Permanently Closed Marketplace Sales Thread

[MrPartridge]

all of these are answered in the thread and also in the manual. I know because I had all the same questions when I started and it greatly benefited me to read the thread.

Are they? Ok then either I have missed them or didn't think they have been answered properly, or even perhaps and as grateful as I am for the personal opinion of the individual who contributed would still like to know Jays view and what his approach to this is, whichever is the case I still don't think it is that unreasonable to ask him. If some of you even though you know the answer want to play the game of that has already been covered on page 17 post 763 and have got the hump with me for asking too many what you consider to be stupid questions then fine, don't tell me, like I say I have not paid you $127-147 and you are in under no obligation to offer support or advise me in any way what so ever. However and Jay has not responded concerning these last few posts yet, but when he does I have faith that he will be the bigger man and think yeah maybe that point has been covered somewhere, maybe the guy is a bit of a newbie pain in the ass, but we were all there at one stage and he has bought my product, it will only take a minute to say what my approach is at present, so what the heck in the interests of good customer service and good customer relations, I will put him out of his misery and anybody else who has either missed it or not properly understood, rather than be bloody minded and think no to make a point I am not going to tell you and going to make you read the whole thirty pages again, (as others have been so keen to point out I have procrastinated enough), I think his customer service is better than that.

Jay I eagerly await your response.

Many thanks and sorry again for this causing any friction it really is not my intention.

 

[erroronline14]

Ok so I have read every post in this thread and through the manual a couple of times and the only questions I still have not answered are these, I know there are perhaps no definitive answers to these questions, but if you could just tell me what you do Jay that would be a great help.

Ill answer this one but my method changes every time because we always do experiments and adjust the figures based on our conclusions. I suggest you do the same because twitter is constantly changing things especially to their rules about suspending accounts. You may lose some accounts in the process but its all part of the game.

Here is what I do right now.

* What is the minimum delay in seconds you use for following?

Im using the default delays. 1-5 seconds

* How many followers do you aim for before you start sending out links?

I actually answered this many times. This depends on the method, if you are into sending massive @reply\mention messages, Im not monitoring the number of followers, anything more than 0 is fine with me. Im more concern with the age of the account. Im making sure that the accounts are at least 1 week old before I start sending.

* How many tweets without links do you make before you start sending out links?

I love playing around with this one. If I have 1000 tweets I add around 400 tweets with no links (which makes it 1400 in total), they will get suspended for some time but I dont really care about accounts. If you want a safe figure, for every 1000, make 50% of it have no links.

* Are the tweets without links @mention\@reply messages?

No, they are just tweets copied from other users. Im using the reply generator to search #quote or anything then copy them.

* Do you do a mix of @mention and @reply, what percentage mix?

Please refer above.

* And I am still not quite sure on this, do you send the same spun message from more than one of your accounts as long as it's to different users? Is that what you do Jay, or do you send a uniquely spun message from each of your accounts even if it's for the same promotion?

Im doing it. What I do is,

1. I use only one account to scrape all followers of my target
2. Generate spun reply messages to all users.
3. Add filler tweets (no links)
4. Send them all to tweets poster
5. Shuffle them
6. Save to multiple files
7. Open multi user tweet poster
8. Load accounts and assign all text files to each account
9. Then post

Many many many thanks again to Jay and everyone who has contributed (I have added my thanks to your posts) and sorry for bugging you with noob like questions. Once I have this last lot of questions answered I think I am probably done for now and ready to go into battle.

Its okay to ask but Its always better to find answers for yourself, what work for me may not work for others because of other circumstances that we cannot identify yet and the rule always change.

Thanks..

Good luck

 

[alphad0g]

nm, fixed.

 

[Sylas]

Hi guys

Pretty much got my mind set up on buying the Tweet Attacks Account Creator. 2 questions:

1. I've been hearing a lot of bad stuff lately about automated account creation. Apparently 99% of accounts created using software are getting banned hence the lack of sellers at the moment. Can anyone give me their experiences using the Account Creator since the Twitter changes?

2. Is there a special discount price for BHW members who have not bought the Tweet Attacks software?

 

[MrPartridge]

First of all can I just praise Jay on his support, he really does make the effort. I will start my campaigns and begin my learning on the job and I appreciate it's a game that's constantly changing, I also appreciate there is an element of subjectivity and that all our experiences can vary.

I love playing around with this one. If I have 1000 tweets I add around 400 tweets with no links (which makes it 1400 in total), they will get suspended for some time but I don't really care about accounts. If you want a safe figure, for every 1000, make 50% of it have no links.

Please excuse my ignorance but isn't that just telling me what percentage to mix without link tweets with link tweets, rather than how many without link tweets to send out before I start to do this, I read you should send a certain amount out first without any links what so ever i.e. not a 50/50 mix.

Sorry maybe it's just my lack of understanding but would it be possible to choose one out of these two options, i.e. either:

1. No you don't need to send out any tweets without links first, a mix of 50/50 both with and without links is fine from the start.

Or

2. Yes you should send out this many tweets without links first, before you start sending out the 50/50 mix.

Im doing it. What I do is,

1. I use only one account to scrape all followers of my target
2. Generate spun reply messages to all users.
3. Add filler tweets (no links)
4. Send them all to tweets poster
5. Shuffle them
6. Save to multiple files
7. Open multi user tweet poster
8. Load accounts and assign all text files to each account
9. Then post

Thanks for sharing that method. So is the same spun message getting sent from more than one of your accounts, if so roughly how many? Again I am really looking for either:

1. Every one of my accounts sends out its own uniquely spun message.

Or

2. The same spun message does get sent from more than one of my accounts, I send the same spun message from roughly this many of my accounts.


My apologies for not really understanding your answers and for being a little perplexed, which is probably why I thought the question had not been answered to begin with, would it at all be possible to pick either option 1 or 2 from each of the possible answers and include the relevant figure where necessary?

Many many thanks

 

[myloveistwitter]

Hi.
When i want using "wait and reply" module for tv keyword
do not posted none tweets.
please view picture:

 

[erroronline14]

Hi.
When i want using "wait and reply" module for tv keyword
do not posted none tweets.
please view picture:

Please check your filtering, most probably all of tweets are not posted via web thats why they are all ignored because the Reply only on tweets posted from web was checked.

 

[abernok]

Please check your filtering, most probably all of tweets are not posted via web thats why they are all ignored because the Reply only on tweets posted from web was checked.

I am getting same problem with default options, i think twitter doing some protections.

please help.

 

[erroronline14]

Im using it now with the default settings and found no problem. Its all about the filtering why its ignoring users, it maybe because there is no default picture, tweet contains link, you already replied that person before etc.

I am getting same problem with default options, i think twitter doing some protections.

please help.

 

[vasilicaciortan]

Does Tweetattacks have a account creator yet? If not what are you all using to create accounts?

There is a separate program. It is called Tweet Attacks Account Creator.

 

[TheMasterOfMoney]

Where do you find the tweet attacks account creator?

You can buy it just if you have TweetAttacks Pro.

 

[myloveistwitter]

Hi.
When i want using "wait and reply" module for tv keyword
do not posted none tweets.
please view picture:

with all of method(filter or none filter) for sending tweet not worked.
and for following members not worked.

 

[abernok]

Im using it now with the default settings and found no problem. Its all about the filtering why its ignoring users, it maybe because there is no default picture, tweet contains link, you already replied that person before etc.

No, i mean its showing replied but there is no reply.

 

[Dadelius]

@Erroronline14

I'm not sure how the program goes about unfollowing people, but I have 15,000 followers to go through, and it seems that it has to go through the first 10,000 people before it reaches a point where it starts unfollowing. Normally wouldn't care, but after about 20 or 30 minutes before it even reaches that point I get a fail whale and it has to start the process all over again. Is there a way to have it "remember" where it left of and go from there?

 

[erroronline14]

@Erroronline14

I'm not sure how the program goes about unfollowing people, but I have 15,000 followers to go through, and it seems that it has to go through the first 10,000 people before it reaches a point where it starts unfollowing. Normally wouldn't care, but after about 20 or 30 minutes before it even reaches that point I get a fail whale and it has to start the process all over again. Is there a way to have it "remember" where it left of and go from there?

Did you manually stopped it when the fail whale showed up? Because its should continue where it stop after around 1.5 minutes.

No, i mean its showing replied but there is no reply.

I think this is a very isolated case then, kindly post to the support forum so we can discuss it better.

 

[Dadelius]

No, I just notice that the whale pic is up and hit the unfollow button again.
Sometimes when I check it's just sitting there, like it stopped for some reason and forgot to start again. (Unless everyone left on my list IS actually following me. LOL)

 

[erroronline14]

Hehe it starts again because you hit the unfollow button, but it should normally continue where it stopped, there is a timer showed on the left side to show when it will continue the tasks which normally 1.5 minutes.

No, I just notice that the whale pic is up and hit the unfollow button again.
Sometimes when I check it's just sitting there, like it stopped for some reason and forgot to start again. (Unless everyone left on my list IS actually following me. LOL)

 

[Dadelius]

No timer for me, just stops. here's a screenshot

http://www.freeimagehosting.net/image.php?59d899b1a4.jpg

 

[Albert]

I just bought Tweet Attacker AC and it is simply awesome.

One thing I found weird is that it somehow can't change the profile image of the accounts. It would say, image.jpg cannot be found even though I tried many file destinations that had jpg images in them. Is this a bug or am I doing something wrong? Any input would be great!

Also, another one of my questions is that when using the Multi Poster, does it login to each account individually in threads and use the assigned proxy if assigned?

Thanks!

 

[Sylas]

I just bought Tweet Attacker AC and it is simply awesome.

One thing I found weird is that it somehow can't change the profile image of the accounts. It would say, image.jpg cannot be found even though I tried many file destinations that had jpg images in them. Is this a bug or am I doing something wrong? Any input would be great!

Also, another one of my questions is that when using the Multi Poster, does it login to each account individually in threads and use the assigned proxy if assigned?

Thanks!

Having the exact same problem with AC.