[method] To Seek, Spin, and Supply, the INFINITE ARTICLE in 5 steps or more

Deleted member 855230 · Dec 12, 2017

This method was originally a submission for the hunger games contest in the Jr. VIP section. I asked that it was moved down to the regular area after the competition, because I feel it could be used to help people with building fully fleshed out sites on web 2.0's or PBN sites. These types of sites are almost always neglected, where the content seems to be particularly thin or poor quality. However, when done properly, these properties can be developed with very high quality, in order to help fool anyone doing manual reviews.

But, it doesn't stop with your own properties. This can also be used to spam requests for guest blog posts, article submissions, PDF documents with affiliate links, scripts to read for unique youtube narration, and much more*. This method is not for the meager, as it is taxing mentally. However, it is something when done right, can pay you back for your time invested, many many times over.

*More is to be defined as = Use your damned imagination you fool!

DISCLAIMER: I HAVE NO AFFILIATION WITH ANY OF THE TOOLS I USE IN THIS POST

Table of Contents
Part 1 – Theory aka Fluff

Setting the Mood with a Romantic Story

The Concept of the Infinite Article and Why it Exists

Why Do We Need an Infinite Article?

Part 2 – Creation aka Spin

Seeking Out High Quality Original Articles

Creating The Block Spinning Parameters

Manually Spinning for Maximum Readability

Part 3 - Stuff

Bonus Area

In Conclusion

Deleted member 855230 · Dec 12, 2017

Part 1 – Theory

This is for the Who, What, Where, When, and Why.

1. Setting the Mood, with a Romantic Story

Most of us here in Jr VIP are serious about our online money making ventures. Nearly all activities deal with SEO, Branding, or Marketing. Depending on the niche, our network of backlinks will generally range from “My niche only needs a few links,” to “Shit, this actually needs a lot of links.” Not to be forgotten, for the most advanced of marketers, the “Where in hell, am I going to actually find a metric fuck ton of links,” which should be avoided by everyone. There's money to be had elsewhere, showoff.

Recently, there have been studies regarding the strength or juice, passed from certain locations of a website. Not to bore, I'll cut to the chase: the tests have shown the best links are within content. When placed in other areas of the page, a major portion of the passed on strength is lost. The weakest links are considered to be footer links. No one gives a fuck about footer links. That's for copyright shit.

So, that leaves us with content links. You know the type. Advertorial shit that recommends you following a link that has been carefully placed within the article. But we all know, content that's worth anyone's fuck, is nothing cheaper than FUCKING EXPENSIVE! So we save our money for the good articles, and generally use those on our money site.

Meanwhile, our PBN's and web 2.0 sites receive nothing but the low quality garbage that barely passes an algorithm of uniqueness. Then, we pray to various deities, that our sites are not manually reviewed. Otherwise, the shit quality of the spun articles, are usually introduced to giant ban hammers.

What's my point? We need content. We need a LOT of content. It needs to be trustworthy, and it needs to have a call to action. On our money site, the call to action is generally “buy things.” Meanwhile, on our PBN and web2.0's, the call to action, is to follow the link. It may not look like it, but that's because of the garbage stuff that is generally used. It doesn't have to be this way.

Deleted member 855230 · Dec 12, 2017

2. The Concept of the Infinite Article and Why it Exists

I have developed a technique, that I like to call the “infinite article.” A few years of reading on BHW, I decided that I wanted to fast track some progress on a new project. I decided the top dog was the best choice, so I bought a package, and said goodbye to a few hundred dollars. I was not expecting the world, but I certainly wasn't expecting the 100% spun garbage that was now associated with a money site. I quietly cursed the project, and decided I would figure out my own way.

What I would need to do, is find an article worth a shit, and then spin it. The problem was that spinners usually create garbage sentences. Even the “worlds best, blah blah” fuck 'em all! There's nothing that can replace a human brain's comprehension of a language. So I manually wrote {every|all|each} of the spintax words. This took a long ass time, but I was able to choose each word that was spun, and make sure that they would always work in that specific sentence.

It was good, but it wasn't great yet. Coincidentally, just when I was finished with spintaxing this 1,000 word document, I stumbled across an ingenious piece of software. Autofill Magic. It has all sorts of features, and I'll talk about a few of them later. The one that is really impressive, is the “block spinning.” This is the coolest fucking spinner in the world. It spins paragraphs, sentences, and multiple levels of spintax.

Why do we give a fuck? Because there is also an option to have a random range of paragraphs within the article. This means, you can have anywhere from 1 to a fuck load of them. The paragraphs are supposed to be written with the idea that they are independent of each other. That way, if some of the paragraphs are not included within the article, it isn't a broken article. This is easy to think of, with the article topic as the silo niche for smaller paragraph topics.

The best part, there is an option to keep the first paragraph, or the last paragraph, independently of each other. This means we are able to create an introduction and closing, while keeping the articles random. I generally will start my articles with a summary of the general niche, and the last article as a summary closer with my link.

Deleted member 855230 · Dec 12, 2017

3. Why Do We Need an Infinite Article?

Well, no one needs anything but food, air and water. Here are three things most people don’t need:

No one “needs” an article that is grammatically correct.
No one “needs” quality articles on their tier properties.
No one “needs” to have fires all around their campsite, capable of cooking monies.

Having an article that spins grammatically correct, and is sourced from quality, will give you the capability to monetize your tiers as well. You can put adsense, or amazon affiliate links even. There is also the added bonus of not having to worry about hiding from robots. Your tiers at this point, will be highly niche relevant.

Having this type of infinite article, can help you flip the concept of a PBN upside down. Don’t use a bunch of hidden sites that are only used for their value of a couple of links to one site. Instead, you can put advertising on them, like normal sites do, such as amazon, adsense, or ogads. I'll mention a few distribution ideas later, in the … distribution section.

But more than just for PBN, this can be used incredibly well, for ORM. Build up twenty, thirty, or fifty properties. Because they're quality, you can literally SATURATE your client's search results with articles, nearly guaranteeing anything that is negative, hangs out somewhere in page 3, 4, or 5 even!

Just as capable, this is also great for running local SEO campaigns. You can create favorable content that is all over your local area. Restaurant B, C, D, through Z, won’t know where the FUCK Restaurant A came from, and they sure as fuck won’t be able to keep up! With hundreds of articles and reviews, popping up, they're sure to sit on top.

Deleted member 855230 · Dec 12, 2017

Part 2 – Creation

Finally, the part where you can copy/paste what I'm doing. Well, not exactly. But it is something you can easily teach your VA.

4. Seeking Out High Quality Original Articles

I have a few places that I like to go, in order to search for inspiration when I'm writing articles. None work better than Ahrefs. You don’t need a paying membership, but I'm not sure if you can do it without being logged in. That's something for you to figure out your damned self. I'm feeding you, but not with a spoon.

We're going to be using Ahrefs Content Explorer. It is pretty freaking awesome. They only show results of articles. And you can sort by word count. This is important, because we are looking for long articles which usually have a ton of information.

I've highlighted the click points on where to navigate to do some content curation, as I am too much of a fucking n00b to do a screen capture video. At least I know how to edit pictures. Follow the red highlighted boxes.

Once you have found a decent article with plenty of great information, I suggest you break it down into little chunks. The absolute best articles for poaching, are list articles. Each number is generally a short and sweet snippet of information that is independent of each item on that list. Perfect!

Let's use an example from the results. Neil Patel's “12 Risky SEO Tactics That Might Work.” His stuff is pretty wordy, so it works well to be spun, but bad for an example for us. I scrolled all the way down to #9 for the topic of article spinning!

Note: I hate the way he uses one sentence per paragraph, so I condensed all of the single sentences into logical paragraphs. Paragraphs aren’t supposed to be lists. Wow I just used paragraph a lot. PARAGRAPH! Okay, I’m done using the word paragraph. Once more? No? Okay, back to the example...

9. Article spinning

Why it’s risky: This tactic comes close to violating Google’s duplicate content rules. You’re essentially taking one article and changing it just enough to make it “different.” This usually means using lots of synonyms, rephrasing sentences, and changing some formatting around.

Why it works: You can get more life out of one article, and you can get your articles out on different sites to get more backlinks. How to do it: You can manually spin articles, or you can use a program like The Best Spinner. Whatever you use, make sure your first spun article reads very differently from the original. Here are some tips to keep in mind:

Change important phrases

Use different headings

Format things differently (e.g., use a bullet point list instead of a numbered list)

And make sure all of your spun articles read differently from each other.

Each chunk of info, or bullet point, should be edited independently. This keeps you in the mind frame that they are all individual topics that can be added or removed from the original article without destroying the point.

Deleted member 855230 · Dec 12, 2017

5. Creating The Block Spinning Parameters

The end program to be used will be Autofill Magic, for its unique ability to do “block spinning.” It is best to prepare your article for block spinning before adding spintax. It will help minimize confusion when structuring your article. Familiarize yourself with how to format block spinning, with Autofill Magic’s tutorial, linked here. http://autofillmagic.com/tutorials/block-spinning-step-by-step/

The first thing I like to do, is take a chunk of info from the list article, and bring it over to notepad.

Isolate all of the sentences to a single line, with extra space between each. You’ll need to simply rewrite each sentence to say the same thing.

I’m going to show you what Neil Patel’s chunk of info would look like, block spun. I’ve kept the original sentences in, so you can see what I rewrote and where, however, those need to GTFO for the actual article to spit out correctly.

I’ll requote the original at the bottom, as well as the final spun, so you can see the difference.

Code:

(Article spinning)
#block#
#p#
#s#
Spinning articles and not getting caught
How to spin an article successfully
Black hat techniques for article spinning
Getting away with article spinning
Tactical tips for article spinning
#/p#

(Why it’s risky:)
#p#
#s#
What makes it blackhat:
Where it gets close to crossing the line:
These are the risks involved:
Why its a gamble:
#/p#

(This tactic comes close to violating Google’s duplicate content rules. )
#p#   
#s#
Google has a strict policy against duplicate content.
Methods like this can get Google's attention, because of their rules against copied content.
Copying content is a violation of Google's policies, in regards to duplicating content.

(You’re essentially taking one article and changing it just enough to make it “different.”)
#s#
Basically you are simply changing words to make the article barely different.
The words can be replaced with similar words to change the article until it is unique.
All you are doing is mixing things up to make the article just different enough from the original.
(This usually means using lots of synonyms, rephrasing sentences, and changing some formatting around.)
#s#
Generally the words will be replaced with synonyms, and maybe phrases can be swapped around.
Formats can be manipulated, words swapped, and things phrased differently.
Spinning similar phrases to be changed, synonyms used in place of key words, and different sentences to say the same thing.
#/p#


(Why it works: You can get more life out of one article, and you can get your articles out on different sites to get more backlinks.)
#p#   
Why does spinning work? Because you can use the same article again, and submit them to other pages, to build more links!
What's the point of spinning? Not having to write a new article to keep talking about the same topic, and you can put it all over the internet to place links to your sites.
Why should you spin articles? To squeeze more content out of the same topic, to distribute everywhere you can, and to get links pointing to your site.
#/p#

(How to do it: You can manually spin articles, or you can use a program like The Best Spinner.)
#p#
#s#
How do you spin an article? You can rewrite an article manually, changing a few things here and there, or there are automatic spinners that can spin for you, like The Best Spinner.
A couple of ways to spin an article: Manual labor, by reading and changing the article by hand, or go find some good software to do it, like The Best Spinner.
How to spin that article: Go and rewrite things by hand as you read through the article, and rephrase as you go, or try out a few different software solutions that can do it all in a couple of clicks, like The Best Spinner.
(Whatever you use, make sure your first spun article reads very differently from the original. Here are some tips to keep in mind:)
#s#

Regardless of what you do to spin the article, read both of them, to make sure they are different from eachother! A couple tips to remember:
No matter how you go about making an article that has been spun, proofread so you dont have two articles that are still the same! Keep these tips close, for when you spin:
However you choose to spin your articles, dont forget to check them to see if they are reading different from the source copy. Use these tips for reference:
#/p#

(Change important phrases)
#p#   
#s#
Make sure you modify key phrases within the content.
Don't forget to manipulate some of the more interesting ideas and phrases.
Always change the wording of important ideas and phrases.

(Use different headings)
#s#
Change the heading styles, from H2 to H3 or vice versa.
Make your headings sizes that weren't used before.
Always remember to use unique heading sizes.

(Format things differently (e.g., use a bullet point list instead of a numbered list))
#s#
Make sure your formats are different, such as if you use a bulleted list instead of numbers.
Do things different, such as text fonts, styles, lists and other formatting. Use numbers instead of bullets, or nothing at all.
Different formats should always be used, especially things like lists. Use letters instead of bullets, or numbers even.

(And make sure all of your spun articles read differently from each other.)
#s#
Proofread all the articles you spin. They should read differently.
The resulting spun articles should be unique, so make sure.
Each article that gets spun needs to be read to ensure it's unique and reads different from the others.
#/p#
#/block#

Block spin results, followed by original quote.

Tactical tips for article spinning

Why its a gamble:

Copying content is a violation of Google's policies, in regards to duplicating content. Basically you are simply changing words to make the article barely different. Spinning similar phrases to be changed, synonyms used in place of key words, and different sentences to say the same thing.

What's the point of spinning? Not having to write a new article to keep talking about the same topic, and you can put it all over the internet to place links to your sites.

A couple of ways to spin an article: Manual labor, by reading and changing the article by hand, or go find some good software to do it, like The Best Spinner. No matter how you go about making an article that has been spun, proofread so you dont have two articles that are still the same! Keep these tips close, for when you spin:

Always change the wording of important ideas and phrases. Always remember to use unique heading sizes. Make sure your formats are different, such as if you use a bulleted list instead of numbers. Each article that gets spun needs to be read to ensure it's unique and reads different from the others.

Article spinning

Why it’s risky: This tactic comes close to violating Google’s duplicate content rules. You’re essentially taking one article and changing it just enough to make it “different.” This usually means using lots of synonyms, rephrasing sentences, and changing some formatting around.

Why it works: You can get more life out of one article, and you can get your articles out on different sites to get more backlinks. How to do it: You can manually spin articles, or you can use a program like The Best Spinner. Whatever you use, make sure your first spun article reads very differently from the original. Here are some tips to keep in mind:

Change important phrases
Use different headings
Format things differently (e.g., use a bullet point list instead of a numbered list)
And make sure all of your spun articles read differently from each other.

This spits out a relatively small amount of text, for the size of work that is put in. Keep in mind, this is what each “isolated” section would look like. You can include an infinite amount, but a good number is 10! It’ll take you all day, but it’s like a fountain of youth. The article is brand new, every time! So, imagine what you would pay, and remember that every time you spin. Speaking of spinning, next we’ll look at adding spintax.

Deleted member 855230 · Dec 12, 2017

6. Manually Spinning for Maximum Readability

You’ve already completed the difficult part of structuring the blocks to choose from multiple sentences, paragraphs, and everything is perfectly readable and makes great sense. What comes next is what allows you to make this article infinite. Adding relevant spintax. And to do that, I’m sharing with you an awesome website that I recently stumbled across. It is very easy to use. http://ezarticlelink.com/articlespinner/free.php

Without any further waiting, lets get started: Copy and paste your block spun article into the top field on the website. Then click the small button on the upper right, that says “Launch Assisted Spin Editor.” You’ll have either a pop-up, or new tab, where you’ll be doing all of your work.

Automatically, starting from the top, each word is selected within your text. Below it are suggestions, where you select your spintax! It’s incredibly easy to use also. Left click adds spintax. Right click goes to the next word that is spinable. My suggestion is to load just chunks at a time, otherwise you can be overwhelmed when stuffing a 5,000 word block spun article in there.

Using AFM again, it will spit out content that is high quality, every time. Here’s one last example.

Black hat tips for well written article spinning

These are generally the issues incorporated:

Because google has a stern rule against duplicate material. The wording could very well be replaced with very similar keywords to alter the informative article until it certainly is original. Generally the words will be replaced with synonyms, and maybe phrases can be swapped around.

Why should you spin articles? To squeeze more content out of the same topic, to distribute everywhere you can, and to get links pointing to your site.

A couple of ways to spin an article: Manual labor, by reading and changing the article by hand, or go find some good software to do it, like The Best Spinner. Regardless of what you do to spin the article, read both of them, to make sure they are different from eachother! A couple tips to remember:

Make sure you modify key phrases within the content. Change the heading styles, from H2 to H3 or vice versa. Make sure your formats are different, such as if you use a bulleted list instead of numbers. The resulting spun articles should be unique, so make sure.

Deleted member 855230 · Dec 12, 2017

Bonus Area:

A place to find a large amount of high quality niche articles, ready to be rewritten. CPA sites like clickbank often have vendors who are wanting to set up their affiliates for success. Obviously not all of them are as amazing as the top dogs, so you may not be able to find a vendor who provides this for you:

A resource bank full of articles for you to rewrite! They’re all in the same niche, and cover very similar topics. Not only are they great for a rewrite, but you can steal the article and support your own stuff! Dog obedience articles meant for buying a training course? Instead, send them to amazon to buy dog toys and treats!

Deleted member 855230 · Dec 12, 2017

In conclusion

Article spinning is nothing new to us, but block spinning might be. This incredibly powerful combo, can be used for filling up all kinds of content driven SEO strategies. The list is far longer than below, but I’m sure you guys are sick of my yapping by now.

Tiered Links
PBNs
Web 2.0s
Local SEO Campaigns
Online Reputation Management Campaigns

One last thing: If a moderator approves this, I would like to authorize this to be taught to your VA’s. This is a fucking tedious process, let your grunts do the hard stuff!

X · Dec 12, 2017

Shut up and take my likes (or thanks, whatever).

Awesome write up. Very entertaining and, more importantly, very useful. I've had Autofill Magic for a while now, and saw some potential in block spinning, but you've given me the kick in the ass I needed to actually start utilizing it.

Well done, hat's off to you sir.

Deleted member 855230 · Dec 12, 2017

Finally, something to make a fucking table of contents for! I've actually been putting off a lot of paying content to write this thing. I'm sure the pictures are all over the place, but I only had a few seconds to make 8 posts, and link them up, and add pictures, all without an admin

BassTrackerBoats · Dec 12, 2017

Stupid strong share.

One last thing: If a moderator approves this, I would like to authorize this to be taught to your VA’s. This is a fucking tedious process, let your grunts do the hard stuff!

Nothing in the Jr Vip zone is permitted to be shared outside the Jr Vip zone but I would suggest that after the Hunger Games are complete we move it to the main forums if that is OK by you, @SensualTyrannosaurus.

That way you give the Jr Vip crowd an excellent share, have an opportunity to participate in the HGs with this thread and then give the masses the opportunity to train their VAs or even just work the process themselves.

I'll leave that call up to you as to moving it after all is said and done though.

Deleted member 855230 · Dec 12, 2017

BassTrackerBoats said:
Stupid strong share.

Nothing in the Jr Vip zone is permitted to be shared outside the Jr Vip zone but I would suggest that after the Hunger Games are complete we move it to the main forums if that is OK by you, @SensualTyrannosaurus.

That way you give the Jr Vip crowd an excellent share, have an opportunity to participate in the HGs with this thread and then give the masses the opportunity to train their VAs or even just work the process themselves.

I'll leave that call up to you as to moving it after all is said and done though.

Yeah, we can definitely move it. It's not anything that can be saturated, but as you said, it's an entry for me to go back to trollin...I mean an entry for the hunger games! The only icing on the cake, would be if we had more time... I'd spin this thread and submit it 20 times! Hahahaha...

(looking as the ban hammer swings... "but it was all highly unique and grammatically correccc....." Connection lost)

mindmaster · Dec 12, 2017

Nice share.
I use to do that sometimes, as it takes a lot of time. However I just put the paragraphs into spintax format and the results are similar.
Ex. {paragraph 1 goes here|paragraph 2 goes here|paragraph 3 goes here| this is empty | this is empty (just a space) }
And so on.
The paragraphs are spinned already. Sometimes I do the same for some sentences.

This way I can use this with any linkbuilding software.

Deleted member 855230 · Dec 12, 2017

mindmaster said:
Nice share.
I use to do that sometimes, as it takes a lot of time. However I just put the paragraphs into spintax format and the results are similar.
Ex. {paragraph 1 goes here|paragraph 2 goes here|paragraph 3 goes here| this is empty | this is empty (just a space) }
And so on.
The paragraphs are spinned already. Sometimes I do the same for some sentences.

This way I can use this with any linkbuilding software.

Yes this is also a good point. And depending on the software, you can sometimes nest multiple levels of spintax to get very confusing! The landing page of the site I linked will spin the text that it produces as well.

ScribScribScrib · Dec 12, 2017

so the larger the article we are spinning, the more unique articles we can create, i got this right, right?

this reminds me of my guide on unique amazon books, nice new line of thinking you got me into

Deleted member 855230 · Dec 12, 2017

ScribScribScrib said:
so the larger the article we are spinning, the more unique articles we can create, i got this right, right?

this reminds me of my guide on unique amazon books, nice new line of thinking you got me into

Yes, and the cool part about AFM, when you have a huge article, you have more options for random size. The first one I did was almost 6,500 words before spintax. I was able to do anywhere from 3-17 blocks randomly with that text file, at 275 words up to 2,400 words. I’ve since modified it to where it’s down to 1,600 max, as a couple blocks were too redundant.

ScribScribScrib · Dec 12, 2017

SensualTyrannosaurus said:
Yes, and the cool part about AFM, when you have a huge article, you have more options for random size. The first one I did was almost 6,500 words before spintax. I was able to do anywhere from 3-17 blocks randomly with that text file, at 275 words up to 2,400 words. I’ve since modified it to where it’s down to 1,600 max, as a couple blocks were too redundant.

this is definitely a job for the vas but who the hell is gonna prevent them from just running away with the idea, gotta find those with more brawn than brains

Deleted member 855230 · Dec 12, 2017

ScribScribScrib said:
this is definitely a job for the vas but who the hell is gonna prevent them from just running away with the idea, gotta find those with more brawn than brains

Let them run with it. Saturation is impossible with this. They would still need a high quality source for the original article!

Fragmaster · Dec 12, 2017

Wow @SensualTyrannosaurus, great job! I'm content amateur, and can't wait to dive into this.

[method] To Seek, Spin, and Supply, the INFINITE ARTICLE in 5 steps or more

Deleted member 855230

Guest

Deleted member 855230

Guest

Deleted member 855230

Guest

Deleted member 855230

Guest

Deleted member 855230

Guest

Deleted member 855230

Guest

Deleted member 855230

Guest

Deleted member 855230

Guest

Deleted member 855230

Guest

X

Elite Member

Deleted member 855230

Guest

BassTrackerBoats

Support Admin

Deleted member 855230

Guest

mindmaster

Elite Member

Deleted member 855230

Guest

ScribScribScrib

Elite Member

Deleted member 855230

Guest

ScribScribScrib

Elite Member

Deleted member 855230

Guest

Fragmaster

Senior Member

Main Menu

Marketplace

Making Money

BlackHat World