Permanently Closed Marketplace Sales Thread

[eriquen2]

I am getting 95% of
"Posted unsuccessful blog comment to:"
and just 5% from successful what I am doing wrong?

 

[swheat]

Would you recommend using the NHSEO proxy harvester or stick with the dedicated proxies I have for posting and PG outputting Anonymous proxies to search with?

NHSEO is running fine for me so I dont think there is a need for me to enable the NHSEO proxy harvester?

 

[jimbobo2779]

I am getting 95% of
"Posted unsuccessful blog comment to:"
and just 5% from successful what I am doing wrong?

I would say this is either due to bad proxies or the result of an incredibly short test run. When the posting starts the fastest results to come in are the fails as they take far less time to complete as a successful post involves loading the page, detecting form type, posting (another page load) and if successful a link check (another page load).

Would you recommend using the NHSEO proxy harvester or stick with the dedicated proxies I have for posting and PG outputting Anonymous proxies to search with?

NHSEO is running fine for me so I dont think there is a need for me to enable the NHSEO proxy harvester?

If you already have private proxies and/or use proxy goblin or some other proxy harvester I would advise keep using what is working for you. Using the NHSEO will limit the amount of time posting due to the added time harvesting and checking proxies, realistically over time the amount of time spent harvesting proxies is reduced as some working proxies from the previous harvest will still work (generally finding 20 working proxies will take less than a minute after the first couple of harvests.

 

[nowhere22]

i have 1 profile running since yesterday, after couple of hours it started searching for new blogs and the results are 0 trackbacks 0 blogs, i dunno what i am doing wrong but it cant find blogs to post.

yes i added keywords around 20

 

[jimbobo2779]

i have 1 profile running since yesterday, after couple of hours it started searching for new blogs and the results are 0 trackbacks 0 blogs, i dunno what i am doing wrong but it cant find blogs to post.

yes i added keywords around 20

It would actually ru without keywords just fine. If you are running without any proxies for searching you will need to go and enable the proxy harvester in the Settings=>Proxy tab.

To enable the proxy harvester just check "Use Proxies" in the searching proxies control group and the "Use Proxy Harvester" options, the default settings should be fine.

 

[nowhere22]

i use private proxies and still nothing;/

 

[jimbobo2779]

i use private proxies and still nothing;/

Please give me more information, these tiny lil bits of info do not really help. Using 1 private proxy is about as useful as using no proxies, using 10 private proxies but running 10 searching threads is also the same and will result in the IPs getting temp. limited.

Please let me know how many proxies, how many searching threads and any other information you can about your proxy and threads settings and anything that could help me to give an answer. Without any info I am just guessing.

 

[johncardme]

Basically, I'll order IM software or any other virtual item for you. The price is from 30% to 50%. I will card the software for you.

Almost all software is available. I currently have 8 Zennoposter Pro license and 3 HMA Pro VPN license.

Turnaround time is between 15 minutes to 8 hours.

Payment is through Liberty Reserve or Paypal. Payment is after delivery.

skype john.carder5

 

[Francois73]

Hi Jimbobo

I would like to handle some of my profiles on a other PC.
How to work with the database?
Only import on the second pc and delete the profiles that I don't need ?

Other question : can I use NHSEO without KW ?

Thanks
Francois

 

[kromme]

So many reply's. Perhaps i missed some! So many technical questions but can someone tell some results?? Higher in Google? More websitehits?

Thank you!!

 

[ramen noodles]

Okay, I did the version upgrade and turned on the proxy harvester. I created a profile around 1pm today and let it run. It's almost 10pm now and I only have 1 confirmed link.

Honestly, the older version seemed to work much better.

 

[jimbobo2779]

Hi Jimbobo

I would like to handle some of my profiles on a other PC.
How to work with the database?
Only import on the second pc and delete the profiles that I don't need ?

Other question : can I use NHSEO without KW ?

No Hands SEO does not need keywords to be entered to run, it will collect and run with trending keywords if no keywords are entered.

To transfer a select few profiles from one computer to another you will need to copy the DB file and remove the profiles you do not want yes.

So many reply's. Perhaps i missed some! So many technical questions but can someone tell some results?? Higher in Google? More websitehits?

Thank you!!

There are far too many for me to point out. All testimonials on the website and in the sales thread are 100% genuine and accurate, there are many threads on this forum (and others) stating how the tool works and is incredibly easy to use. Before a lot of the major improvements to NHSEO a user even managed to get to #1 in Google with nothing other than No Hands SEO

Okay, I did the version upgrade and turned on the proxy harvester. I created a profile around 1pm today and let it run. It's almost 10pm now and I only have 1 confirmed link.

Honestly, the older version seemed to work much better.

In that case you more than likely have an issue with yoru settings. If you want to give me some idea of how you have your settings I will be able to help. For instance, what do you have your allowed searching threads set at? How many proxies are you searching for? What does the log say? Do you have PR limit or OBL limit set? What are your profiles setup like?

I have spent hours trying to help users in the past only to find out their anchor text was about 200 characters long so please give me as much information as possible, if there is stuff you don't wanna post in here then send me a PM.

 

[ramen noodles]

In that case you more than likely have an issue with your settings. If you want to give me some idea of how you have your settings I will be able to help. For instance, what do you have your allowed searching threads set at? How many proxies are you searching for? What does the log say? Do you have PR limit or OBL limit set? What are your profiles setup like?

I have spent hours trying to help users in the past only to find out their anchor text was about 200 characters long so please give me as much information as possible, if there is stuff you don't wanna post in here then send me a PM.

Well, I left all of the settings at the default when I created my profile. So, whatever the default is...that's what I've been using. It worked fine before the recent updates. My anchor text is very small. I'm only using four two-word keywords.

Allowed searching threads = 1
Max threads = 15
Min PR = 0
OBL = 0

Proxy stuff
Load from file delay = 900,000
Proxy harvesting delay = 900,000
Stop harvesting at = 20


Just as a suggestion, if these default settings are not the best for optimal NHSEO performance, maybe you could change them in the next update so that non-technical users (like me) would have an easier time. This could also mean less tech support required from you.

Maybe it has something to do with the proxy setting. On the proxy page I have "use proxies" checked, "continually update proxy profiles" checked, and "use proxy harvester" checked. Am I supposed to uncheck the "use proxies" box if I'm using the harvester?

 

[Psychobilly1]

I'm having the same problem. The log shows it searching and checking for proxies and that's all it does.

I've tried with private proxies, without proxies and get no results.

I've not been been able to use NHSEO for some time now.

 

[ramen noodles]

I've not been been able to use NHSEO for some time now.

Yeah, same here.

 

[jimbobo2779]

Well, I left all of the settings at the default when I created my profile. So, whatever the default is...that's what I've been using. It worked fine before the recent updates. My anchor text is very small. I'm only using four two-word keywords.

Allowed searching threads = 1
Max threads = 15
Min PR = 0
OBL = 0

Proxy stuff
Load from file delay = 900,000
Proxy harvesting delay = 900,000
Stop harvesting at = 20


Just as a suggestion, if these default settings are not the best for optimal NHSEO performance, maybe you could change them in the next update so that non-technical users (like me) would have an easier time. This could also mean less tech support required from you.

Maybe it has something to do with the proxy setting. On the proxy page I have "use proxies" checked, "continually update proxy profiles" checked, and "use proxy harvester" checked. Am I supposed to uncheck the "use proxies" box if I'm using the harvester?

The default settings are what the majority of users will need already so they shouldn't need changing, your settings are inline with what I would expect for an "average user" also so they all look fine. To be honest it is exactly the settings i have a test system setup with.

The only thing that makes me wonder if it could be the issue is you having it set to continually load proxies from file, unless you are loading a continually updated (via third party tool) file of proxies this should not be selected.

Are you using proxies for posting? If so are they public or private, public should never be used for posting as it results very poor results as even successfull posts can not be checked properly. Are you just using the harvested proxies from NHSEO for searching or are you using proxies from another source?

What was happening in the log? Most problems can be figured out from the log so if you could PM or email me what was happening in the log when you stopped the posting, was the last entry to the log a long time in the past?

 

[jimbobo2779]

I'm having the same problem. The log shows it searching and checking for proxies and that's all it does.

I've tried with private proxies, without proxies and get no results.

I've not been been able to use NHSEO for some time now.

I wouldn't say this is the same thing. How long are you giving it to search for proxies before giving up? Searching for proxies on first startup can take anywhere from 3-15minutes (or more if very few threads are being used) but subsequent searches will take far less time (on my VPS running at 25 threads subsequent proxy searching takes approx 1minute).

If you are running with private proxies you should NOT be seeing any sort of proxy searching, if you are then simply turn it off in the settings tab.

 

[sullamulla]

I get a blank GUI as informed to Jim... I haven't been able to use this software for the last three weeks - Jim did try to help by suggesting a team viewer set up but I refused this option.... now I am stuck with an unuseable piece of software until a solution can be found on this thread soon I hope... anyone else having the same issues as me?

 

[DuttyRock]

Hey, do you have a guide on how to use your program? i like what im reading but too many people having issues on proper configuration.

 

[googlemonster]

I get a blank GUI as informed to Jim... I haven't been able to use this software for the last three weeks - Jim did try to help by suggesting a team viewer set up but I refused this option.... now I am stuck with an unuseable piece of software until a solution can be found on this thread soon I hope... anyone else having the same issues as me?

Well what did you refuse it for you daft wazzock, is your desktop full of masturbationary material?