How can I use GSA strongly ?


Check my last comments in this post, they are one of the worst list providers I ever used.

1 Stronger link Better than 1000 links ! but how i can use it like that ?

You don't get strong domains from lists as so many people are posting to them they usually go over their bandwidth/storage allocation and end up going offline or rolled back before they can pass link juice. I made this post about getting higher quality targets for SER a while back but it is an expensive process so I dropped using it.

It might be an idea to read this post I made on another thread a few weeks back. IMO the days of ranking with mass automation and auto generated content are gone. I was talking to a SER user a few days back who said he was seeing positive results from using SER as a T2 for his PBN but he never targeted a money page with just PBN links to compare performance. IMO the SERP movement he is seeing is coming from his PBN, not the SER links.

can i ask? is that GSA platform identifier good for scraping list?

It depending on the volume of link acquisition you are doing and the targets you provided it with. SER is able to do a bunch of the stuff PI can but it locks SER up and takes its resources slowing down LPM so I preffered to use PI to keep SER going fast. I published this set of posts on how you are able to scrape your own lists that may help you out.

you should ask @Shaunm.

Thanks for the tag :).

Yeah but when you scrape then won't 90% of the results be the same as in the lists anyway?

Yes and no, there are two ways to acquire your initial links. In my experience, if you use link extraction then you will be picking up a whole bunch of targets that are currently in premium lists. To some extent the same goes for scraping with the default footprints that come with SER. If you build out your own set of custom footprints then you have a better chance of picking up domains that are not on the lists and are also of a higher quality.

I have been toying with the idea of running my lists through GSA PI in the new year to separate the domains that I have found via custom footprints and use them to manually post T1 links to.

Because these guys say they use a half dozen servers to scrap 24/7 and keep testing the lists on GSA too.

BST sellers can put all sorts of crap in their sales threads to try and get sales. Take this BST for example, it says the content is Dylan Thomas approved but he died in 1953 so no idea how he is approving the content. After the Fred rollout a bunch of BSTs were putting stuff like "Smashs Fred" in their thread titles without posting any proof within their threads at all.

I posted this over a year back in a list sellers BST thread as they were selling a dead list. This post is from another member a few month back in a different thread and it seems they have not cleaned their act up, you can also scroll up in this very thread to see aidenhera opinion on the same list seller.

I suspect there would also be more negative feedback from them but when I ticketed them for a refund they said "In this case it will go slower if you post things publically" due to me making the post linked above. Basically trying to keep me money for as long as possible, perhaps indefinitely if I kept posting the truth about them publicly.

1hWt3iA
 
Check my last comments in this post, they are one of the worst list providers I ever used.



You don't get strong domains from lists as so many people are posting to them they usually go over their bandwidth/storage allocation and end up going offline or rolled back before they can pass link juice. I made http://shaunmarrs.com/?s=quality%20target&utm_source=blackhatworld.com a while back but it is an expensive process so I dropped using it.

It might be an idea to read https://www.blackhatworld.com/seo/please-share-working-case-with-rankerx-and-gsa.985815/#post-10551635 I made on another thread a few weeks back. IMO the days of ranking with mass automation and auto generated content are gone. I was talking to a SER user a few days back who said he was seeing positive results from using SER as a T2 for his PBN but he never targeted a money page with just PBN links to compare performance. IMO the SERP movement he is seeing is coming from his PBN, not the SER links.



It depending on the volume of link acquisition you are doing and the targets you provided it with. SER is able to do a bunch of the stuff PI can but it locks SER up and takes its resources slowing down LPM so I preffered to use PI to keep SER going fast. I published http://shaunmarrs.com/category/tutorials/ultimateguides/ultimateguidetoaalist/ that may help you out.



Thanks for the tag :).



Yes and no, there are two ways to acquire your initial links. In my experience, if you use link extraction then you will be picking up a whole bunch of targets that are currently in premium lists. To some extent the same goes for scraping with the default footprints that come with SER. If you build out your own set of custom footprints then you have a better chance of picking up domains that are not on the lists and are also of a higher quality.

I have been toying with the idea of running my lists through GSA PI in the new year to separate the domains that I have found via custom footprints and use them to manually post T1 links to.



BST sellers can put all sorts of crap in their sales threads to try and get sales. https://www.blackhatworld.com/seo/sudoranks-articles-dylan-thomas-approved.729114/, it says the content is Dylan Thomas approved but he died in 1953 so no idea how he is approving the content. After the Fred rollout a bunch of BSTs were putting stuff like "Smashs Fred" ihttps://www.blackhatworld.com/seo/bhw-marketplace-is-full-of-trolls-n-shills.941190/page-3#post-10058226 within their threads at all.

I posted https://www.blackhatworld.com/seo/daily-updated-link-lists-by-serocket-gsa-scrapebox-verified-link-list.782243/page-21#post-8770986 in a list sellers BST thread as they were selling a dead list. https://www.blackhatworld.com/seo/best-gsa-ser-verified-list-provider.931391/#post-9945740 is from another member a few month back in a different thread and it seems they have not cleaned their act up, you can also scroll up in this very thread to see aidenhera opinion on the same list seller.

I suspect there would also be more negative feedback from them but when I ticketed them for a refund they said "In this case it will go slower if you post things publically" due to me making the post linked above. Basically trying to keep me money for as long as possible, perhaps indefinitely if I kept posting the truth about them publicly.

1hWt3iA

Yeah I have 1GB of various lists or more (after removing duplicates in Scrapebox. otherwise could be maybe 10gb lol) I downloaded a lot of them from at least 4 providers. They all are extreme low quality, I wouldnt use them for free If I knew about how bad they are.

As I said is something like 90% dead/not matching footprint pages, then the rest 10% might work but its spammed to death.

With one scrape you can get better results than with using 50 lists with from couple list providers.

Its typical in SEO industry to scam SEOers unfortunately :-( but good thing is that your competition wont have good lists. They have to scrape them on their own
 
Little off topic - I was using GSA 3 yrs before to direct spam french MS movies downloads and streaming long tails,worked fabulously, and i heard from experience that for international long tails still there is a bunch of zones,especially daily trending stuff like music albums,movies,games - basically niches where viral tendencies are expected - churn and burn still work.Will test it soon enough..

@shaun - what do you think about autoapprovemarketplace com - GSA SER Verified Lists for 2017?
 
With one scrape you can get better results than with using 50 lists with from couple list providers.

Good effort man, I never managed anything close to that with a single scrape before, even with custom footprints.

@shaun - what do you think about autoapprovemarketplace com - GSA SER Verified Lists for 2017?

Out of all the ones I have tried its the only one that I kept using over the years. I stopped using SER on my projects a few weeks, maybe months back now using bridge network based stuff and stopped using lists and mass automation a few months before that.

If you do want to go ahead and try that list out you can save an extra 10% on list price on my Joint Venture page on Looplines website.
 
Just scrape your own lists. Find some descent 2.0s to build whatever content on and then test. That's be best way to find out. Test different anchor percentages, different link types, velocity, etc.
 
Back
Top