google none of the proxies will be tested as Google passed therefore none will be output.

 

[angzecheng8]

I have to say No Hands Proxies is the best proxy scrapper tool I ever used!

I can scrap 200 google passed proxies at any time, and hit 18,000 Link/minute with Gscraper.

My settings:
NHS, Thread: 100, auto output proxies: every 1 minutes, auto check proxies: every 10minutes. Gscraper auto input proxies every 3 minutes.

Well done definitely No Hands Proxies!



PS: I have no way affiliated with No Hands Proxies, just my true testimonial.

 

[jimbobo2779]

After looking again it appears it may be possible to do this in GSA. You can setup a job and enter in one proxy file as a site to be scraped and set it as a private proxy list and use these for posting and then also add another proxy file as a different site and not flag this as private proxy list.

I think then GSA will load these in to the separate lists and you will be able to designate private proxies for posting and public for searching.

Don't forget to disable all other proxy sites in the list though otherwise you will have GSA wasting time searching for and checking proxies.

I could be wrong in the above but that would appear how it could be done. I would be interested to see if this is how it could be done as I may do a video on it as it is not an obvious way of doing things.

 

[jimbobo2779]

I have to say No Hands Proxies is the best proxy scrapper tool I ever used!

I can scrap 200 google passed proxies at any time, and hit 18,000 Link/minute with Gscraper.

My settings:
NHS, Thread: 100, auto output proxies: every 1 minutes, auto check proxies: every 10minutes. Gscraper auto input proxies every 3 minutes.

Well done definitely No Hands Proxies!

View attachment 52848

PS: I have no way affiliated with No Hands Proxies, just my true testimonial.

Thanks a lot for the testimonial, it is great that people are starting to see how awesome No Hands Proxies really is.

 

[angzecheng8]

Let me try it later and revert if this is workable...

After looking again it appears it may be possible to do this in GSA. You can setup a job and enter in one proxy file as a site to be scraped and set it as a private proxy list and use these for posting and then also add another proxy file as a different site and not flag this as private proxy list.

I think then GSA will load these in to the separate lists and you will be able to designate private proxies for posting and public for searching.

Don't forget to disable all other proxy sites in the list though otherwise you will have GSA wasting time searching for and checking proxies.

I could be wrong in the above but that would appear how it could be done. I would be interested to see if this is how it could be done as I may do a video on it as it is not an obvious way of doing things.

 

[Monie]

I don't know for a fact that it isn't possible but after looking on numerous occasions I just couldn't see how to do it, just setting it up to load from a file is a bit of a pain tbh.Either way, if you have removed the Google check in the Proxy Testing Settings you will also need to add a different output job that does not limit by Google passed proxies as you are not testing for Google none of the proxies will be tested as Google passed therefore none will be output.

Yes I had that problem. So I set up another output job without the Google check and loads of proxies were outputted.But I don't know how many of these proxies are actually google passed? If I use this in GSA won't GSA waste time trying to search using proxies that are not Google-passed?So what you meant was you got 71 anon proxies, but you didn't know how many of them were Google-passed?

 

[jimbobo2779]

Yes I had that problem. So I set up another output job without the Google check and loads of proxies were outputted.But I don't know how many of these proxies are actually google passed? If I use this in GSA won't GSA waste time trying to search using proxies that are not Google-passed?So what you meant was you got 71 anon proxies, but you didn't know how many of them were Google-passed?

No, I got 71 Anon Google passed proxies.

I set it to check google in the proxy testing settings and left the min anonymity at transparent then in the output options checked to only output google passed and limited by Anon (in the output settings). That resulted in 71 Anon Google passed proxies.