Permanently Closed Marketplace Sales Thread

[DunDidIt2X]

This is a reply for all above. All support is handled through the website or by emailing support at [email protected]. And ALL Support tickets are handled immediately within 24-48 hours from date of reception, not including weekends and holidays, although the support staff at times do reply on weekends.

NOW TO ADDRESS THE ISSUE OF UPLOAD URL FEATURE-If perhaps some of you would spend a lttle time reading this thread, the FAQ page and WATCH THE TUTORIAL VIDEOS AND FOLLOW DIRECTIONS THEN YOU WOULD HAVE NO ISSUES. Here is a video on the upload url Feature http://screencast.com/t/YoIDghM5

To ELVISWONG and VERIAL- FOR the 100 time as stated on this thread several times and on the tutorial videos we do not offer keyword support. If you have solid keywords that should yeild more than 400 results then you EITHER HAVE AN ISSUE WITH YOUR PROXIES ( And we do not offer proxy support-we are not a proxy service). THERE ARE NUMEROUS VIDEOS ONLINE DEMONSTRATING HOW THIS APP WORKS AND THE SETTINGS WE USE! If you use the settings we use and you still think you should have more results then the only other thing it can be IS YOUR PROXIES!!

There are hundreds of poeple that successfully use Paigham Bot everyday, if you follow the videos and read this thread throughly and read the FAQ page AND MOST IMPORTANTLY GET GOOD PROXIES, then you will have no problem running the application like evferyone else.

Again, Please if you have a support issue contact support at http://www.paighambot.com or email at [email protected] instead of just filling up this thread with questions that have already been answered here and elsewhere!!

Again we do not offer PROXY Support nor do we offer Keyword selection support. You guys need to use your own brains for this.

 

[DunDidIt2X]

Hey guys, I'm running into some problems I'm hoping I could get some help with. I filled out a support request on your website yesterday but am still waiting on a reply. Anyhow, I just purchased the software and when I try to upload URLs, every time I hit the submit button to start the contact form submitting, I get the "it will begin in 3 seconds" message and then every time it instantly says posting is complete. But it doesn't post to 1 single contact form. So I tried scraping a few URLs with your program and got my message successfully submitted to a small portion of those URLs, but then once again when I tried to upload the failed URL list that I exported, same thing happens... instantly says posting is complete without doing one submission. So it seems there is an issue every time I use the "Upload URLs" option.

Also, I am now noticing that the messages that were successfully posted to the contact forms was apparently incomplete. I kept the message somewhat short (maybe about 7 or 8 sentences in total) but the people receiving the message only got the first 2 sentences. So I'm getting a lot of replies of people asking wtf I'm talking about lol. Do you have any idea as to why only a small portion of the message I input in is being submitted to all these Contact Forms?

Please please please help me with these issues. I absolutely love the idea behind your software and I can already tell I'll be a long time customer if I can just get these things fixed up.

Thanks a bunch -

I dont see this support ticket at all in our system. Did you email support or did you fill out the ticket on the site?

The only thing this could be is your internet speed is not conducive to the amount of thread that you are uising to post messages. Try reducing your threads by half and see if this problem persists.

 

[Cratos]

Seems interesting enough. I think i might bite. Would you recommend this program with an MLM website?

This bot is perfect for MLM. We highly recommend it for this niche. PB can also be marketed to your referrals and prospects conveniently.

 

[DunDidIt2X]

Not a good look. I think ill hold off on purchasing this. Dont like support that starts off strong when a product is new and then slips on support once their program is out for a few months. Not a good business move. My search continues.

Sorry to hear that you are passing up this opportunity to make an impact for your own marketing needs. Not sure where you get the idea of lacking support, as pretty much everyone that has contacted our support was impressed with our support. Wish you the best of luck.

 

[BackpackNinjuh]

I dont see this support ticket at all in our system. Did you email support or did you fill out the ticket on the site?

The only thing this could be is your internet speed is not conducive to the amount of thread that you are uising to post messages. Try reducing your threads by half and see if this problem persists.

Yes I filled out the form on your website on 3 different occasions. But no worries, as long as I can get some feedback on here that will do as well. But as for the problem, its 100% not the internet speed that is causing this... I have a very fast internet connection. And I am only run 1 thread when performing this operation on your program. But I still can't upload and successful run any URLs whatsoever. It always instantly states that the operation is completed and never goes to even one URL on the list I uploaded. This list I upload is a text document (as stated in my last message, I exported the unsuccessful URLs from my first campaign and then just reuploaded that and got the same problem). And the 2nd problem is that only a small portion of my message posted to the URLs that did get submitted successfully.

So if its not the internet speed and I'm only running 1 thread, what else could be causing these 2 issues? Has no one else experienced these issues before? I really want to get this fixed asap because I can't use the software in the meantime. Could there have possibly been a problem during the installation? Maybe I could try installing it on a different computer...

Thanks again for your help, hopefully we can get this resolved soon.

 

[DunDidIt2X]

Yes I filled out the form on your website on 3 different occasions. But no worries, as long as I can get some feedback on here that will do as well. But as for the problem, its 100% not the internet speed that is causing this... I have a very fast internet connection. And I am only run 1 thread when performing this operation on your program. But I still can't upload and successful run any URLs whatsoever. It always instantly states that the operation is completed and never goes to even one URL on the list I uploaded. This list I upload is a text document (as stated in my last message, I exported the unsuccessful URLs from my first campaign and then just reuploaded that and got the same problem). And the 2nd problem is that only a small portion of my message posted to the URLs that did get submitted successfully.

So if its not the internet speed and I'm only running 1 thread, what else could be causing these 2 issues? Has no one else experienced these issues before? I really want to get this fixed asap because I can't use the software in the meantime. Could there have possibly been a problem during the installation? Maybe I could try installing it on a different computer...

Thanks again for your help, hopefully we can get this resolved soon.

Regarding the upload url feature. We have identified a bug with windows 8.1 devices. This bug was identified yesterday. All other features of Paigham Bot worked properly, however the issue in windows 8.1 machines is isolated as on all previous version of windows we could not duplicate the error. So if you are running this on windows 8.1 please install on other pc.

You should email support at [email protected] with your license key number requesting a key reset so you can reinstall and use on another machine.

Regarding the other issue. We have never had one ticket or any previous reports of such a problem. The only possible thing is your internet speed. You have to also keep in mind that proxies relays reduce your internet speed as well. And what do you consider fast internet? How many MBPS?

We can not duplicate this error, and in light that you are having two issues I would recommend that you install on a windows 7 or earlier machine.

 

[counselor_X]

This is a legitimate question because I am thinking of buying this - In what ways does your program perform better than Scrapebox when scraping and posting to contact forms? I have been using Scrapebox to scrape and post to contact forms for 1 to 2 years now. I think a lot of people don't realize that you can do this with Scrapebox. I also use HMA and I set it to change my IP every 1 minute and ten seconds. Sometimes HMA will hang up for several seconds or minutes, which causes the URL scraping to fail because an IP will get blocked. Or, HMA will simply change to a blocked IP and then the scraping will fail. The annoying part of this is that it then takes human interaction with Scrapebox to restart the scraping process. Does this bot have better integration with HMA to where it won't just stop scraping if it encounters a blocked IP? The ideal outcome would be that it continues to try to scrape, even if an IP is blocked, and successfully resumes once a new IP is acquired from HMA.

Also, does this bot support a huge number of keywords? I usually do scrape jobs on Scrapebox in batches of 10,000 keywords + 2 footprints (20,000 keywords total per batch)

One more question - Are the footprints to find contact forms "built in" to the scraping function, or do we supply our own footprints?

And one last question - What platforms of contact forms does this post to? Wordpress, Joomla, etc, anything else?

Thank you in advance

 

[DunDidIt2X]

This is a really good set of questions. I am going to paste your post below and answer each point in Red. See below:

This is a legitimate question because I am thinking of buying this - In what ways does your program perform better than Scrapebox when scraping and posting to contact forms?

Scrapebox is a great tool. Most of us here use it all the time, we love it and think it is an essential tool for any internet marketer to have. In that regard, to answer your question specifically in comparison of scrapebox' contact form messaging ability to that of Paigham Bot's. Some of my answer to this is in your other questions below but in general we believe Paigham Bot is a stand alone Product, out of the box program that most anyone can easily run without much technical know how, easily compiling full data lists of social media accounts, emails and Phone Number Call Lists in the push of essentially a button.

I have been using Scrapebox to scrape and post to contact forms for 1 to 2 years now. I think a lot of people don't realize that you can do this with Scrapebox. I also use HMA and I set it to change my IP every 1 minute and ten seconds. Sometimes HMA will hang up for several seconds or minutes, which causes the URL scraping to fail because an IP will get blocked. Or, HMA will simply change to a blocked IP and then the scraping will fail. The annoying part of this is that it then takes human interaction with Scrapebox to restart the scraping process. Does this bot have better integration with HMA to where it won't just stop scraping if it encounters a blocked IP? Yes. It actually will try to reestablish the connection with HMA by resetting the connection.The ideal outcome would be that it continues to try to scrape, even if an IP is blocked, and successfully resumes once a new IP is acquired from HMA. Yep it will.

Also, does this bot support a huge number of keywords? I usually do scrape jobs on Scrapebox in batches of 10,000 keywords + 2 footprints (20,000 keywords total per batch) I have loaded a ton of keywords in it.

One more question - Are the footprints to find contact forms "built in" to the scraping function, or do we supply our own footprints? They are built into the Application itself, though you can create and use custom footprints if you want.

And one last question - What platforms of contact forms does this post to? Wordpress, Joomla, etc, anything else? Anyone that meet the posting field requirements and meet the footprint requirement.


Hope this answers your questions.

 

[DunDidIt2X]

http://www.blackhatworld.com/blackhat-seo/members/148951-backpackninjuh.html

Got your email and also located your original support tickets for some reason your messages went to spam in both systems. Do apologize for the inconveinence. Rest your key and also responded to your email.

 

[DunDidIt2X]

New Paigham Bot Update- Version 6.0.1.5

New version Update Includes:

Fixed Windows 8.1 Upload Url Bug
Enhanced Url parsing on Upload URL Feature (Will auto detact if Contact Page is Loaded or Root Domain)
Usual Updates And Fixes

 

[BackpackNinjuh]

Got your email and also located your original support tickets for some reason your messages went to spam in both systems. Do apologize for the inconveinence. Rest your key and also responded to your email.

Thanks bud. Just replied earlier to see if you could please email me another download link... it seems that link expired when I tried to download it on a different computer. One more question regarding these issues I was having, do you think it possibly has anything to do with the .NET frame I have? I noticed when I tried to upload the demo on this other computer, it said I need .NET v4.0. I didn't get that notification when I downloaded the paid version on my original computer, but I did just notice I wasn't running version 4.0 on that one either.

Thanks again for the great support-

 

[DunDidIt2X]

Thanks bud. Just replied earlier to see if you could please email me another download link... it seems that link expired when I tried to download it on a different computer. One more question regarding these issues I was having, do you think it possibly has anything to do with the .NET frame I have? I noticed when I tried to upload the demo on this other computer, it said I need .NET v4.0. I didn't get that notification when I downloaded the paid version on my original computer, but I did just notice I wasn't running version 4.0 on that one either.

Thanks again for the great support-

Just sent you email and PM with link.

Regarding your other question, No it is not something with that since you have 4.0 installed that is fine. You never mentioned what operating system you are trying to run this on? The Update Issue yesterday had to do with a bug with windows 8.1.

Sometimes people have custom settings that arent standard that can interfere, usually this has to do with admin permission settings from all of the instances I have heard of, or even some virtual windows machines ran on a mac. So usually it is not the standard pc configuration that the application is set to run on. Essentially we have to go to the pc (which we have done on many occasions) and looked into what is set differently in that machine than standard ones and make a update fix. However, this requires us having remote access and control of the machine.

Anyways, do try this on a new machine and if you have any issues please contact me directly on Skype and we can arrange a time that I can get access to your machine. But I dont anticipate you to have any issues.

 

[BackpackNinjuh]

Just sent you email and PM with link.

Regarding your other question, No it is not something with that since you have 4.0 installed that is fine. You never mentioned what operating system you are trying to run this on? The Update Issue yesterday had to do with a bug with windows 8.1.

Sometimes people have custom settings that arent standard that can interfere, usually this has to do with admin permission settings from all of the instances I have heard of, or even some virtual windows machines ran on a mac. So usually it is not the standard pc configuration that the application is set to run on. Essentially we have to go to the pc (which we have done on many occasions) and looked into what is set differently in that machine than standard ones and make a update fix. However, this requires us having remote access and control of the machine.

Anyways, do try this on a new machine and if you have any issues please contact me directly on Skype and we can arrange a time that I can get access to your machine. But I dont anticipate you to have any issues.

Ugh same exact problem on my other laptop (upload URL list - hit submit - instantly says posting complete). I am running windows 7 on both these computers. I just added you on skype. Thanks again for all your help. Once we get this fixed I'll purchase another license so I can have the program on both my laptops.

 

[DunDidIt2X]

Ugh same exact problem on my other laptop (upload URL list - hit submit - instantly says posting complete). I am running windows 7 on both these computers. I just added you on skype. Thanks again for all your help. Once we get this fixed I'll purchase another license so I can have the program on both my laptops.

After you upload the urls you have to click

SCRAPE BUTTON

Then after 500 forms are found you can click to post them.

 

[blahzay]

I had a question. I actually looked at the tutorial videos yesterday to get a better grasp of what this program actually does. So basically we are using the contact forms that are already apart of certain websites so when submitting a contact form, so is the targeted traffic that we are trying to get to our money site are basically the webmasters of those sites? Not sure how contact forms actually work but i assume they are just part of the "contact us" portion of a website that only the webmaster/admin of that site will view. Am I correct? and how exactly does the social media portion work, is it just pulling the actual fan pages or what not of those same sites? So in essence we are contacting the "same" person regardless if its their social media site or contact form on their site?

Im sorry for the dumb questions but just trying to get a better understanding of who im actually marketing to. I just see webmasters as thinking everything that is submitted to them as spam/not interested because they already have a website and most likely know the "game".

 

[blahzay]

With that being said, I'm still going to try it. LOL. Just want a better understanding of who im actually marketing to so i know how to approach this. Thanks for any feedback.

 

[BackpackNinjuh]

After you upload the urls you have to click

SCRAPE BUTTON

Then after 500 forms are found you can click to post them.

Thanks again for all the great support. You took the time to personally help and walk me through everything on skype. The mistake was due to a lack of knowledge on my end, but even then you were still patient and detailed. Great support is hard to find nowadays so I highly recommend this program to anyone in question.

 

[mancave123]

Just want to say THANK YOU for the amazing update you did man!! This is awesome! Paighan is running amazing. Just can't load 80 k lists but who cares at these speeds. The successful posts rate is amazing!I am getting tons of traffic and business from this. You deserve praise!

 

[Cratos]

thank you for the kind comments guys. Appreciate it. Glad Paigham Bot is working well for you.

 

[DanGrowingAds]

Hello,

I got the demo version of the software and used keywords that give a high amount of search results.. However, it only shows 9 pages found?

Is that simply the limitation of the demo version (you don't really have a list anywhere of what the difference is between paid/demo(free)) or is there some issue I'm missing?

Thanks.