Permanently Closed Marketplace Sales Thread

[theindiaphile]

Hey Ubertoolz appears to be down... is there any issue with the server?

 

[jascoken]

After some messages with Getwhatchuwant and bigeazy, I decided to sign up.

Looks promising...signing up now

Thanks Guys! Welcome aboard... I know you won't be disappointed!

Hey Ubertoolz appears to be down... is there any issue with the server?

Last night between 6:30pm-2am GMT, our data centre was hit by a massive orchestrated DDOS attack; plus South London had a Power Grid failure to top it off! Because of the multiple issues, it knocked the centre hard for 8 hours, but they're fully recovered now. Sorry; there was absolutely nothing that could be done inside that short time-frame.

J

 

[Lebron2727]

this software looks like the stuff I need, I am still not sure which one I prefer, this one or Seonuke...

I will buy your software for a month and try the trial of the other guys after two weeks.. I will report my findings in this thread

 

[albaniax]

Thanks Guys! Welcome aboard... I know you won't be disappointed!



Last night between 6:30pm-2am GMT, our data centre was hit by a massive orchestrated DDOS attack; plus South London had a Power Grid failure to top it off! Because of the multiple issues, it knocked the centre hard for 8 hours, but they're fully recovered now. Sorry; there was absolutely nothing that could be done inside that short time-frame.

J

Uff a Ddos? From whom and because of what?
Or just jealousy competition?

// Right now I wanted to use the 3D spinner, but it doesn't output anything. It just shows me a blank page.

What's the problem?

////** Fixed, problem from my side in the spin

@Lebron
Better go back to Seo101 You can't compare this service to SeNuke

 

[Roland32]

Signed up and am pretty blown away with all the tools in here. I have a newb question. I want to use these tools with my ALN submissions. Do I understand correctly that if I just take an article and do the html character spinning with the Title builder. i will not have to actually spin the words? Or do the actual content of the articles still need to be spun?

 

[jascoken]

this software looks like the stuff I need, I am still not sure which one I prefer, this one or Seonuke...

I will buy your software for a month and try the trial of the other guys after two weeks.. I will report my findings in this thread

@Lebron
Better go back to Seo101 You can't compare this service to SeNuke

Lebron

This toolz suite isn't in the same category as SENuke...

SENuke is a mass submission tool. UberToolz is a suite of content creation/preparation and spinning tools embedded with years of expert SEO know-how. It's designed to work alongside ALL your other tools to massively leverage your time and effectiveness, and help you avoid most of the pitfalls that Panda causes. You'll find tools in here that don't really exist anywhere else.

We designed them over the last 5 years to work WITH and support the submission toolz we use:

AMR
ZennoPoster
XRumer
etc.

...because at the end of the day, ALL of these submission tools are only as good as the data you put in them. And that's where UberToolz sits!

 

[jascoken]

Signed up and am pretty blown away with all the tools in here. I have a newb question. I want to use these tools with my ALN submissions. Do I understand correctly that if I just take an article and do the html character spinning with the Title builder. i will not have to actually spin the words? Or do the actual content of the articles still need to be spun?

Thanks Roland... Wait until you've been using them for a month and really start to understand just HOW MANY different areas they affect. I'm still amazed at how often I get a PM or email about 4-6 weeks after people start using it saying 'the light just went on!'...

HTML/Unicode character spinning isn't a replacement for normal spinning. At least, not in my eyes. I use it on top of the usual spintax to increase indexing and ensure that all submitted content gets seen as unique.

My best advice is that you get into the 'UberCubez' module and really start to understand and work that...

When you've got hyper-spun content, then use HTML/Unicode character spinning on-top to ensure non-duplication. It's very important to consider the human reader/reviewer side of spinning. Just using char spinning on it's own means that all content looks the same to a human reviewer - and you don't want that.

Char spinning is just another tool to increase the number of original premutations you can squeeze out of a set amount of content.

Also, if you're looking for a short-cut, the Splice & Spinner will take 30-50 articles and paragraph splice them together in the most effective way. You can then char-spin them to get each para unique.

Always use the title-builder to generate 100's of titles; otherwise you end up with a title footprint, even though your body content is unique.

Good luck in 2012!

 

[roknimam]

I will totally try this, after watching video I think this is one grate service, with not so much attention from the community though. I actually though its again some kind bullshit service with random tools, o boy how wrong I was.

 

[bigeazy]

I will totally try this, after watching video I think this is one grate service, with not so much attention from the community though. I actually though its again some kind bullshit service with random tools, o boy how wrong I was.

This toolset is at the backbone of my operations... when you are a serious seo, you realize the importance of efficient and accurate content production.

Using this toolset makes me so much more efficient. Its ridiculous.

 

[Getwhatchuwant]

I will totally try this, after watching video I think this is one grate service, with not so much attention from the community though. I actually though its again some kind bullshit service with random tools, o boy how wrong I was.

Definately not bullshit! Creating one great article that can be used 1000 times is not as "sexy" as being able to distribute 1000 articles with a button push! But this is really the #1 thing everyone should look into, creating the content then figuring out how to distribute it later. Its human nature putting the cart before the horse. People will buy nutritional supplaments but never join a gym or get off the couch. Same idea, create the content that will work then find ways to get it out efficiently.

 

[jascoken]

UberToolz WordPress Multi-Poster Desktop V1.0

Many of our members use our BlogPoster module to quickly add spun content to their WordPress sites...

This desktop tool is an enhanced version of that module available to PREMIUM MEMBERS ONLY.

It runs from your PC desktop and allows the selection of multiple blogs at the same time, and then posts individually spun versions to each, in either 'live' or 'draft' mode. 'Live' posts will show up immediately on the site/blog (assuming there is no caching mechanism in place) whereas 'Draft' posts will not appear until you log into the WordPress dashboard and publish it as live. This allows you to 'queue up' posts for later publishing if required.

From the users perspective, it operates in much the same way as our web-based version, and requires all WordPress blogs to be setup on our website. When you login to the desktop poster, it authorises your login credentials and downloads all the blogs that you have setup on the site.

Essentially, it provides a desktop-based multi-posting facility to the current BlogPoster module.

The software is provided as a simple ZIP file containing 7 files. It doesn't need 'installing', just unzipping, and can be copied to any normal drive/directory, including a USB key if required. Simply double-click on the 'UberToolzDesktop.exe' file in the unzipped directory to start the program.

The software can be downloaded from within the Members Area.

 

[jeancarlin]

jascoken,

Very cool product/service you have here. I have 2 suggestions to make it even more useful and would increase the value to your customers.

1. Add TOKEN support.
The idea is that using tokens, one can really increase the complexity of the content and hence minimize the footprint. I would leave it up to you to decide the best way to markup the tokens but here is the general idea.

Markup:
TOKEN,TOKENID,TOKENINDEX,data1,data2,data3,... datan.

Data:
TOKEN,1,1,Bob,Mary,Sally
TOKEN,1,2,He,Her,Her
TOKEN,1,3,Policeman,Doctor,Lawyer.
TOKEN,1,4,Uncle,Aunt,Aunt

Content:
My [TOKEN,1,4] is a [TOKEN,1,3]. [TOKEN,1,2] name is [TOKEN,1,1].

Output1:
My Uncle is a Policeman. His name is Bob.

Output2:
My Aunt is a Doctor. Her name is Mary.

Output3:
My Aunt is a Lawyer. Her name is Sally.

All you would need to do is validate each TOKENID (making sure there are matching data counts) and then randomly pick a token index and do a string replace with the same data element for the chosen token index.

The general idea is to have the ability to have referential data that can be spun and used throughout the article. At the same time, think of doing complex stuff like bolding your keyword in the first paragraph and underlining it in the last. Or vice versa or adding a picture in the first paragraph and a video in the last one, etc. The amount of variation this would allow is insane.

2. Add a range to the number of paragraphs output.
Idea is to enter 2 numbers for the total number of paragraphs (a low and a high) and the code would randomly choose one of them. That also helps improve the footprinting and make each article look even more unique.

JC.

Did you ever get a chance to look at my TOKEN suggestion? I have suggested it to TBS and one other competitor and so far none have taken it seriously.

Could you comment one way or another please?
e.g.
A) Get Lost! It's never going to happen (too complex)
B) Great idea, we shall add it to the dev pipeline
etc.

JC.

 

[Getwhatchuwant]

Awesome way to manage a wp blog network!!!

UberToolz WordPress Multi-Poster Desktop V1.0

Many of our members use our BlogPoster module to quickly add spun content to their WordPress sites...

This desktop tool is an enhanced version of that module available to PREMIUM MEMBERS ONLY.

It runs from your PC desktop and allows the selection of multiple blogs at the same time, and then posts individually spun versions to each, in either 'live' or 'draft' mode. 'Live' posts will show up immediately on the site/blog (assuming there is no caching mechanism in place) whereas 'Draft' posts will not appear until you log into the WordPress dashboard and publish it as live. This allows you to 'queue up' posts for later publishing if required.

From the users perspective, it operates in much the same way as our web-based version, and requires all WordPress blogs to be setup on our website. When you login to the desktop poster, it authorises your login credentials and downloads all the blogs that you have setup on the site.

Essentially, it provides a desktop-based multi-posting facility to the current BlogPoster module.

The software is provided as a simple ZIP file containing 7 files. It doesn't need 'installing', just unzipping, and can be copied to any normal drive/directory, including a USB key if required. Simply double-click on the 'UberToolzDesktop.exe' file in the unzipped directory to start the program.

The software can be downloaded from within the Members Area.

 

[jascoken]

Did you ever get a chance to look at my TOKEN suggestion? I have suggested it to TBS and one other competitor and so far none have taken it seriously.JC.

Token replacement is a feature that is most useful at submission for inserting different links and dynamic data. For static or standardised list data like you're suggesting it's easier to just use spintaxed content at the point of insertion.

Also, we don't produce submission software, and the token system would have to be implemented at the point of submission for it to be generally make sense. Many current power-submitters use token replacement, and our char spinner for example allows the insertion of #tokens# which do not get spun, but get left in place for the submitter token system. But we can't implement the actual token replacement when our software outputs spintax, as it would be reliant upon the submission system syntax, and only spintax is universal across all systems, which is why we output in spintax format.

In other words, your idea is far more suitable for submission systems, not what we do. We could in theory add it to the new desktop WP submitter, but we don't have any plans to, because our submitter is designed for personal sites, not for building external backlinks etc.

Awesome way to manage a wp blog network!!!

Absolutely! I've has PM's from several members who are already using it to feed content to mid-sized personal networks, in conjunction with our UberArticle content.

Also; for those that haven't noticed, we've added the option to purchase an extra 3 article credits per day (90 per month) for only $30pm for Premium members. And don't forget these can be ready auto-spintax or char-spun/Unicoded too.

 

[jascoken]

UPDATED: UberToolz WordPress Multi-Poster Desktop V1.1

Our desktop-based WordPress Multi-Poster now harvests the live permalink URL from each post (where available) into the posting log.

This provides an instant list of new URL's ready to backlink to!

Premium Members can download NOW from the Members area.

 

[jascoken]

 

[mrmidjam]

Just signed up and created my first UberCubez Construct spinner article(4 sentences each). I can really see the potential in these tools.

At the moment the copies are coming out at around 30/50% dupe content, I plan to use these on web 2.0s, haven't done any spintax yet.

Do you think I could I get away with just using the charspinner on this article or should I go a step further and spintax it also? (this would take some time as will have to be done on all sentence variations)

Cheers

 

[sackboy127]

Hi,

I'm really interested in the UberCubez multi-level spinning, and I was just wondering if there's a way to connect it with Zennoposter, beause then it'd be a really powerful linkbuilding asset.

So is there a way to for example download like 200 article variations to different .txt files?

Or to get the standard (multi-level) spintax version?

Thanks very much!

 

[Getwhatchuwant]

Just signed up and created my first UberCubez Construct spinner article(4 sentences each). I can really see the potential in these tools.

At the moment the copies are coming out at around 30/50% dupe content, I plan to use these on web 2.0s, haven't done any spintax yet.

Do you think I could I get away with just using the charspinner on this article or should I go a step further and spintax it also? (this would take some time as will have to be done on all sentence variations)

Cheers

If they are going on 2.0's at the least do a synonym level spin on it.

have taken some of the "base" constructs and sent them in to sites like articlebase etc.. without issues, that is pre and additional spinning.

I then go and spin it with the auto spin tool they have and let them fly. Every now and again I will character spin too which by default (I believe) spins for you anyway. Correct me if I am wrong.

 

[jascoken]

UPDATED: UberToolz Blog Multi-Poster Desktop V1.2

Our desktop-based Blog Multi-Poster now posts to your Tumblr.com as well as wordpress.com 2.0 sites...

Premium Members can download NOW from the Members area