Xrumer help here

sevenfigurez said:
Is the following good for xrumer?
1x Intel Core 2 Quad Q9400 2.66GHz
2 GB DDR2 Memory (up to 667MHz)
1 x 250 GB 7200 RPM SATA II
2 TB/mo bandwidth
10Mbit Port Speed

Can a 10mbit speed run at 1,000 to 2,000 links a min for a linklist?
Click to expand...

I have 10mbits connection on your mentioned PC, + I have 4GB RAM and 1TB Hard drive.

There is no way to get 1000 - 2000 with 10mbits connection. At least I couldn't find the way to do it.

If you have any ideas then let me know.
And xrumer will not use much ram unless you are blasting with anti-spam method.
 
Last edited:
Advertise on BHW
Please help me regarding Xrumer and forum list and poster project.
Means I want to write a post of a topic that already exists, and where I do not wrote post.
I want to manually insert links from the forum.
For example, the theme of the forum is called "sex porno films.
url of this forum is www.forum.com / sex-porn-films

where the need to insert this url and the setup project?
 
Hello Fellow BHers,

This has become my new favorite thread.

I do have a request, there have been two different ebooks for xrumer mentioned above and they are supposed somewhere around the forum. Each time they were mentioned a member would say they would look for it but never got back to us.

I did my own research but was unable to come up with either guide. Could someone who knows about these guides or any other good ones please post the links for these. We all appreciate it!

Kind Regards,
killxp
 
- is it working only for forums or also other stuff like wordpress comments?
- I assume xrumer works better for abandoned forums with no pr.
- If it finds an abandoned forum where someone posts thousands of viagra links and I want to post a "dvd player" link or so, will it help or harm?
- is it hard to use?, i mean: do you have to sit all day long and "do something" or is it a fully automated software?
- what is the usual day of a xrumer user? finding forum links? spamming? drinking margherita on the beach?

- is it adsense safe to spam in forums and promote some adsense sites?
- is there a _working_ xrumer version where you really can do something? the demo from the developer is just a "demo" with no useful functionality.
 
Last edited:
qxxxp said:
- is it working only for forums or also other stuff like wordpress comments?
- I assume xrumer works better for abandoned forums with no pr.
- If it finds an abandoned forum where someone posts thousands of viagra links and I want to post a "dvd player" link or so, will it help or harm?
- is it hard to use?, i mean: do you have to sit all day long and "do something" or is it a fully automated software?
- what is the usual day of a xrumer user? finding forum links? spamming? drinking margherita on the beach?

- is it adsense safe to spam in forums and promote some adsense sites?
- is there a _working_ xrumer version where you really can do something? the demo from the developer is just a "demo" with no useful functionality.
Click to expand...

Hello qxxxp,

Although I do not have xrumer I have done some research and asked around the forums about it so I will try to answer some of your questions. Hopefully, someone more knowledgeable will jump in and fill in the gaps.

-I usually just hear about forum posting and forum profiles. Maybe.
-Well yeah but there are easily a million forums out there. I am sure many have really nice pr that xrumer can break into.
-I can not think why this would be harmful. At the very least it is just another backlink.
- Apparently it has a very steep learning curve. As for automation, it seems renting out a server is a good idea. Then you can just let it run and do whatever you want. If running it off your home computer its pretty much the only thing you can have running if you set it at a decent speed.
-OK, can't really answer this one from experience. What I do know is that many people use it in conjunction to with ScrapeBox instead of just spamming the net. Although there are a few who just like to spam the internet as well.
- If you are using xrumer in hopes of traffic then you really need to work on your comments. The more natural they look and the more value they offer the higher the chances that your link stays and people follow it to your site.
- Yes, the full version is very capable. Although the price is already steep you should really look into renting out a server for this. It is definitely the best way to harness some of xrumer's potential. The cheapest vps could run you $50/month while more powerful servers can hit $300/month. There are beginner to advanced users that use either of them.

I hope this helps.

Kind Regards,
killxp
 
Well, i have completed second blast(~130,000 linkslist) without including any spam links..yet!

Here is the report:
Successful: 8149
Part.Succ.: 6151
Profiles: 6218
Activation Required: 3736
The Rest: 112964

When the opened the success list, many were not working. So i guess the ACTUAL successful posts will be ~5000 only :(

Why is that i am having "Activation Required: 3736" ?? I used Gmail and i didnot face any email problems.

Also, most important and FAQuestion, how to improve success rate? Out of 130,000 links, 112,964 are wasted! :(

HOw to reduce this wastage?
 
shashank_re said:
Well, i have completed second blast(~130,000 linkslist) without including any spam links..yet!

Here is the report:
Successful: 8149
Part.Succ.: 6151
Profiles: 6218
Activation Required: 3736
The Rest: 112964

When the opened the success list, many were not working. So i guess the ACTUAL successful posts will be ~5000 only :(

Why is that i am having "Activation Required: 3736" ?? I used Gmail and i didnot face any email problems.

Also, most important and FAQuestion, how to improve success rate? Out of 130,000 links, 112,964 are wasted! :(

HOw to reduce this wastage?
Click to expand...

Ouch, less than 1% success? Thank you for posting your actual results. I would also like to know the reasons for such a low success rate and what could be done about it.

Kind Regards,
killxp
 
just read the tutorial on botmaster forum..1% is too bad. Guys claiming 50 to 90% with proper list..Though I have just started a week before I get 10% from what I gathered.
 
silent_thunder said:
just read the tutorial on botmaster forum..1% is too bad. Guys claiming 50 to 90% with proper list..Though I have just started a week before I get 10% from what I gathered.
Click to expand...

I don't know. I have seen plenty of people offering 100k blasts and stating at the very least 5%. Less than 1% seems low. Also, I think botmasternet.com might state something low so they don't keep getting complaints.

I am sure shashank_re should be able to double if not triple his success rate with the proper adjustments.

Kind Regards,
killxp
 
Last edited:
Great results. There is so many WHY SO things.
Just check back to failed reports and see what caused it and change it for good.

shashank_re said:
Well, i have completed second blast(~130,000 linkslist) without including any spam links..yet!

When the opened the success list, many were not working. So i guess the ACTUAL successful posts will be ~5000 only :(

Why is that i am having "Activation Required: 3736" ?? I used Gmail and i didnot face any email problems.

Also, most important and FAQuestion, how to improve success rate? Out of 130,000 links, 112,964 are wasted! :(

HOw to reduce this wastage?
Click to expand...
 
shashank_re said:
^^Yeah!
But what adjustments?
Click to expand...

Maybe you could post a video of what you do with xrumer. Than more experienced members could help you (or do some "backseat blasting"). As mentioned above there are numerous reasons why you are not experiencing the most efficient results.

If you don't have the right kind of video software just get the latest version of camtasia studio.

HTML: 
http://www.techsmith.com/download/camtasiatrial.asp

Its good for 30 days if you just submit your email. Past that, well we all know there are ways and where to go.

Kind Regards,
killxp
 
Guys, i made a "Introduction" post and after ~10 days, when i tried to edit that post, i am getting the message "Logged i. Chosen username "previouslyusedname".couldnot edit. post either deleted by mod blah blah blah".
But when i check the link, the post is not deleted and its very much alive!

The steps what i did are,
Changed the ID to the number of the project and selected "Elinkslist" selected option "Post on behalf of already registered user" in advanced option..

I tried with over 10 links and i get the same message everytime and my post is not being changed/edited.

But i was able to edit the post when i manually logged in to the forum!
 
i am not sure about this but from previous reads you are using the wrong type of list for question and answer mode

try using RLinksList

so steps are
-create new project
-load LinksList id1 (or whatever number you have)
-post to forums

-create new project
-load RLinksList id1
-post to forums
 
^^No! iam not using the Q&A method!


I am just trying to edit the previously made post...
 
what is a good amount of threads to run at once while using hrefer?

i am using high speed internet connection on regular desktop computer
 
shashank_re said:
Well, i have completed second blast(~130,000 linkslist) without including any spam links..yet!

Here is the report:
Successful: 8149
Part.Succ.: 6151
Profiles: 6218
Activation Required: 3736
The Rest: 112964

When the opened the success list, many were not working. So i guess the ACTUAL successful posts will be ~5000 only :(

Why is that i am having "Activation Required: 3736" ?? I used Gmail and i didnot face any email problems.

Also, most important and FAQuestion, how to improve success rate? Out of 130,000 links, 112,964 are wasted! :(

HOw to reduce this wastage?
Click to expand...

Success depends on so many things, proxies, captcha quality, footprint quality when harvesting the list, Xrumer "self learned" history (yeah you can make one hell of a killer if you've been blasting alot and knew what you did (whistle) ) .... and I could continue :)
 
cdc515 said:
what is a good amount of threads to run at once while using hrefer?

i am using high speed internet connection on regular desktop computer
Click to expand...
I use 500 threads with hrefer. But it depends on computer if you have powerful one go with max threads - 500
 
Yes i do 500 in hrefer, this software is powerfull, know im just doing some spam (my linklist), not obvious spam, ive wrote a simples text, and a link, ive bought xrumer yesterday and im learning...Tomorrow i will do a a post and i will do selfposts, i do the question and the answers after a few hours, and after that the link off corse...ahaha

I will try 1000 in xrumer, i think that is not a problem... will see.
 
Advertise on BHW
You must log in or register to reply here.
Sign up now!

Main Menu

Home Main Forum List Black Hat SEO White Hat SEO BHW Newbie Guide Blogging Black Hat Tools Social Media Downloads

Marketplace

Account Selling Content / Copywriting EBooks / Methods Hosting Misc Proxies For Sale SEO - Link building SEO - Packages Social Media Social Media - Panels Web Design More

Making Money

Affiliate Programs Hire a Freelancer IM Journeys Making Money Pay Per Click Site Flipping Want to Buy

BlackHat World

Dispute Resolution Forum Suggestions & Feedback Introductions Lounge
Back
Top