GSA Website Contact - Automatically Send Your Product/Service to 1,000's of Contact Forms (Discount)

[s4nt0s]

Sometimes work, sometimes no work. And than close fast this software all information will disappear and new start to write subject and keywords again

Hmm, it shouldn't delete information when closing the software. I think a lot of your issues might be due to the public proxies you're using. (slow/unreliable) Are you able to try with some semi-dedicated or dedicated proxies? I think you will see big improvements in speed.

And the software run is very slow, one day just sent 2000 message only

You're using public proxies, right? If so, that's why its going slow for you. Public proxies are going to be slower and unreliable due to them being public and most likely used by many people.

--------------

Latest update:

1.82 - new: option to stop projects once no proxy is working

 

[JohnKowalski]

And the software run is very slow, one day just sent 2000 message only

I thought you need proxies only for scraping, are they also needed for posting to contact forms?

 

[loopline]

Sometimes work, sometimes no work. And than close fast this software all information will disappear and new start to write subject and keywords again

If its not saving info, that would tell me it can't write to the file. It writes to files all the time and on exit. Is your hard drive full?

Did you change the write permissions of the app data folder? Did you whitelist the program in all security software?

You shoould whitelist in security software and you should make sure your hard drive is not full and that you don't change write permissions of the app data folder.

Be sure to whitelist, disable security software does not solve the problem, you must whitelist or uninstall, at least generally speaking.

I thought you need proxies only for scraping, are they also needed for posting to contact forms?

You DEFINITELY NEED proxies for posting. Else is there is a complaint your ips will take it and they can cancel your internet and refuse to sell you internet. If you use proxies then the proxy takes the complaint.

 

[PandaBusters]

Well I won't ever bash another program, however I have used paigham and this for contact form posting, and others. Excluding any other program and simply comparing this to paigham, yes the end result is the same.

As for user interface, I like this product better the paigham. As for function, I have to be honest and say that I have not tossed in half a million urls yet and tested it in the mass, but in the smaller tests I have run I definitely like it better the paigham.

It is of course Exponentially cheaper, because its a lifetime license with lifetime updates. Plus its from GSA and their other stuff is solid, so I expect that this will be a investment that pays for its self hundreds of times over.

So if you are asking which you should buy, I personally would recommend this over paigham. My 2 cents.

It has everything a form poster could ask for, randomization of headers, CVS imports after WebHarvy scraping, and macros is brilliant. It will lead to more independent AI where humans and robots become indistinguishable.

Be advised there is a form mail war going on for about the last 3 months, it's going to get much worse. For years, when I registered my gmail address 5 years ago, my website forms would average one spam every two days, now it's 3-10 times a day. The 70 million of us with websites (versus 3 billion with e-mail addresses) will be overwhelmed without reprogramming your filter for black listed, white listed keywords, but also number ranges for accepting/rejecting sales' pitches. Ask me what I do.

 

[puneetas3]

Hey I have a query. Say I wanted to target sites with wordpress only, is there a setting/string to achieve that. Thanks

 

[s4nt0s]

Hey I have a query. Say I wanted to target sites with wordpress only, is there a setting/string to achieve that. Thanks

If you open a project and click the filter tab, then go to the option "website must contain" - you can try entering a string like "wp-content" which would be something that Wordpress sites have in their source. You can check the option "check on source page" as well. Using some WP related footprints for the scraping will also help.

----------

1.83 - fix: captcha setup was incorrectly saved when deleting services

 

[Deleted member 752298]

@s4nt0s hey I sent you a PM

 

[Deleted member 752298]

I just purchased the product and I have a couple of questions left:

1. Would it be possible to bulk select the search engines to use?
2. Would it be possible to 'reset' the edited fields?

 

[s4nt0s]

I just purchased the product and I have a couple of questions left:

1. Would it be possible to bulk select the search engines to use?
2. Would it be possible to 'reset' the edited fields?

1) You can bulk select search engines by right clicking in that search engine selection box > check all. However, you usually get better results by selecting a few search engines like Google, Bing, Yellowpages, etc. When you select all search engines, some are less popular and don't return that great of results so the software ends up wasting time on search engines that don't work as well. It's more efficient to select a few good search engines

2) Which fields are you wanting to reset? I'm not sure which ones you're referring to? You should be able to go in and edit the content of your message, etc.

 

[Deleted member 752298]

1) You can bulk select search engines by right clicking in that search engine selection box > check all. However, you usually get better results by selecting a few search engines like Google, Bing, Yellowpages, etc. When you select all search engines, some are less popular and don't return that great of results so the software ends up wasting time on search engines that don't work as well. It's more efficient to select a few good search engines

2) Which fields are you wanting to reset? I'm not sure which ones you're referring to? You should be able to go in and edit the content of your message, etc.

Thanks for your reply @s4nt0s,

The software is really impressive. Sending around 15k-20k messages per 2 hours.
I was wondering if you have any suggestions for advertising websites with offers?

 

[romingson]

1) You can bulk select search engines by right clicking in that search engine selection box > check all. However, you usually get better results by selecting a few search engines like Google, Bing, Yellowpages, etc. When you select all search engines, some are less popular and don't return that great of results so the software ends up wasting time on search engines that don't work as well. It's more efficient to select a few good search engines

2) Which fields are you wanting to reset? I'm not sure which ones you're referring to? You should be able to go in and edit the content of your message, etc.

Hi,r u recommend which search engine is good? Because use all search but no good result

 

[wpbacklinks]

Quick question: (apologize if it has been answered already)

1. can i import list of contact pages url directly to this software, so the software only needs to send email?
2. can i import list of website URL (homepage URL) so the software will find the contact form itself and send email?

Thanks!

 

[s4nt0s]

Thanks for your reply @s4nt0s,

The software is really impressive. Sending around 15k-20k messages per 2 hours.
I was wondering if you have any suggestions for advertising websites with offers?

The message and offer is something you're going to have to get creative with. There are a few guys here who have some nice success with their offers, but I doubt they want to share their exact methods because it can get easily abused and saturated.

You want to make your offers/messages look like they're aren't being mass sent. There are some included macros that might be able to help with that if you're creative.

Hi,r u recommend which search engine is good? Because use all search but no good result

It's best to select only a few search engines at a time. I suggest using the major search engines like Bing and Google a long with yellowpages for best results. When you select all search engines the software will spend a lot of time on parsing SE's that might not return useful results and that ends up wasting time.

Quick question: (apologize if it has been answered already)

1. can i import list of contact pages url directly to this software, so the software only needs to send email?
2. can i import list of website URL (homepage URL) so the software will find the contact form itself and send email?

Thanks!

1. Absolutely. Keep in mind its not sending emails, its submitting your message to the contact form available on the website.
2. Yep, it will automatically try to find the contact pages and submit the message to the form. (not email)

 

[s4nt0s]

Last update:

1.84 - fix: possible bug when saving data over a longer periode of time

 

[wpbacklinks]

1. Absolutely. Keep in mind its not sending emails, its submitting your message to the contact form available on the website.
2. Yep, it will automatically try to find the contact pages and submit the message to the form. (not email)

Hi,

I downloaded the trial but i have no idea how to import list of contact page URLs or website URLs and submitting message.

 

[s4nt0s]

Hi,

I downloaded the trial but i have no idea how to import list of contact page URLs or website URLs and submitting message.

You create a project like your normally would, then you right click on the project and "import URLS". From there you can click start > "check present sites" and when that's finished you can go start > "send message". If you want it to also scrape for new sites, you could do start > "scrape + check" or "scrape + check + send".

 

[ConsultJoseph]

ordered, trying it out now. The only problem is whenever I put in the name + registration key, it says I should quit the tool. Once I do and log back in, it still says unregistered no matter how many times I do it.

 

[s4nt0s]

ordered, trying it out now. The only problem is whenever I put in the name + registration key, it says I should quit the tool. Once I do and log back in, it still says unregistered no matter how many times I do it.

Thanks for ordering. Did you get this solved or still having issues? Try right clicking on the desktop icon > run as admin > enter license. License has to be entered perfectly or it wont register. Also, make sure nothing is blocking it from communicating from the licensing server. (firewall/anti-virus)

=====================

Latest update:

1.85 - fix: solverecaptcha.com service was not accessed correctly

 

[s4nt0s]

Latest update:
1.86 - new: improved baidu search engine parsing

 

[HypnoTodds]

I was wondering is this good for Money site & tier 1 content?