jaksana03
Supreme Member
- Dec 10, 2010
- 1,491
- 489
Complex SEO Plan found somewhere else
Okay, so as my first contributing post to help out with linkbuilding and that whole shebang, here's what I'm doing. This isn't pretty, or fast, or whatever you wanna use. But, it's working. It spans several programs, a couple man-hours and a few good beers.
Building a strong 1st, 2nd, 3rd tier with fairly unique content
Getting pretty unique (85% and above) content in minutes, not days
Leveraging my initial tiers with a blog network approach
Increasing levels of tiered linking to all tiers
"Scrambling" the tiers for randomization
Simple Indexing Processes
Repeating for all of a site's keywords.
Ok, so assuming you've built your site correctly, optimized your content, made sure it was unique, blah blah blah...here's where things get fun. Or annoying, if you have a low tolerance for a LOT of work for max results.
TOOLS YOU'RE GONNA NEED:
Senuke
GSA
Article Kevo
Wicked Article Creator
Article Builder
Inspyder Backlink Monitor
Inspyder Rank Reporter (optional, I'm sure there's free tools)
Backlinks Indexer
Captcha Breaker (for sustainability reasons, DBC gets EXPENSIVE with this method.)
CONTENT
Okay, so everybody's gripe seems to be content, authority, yadda yadda yadda. I'm gonna give you a shortcut that's been working for me with minimal dead backlinks for my campaigns. I'm talking 3600 backlinks after SENuke weeds out the dead ones.
Go to articlebuilder, grab a generic article for your base, hopefully something close to your niche. Doesn't have to be dead exact, we'll fix that later. AB Settings: 15 spun together articles, LSI replacement. Super spun if you want, up to you. Works with and without. Grab the Article.
Open Wicked Article Creator, paste your AB article in there, inject content as their tutorial videos describe. Bullet points, bunch of spun images, spun videos, the works. Use the SENuke tab to make it friendly for nuke. WAC will add all these things in to make your article unique from 85% and up. Keep toying with their settings if it's not above 85%, and follow their videos to the letter. It'll get above 85%, I promise. I regularly get 95%-99%.
LINK BUILDING
Okay, here's where things get tricky.
We're going to use SEnuke for this part, but it's going to be a bit complicated from here on out.
Load up Nuke, and create your own random templates, 2 in total. One is for the first 3 tiers that will be in contact with your money site, the second is for building deep tiers of links, that's all you really need. We know forum profiles suck at anything but Tier 3 and below, so don't use them in your base template. Put toolboxes after each module on your diagram, so it cleans out dead links and keeps your link list relatively fresh. I don't use indexer on any of my modules, because that's taken care of in a later step when my campaign finishes.
My custom templates run on anywhere between 4-8 account profile creation modules, so take that into account when building. Why do I have so many? Link/account/IP/content diversity. It's a lot harder to find than just using the presets.
Once you have your templates created, use the 3 tier one in turbo wizard, load your URLs, and keywords. Don't load your generic spun text at this point, do that manually after the wizard has completed. 3 profiles, 30 day spread, 1 link per post, use article builder content set at 3 spun articles per module. We don't want to attract too much attention at first. Run the wizard, let it complete.
Create your additional 5 account profile modules, and attach each one to 1 of your tier 1 modules each. This allows for complete uniqueness across the board, the randomization between 3 profiles is too noticeable. While in your T1 modules, where it says subdomain, put a '-' between your KWs and the spun numbers for keeping your keyword integrity intact. This will create accounts like generic-keyword-20, instead of generic-keyword20, which we're not trying to rank for.
Go to your Money Site URL list, add in your spun generics at this point. It adds extra diversity so you're not penalized.
Let this baby run as-is until the campaign's completed.
LINK CHECKING
Using Inspyder Backlink Monitor, import your successful links, and hit "Run" to spider the link network you just built. Filter the dead ones/broken tiers out, they're useless. From inside backlink monitor, select all the tier 3 properties that are ******** that aren't indexed, and run them through Backlink Indexer. It might be expensive, but their case study shows that they have a 97% success indexing rate of forum profiles made by Xrumer, which is impressive. Let that run on its' own, it'll update your links whenever you open the program. The reason why I only index tier 3's is because the spiders will naturally crawl the network up to your tier 1's and your money site on its' own, so save yourself the credits.
LEVERAGING YOUR NEW LINK NETWORK
Okay, so you have your thousands of indexed links that nuke has only sent 1 article to. This will get picked up by human moderators, which we already know. This is where Article Kevo comes in handy.
Navigate to your links folder in SENuke, usually AppData/Local/SENuke/Config. Copy these to a new folder, and strip out all the XML surrounding the actual URLs. Open Article Kevo, import links. Copy your Account Profile Emails out of SENuke, and use those to post fresh content from the Content step above being repeated. Set it up to update bi-weekly. Ta-da, automated network. Article Kevo also supports indexing services, so wait to see if they were successful, and then hit them.
Fast N' Dirty Links With GSA
Okay, set up GSA to point at all the tier 2 and tier 3 links as described here on IMS in one of the GSA threads, and let that thing rip for anywhere between 10-21 days.
LINK CHECKING PT 2
Alright, grab the links from GSA and put them in backlink monitor, and run them through Backlink Indexer.
LINK BUILDING PT 2
Run that second template on each cluster of your original tier 3 links from the first SENuke campaign. For mine, that means 4-10 of these templates running simultaneously. Load into Backlink Monitor, then send to backlink indexer as mentioned above. Run GSA to all of these links for the first time. This section of links doesn't get treatment from Article Kevo, they're just links to links that can continuously be built.
RANK REPORTER
Track your keywords in this, and watch the rankings rise like crazy.
I know this is kind of haphazardly explained, if anyone wants a walkthrough or videos made, let me know. It works for every site I've done SEO for without fail, penalty, or loss of rank. Every 6 months, I'll run the first Nuke campaign again with new content to rebuild dead properties/continue the cycle.
Okay, so as my first contributing post to help out with linkbuilding and that whole shebang, here's what I'm doing. This isn't pretty, or fast, or whatever you wanna use. But, it's working. It spans several programs, a couple man-hours and a few good beers.
Building a strong 1st, 2nd, 3rd tier with fairly unique content
Getting pretty unique (85% and above) content in minutes, not days
Leveraging my initial tiers with a blog network approach
Increasing levels of tiered linking to all tiers
"Scrambling" the tiers for randomization
Simple Indexing Processes
Repeating for all of a site's keywords.
Ok, so assuming you've built your site correctly, optimized your content, made sure it was unique, blah blah blah...here's where things get fun. Or annoying, if you have a low tolerance for a LOT of work for max results.
TOOLS YOU'RE GONNA NEED:
Senuke
GSA
Article Kevo
Wicked Article Creator
Article Builder
Inspyder Backlink Monitor
Inspyder Rank Reporter (optional, I'm sure there's free tools)
Backlinks Indexer
Captcha Breaker (for sustainability reasons, DBC gets EXPENSIVE with this method.)
CONTENT
Okay, so everybody's gripe seems to be content, authority, yadda yadda yadda. I'm gonna give you a shortcut that's been working for me with minimal dead backlinks for my campaigns. I'm talking 3600 backlinks after SENuke weeds out the dead ones.
Go to articlebuilder, grab a generic article for your base, hopefully something close to your niche. Doesn't have to be dead exact, we'll fix that later. AB Settings: 15 spun together articles, LSI replacement. Super spun if you want, up to you. Works with and without. Grab the Article.
Open Wicked Article Creator, paste your AB article in there, inject content as their tutorial videos describe. Bullet points, bunch of spun images, spun videos, the works. Use the SENuke tab to make it friendly for nuke. WAC will add all these things in to make your article unique from 85% and up. Keep toying with their settings if it's not above 85%, and follow their videos to the letter. It'll get above 85%, I promise. I regularly get 95%-99%.
LINK BUILDING
Okay, here's where things get tricky.
We're going to use SEnuke for this part, but it's going to be a bit complicated from here on out.
Load up Nuke, and create your own random templates, 2 in total. One is for the first 3 tiers that will be in contact with your money site, the second is for building deep tiers of links, that's all you really need. We know forum profiles suck at anything but Tier 3 and below, so don't use them in your base template. Put toolboxes after each module on your diagram, so it cleans out dead links and keeps your link list relatively fresh. I don't use indexer on any of my modules, because that's taken care of in a later step when my campaign finishes.
My custom templates run on anywhere between 4-8 account profile creation modules, so take that into account when building. Why do I have so many? Link/account/IP/content diversity. It's a lot harder to find than just using the presets.
Once you have your templates created, use the 3 tier one in turbo wizard, load your URLs, and keywords. Don't load your generic spun text at this point, do that manually after the wizard has completed. 3 profiles, 30 day spread, 1 link per post, use article builder content set at 3 spun articles per module. We don't want to attract too much attention at first. Run the wizard, let it complete.
Create your additional 5 account profile modules, and attach each one to 1 of your tier 1 modules each. This allows for complete uniqueness across the board, the randomization between 3 profiles is too noticeable. While in your T1 modules, where it says subdomain, put a '-' between your KWs and the spun numbers for keeping your keyword integrity intact. This will create accounts like generic-keyword-20, instead of generic-keyword20, which we're not trying to rank for.
Go to your Money Site URL list, add in your spun generics at this point. It adds extra diversity so you're not penalized.
Let this baby run as-is until the campaign's completed.
LINK CHECKING
Using Inspyder Backlink Monitor, import your successful links, and hit "Run" to spider the link network you just built. Filter the dead ones/broken tiers out, they're useless. From inside backlink monitor, select all the tier 3 properties that are ******** that aren't indexed, and run them through Backlink Indexer. It might be expensive, but their case study shows that they have a 97% success indexing rate of forum profiles made by Xrumer, which is impressive. Let that run on its' own, it'll update your links whenever you open the program. The reason why I only index tier 3's is because the spiders will naturally crawl the network up to your tier 1's and your money site on its' own, so save yourself the credits.
LEVERAGING YOUR NEW LINK NETWORK
Okay, so you have your thousands of indexed links that nuke has only sent 1 article to. This will get picked up by human moderators, which we already know. This is where Article Kevo comes in handy.
Navigate to your links folder in SENuke, usually AppData/Local/SENuke/Config. Copy these to a new folder, and strip out all the XML surrounding the actual URLs. Open Article Kevo, import links. Copy your Account Profile Emails out of SENuke, and use those to post fresh content from the Content step above being repeated. Set it up to update bi-weekly. Ta-da, automated network. Article Kevo also supports indexing services, so wait to see if they were successful, and then hit them.
Fast N' Dirty Links With GSA
Okay, set up GSA to point at all the tier 2 and tier 3 links as described here on IMS in one of the GSA threads, and let that thing rip for anywhere between 10-21 days.
LINK CHECKING PT 2
Alright, grab the links from GSA and put them in backlink monitor, and run them through Backlink Indexer.
LINK BUILDING PT 2
Run that second template on each cluster of your original tier 3 links from the first SENuke campaign. For mine, that means 4-10 of these templates running simultaneously. Load into Backlink Monitor, then send to backlink indexer as mentioned above. Run GSA to all of these links for the first time. This section of links doesn't get treatment from Article Kevo, they're just links to links that can continuously be built.
RANK REPORTER
Track your keywords in this, and watch the rankings rise like crazy.
I know this is kind of haphazardly explained, if anyone wants a walkthrough or videos made, let me know. It works for every site I've done SEO for without fail, penalty, or loss of rank. Every 6 months, I'll run the first Nuke campaign again with new content to rebuild dead properties/continue the cycle.
