Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
Thanks for the NS IPs, , Workaround implemented :)

Anyone else trying this - you will most likely need to re-activate. but hey.. All is good & working since :)

* 216.244.*.* is the OLD server. Our new IP is 192.169.68.74 and .75, along with several other IPs as we lease a range for our dedicated server. You see 216.244.*.* when you ping it, but it is actually the OLD one. DNS changes are still propagating unfortunately. If I ping the servers from my IP, I just receive host not found. Again, another illustration of the fact that DNS changes take time to propagate is the fact that we have different results.

Just for the record. -- YES it is functioning now ... for me at least by manually pointing a dns for several domains to the new name servers.
 
Last edited:
Hello everyone. Please understand that this is a catastrophic headache for you just as much as it is for us. We offer hosting for many clients, and Proxy Multiply is not the only software that we sell - everything is on hold currently.

To clarify some points mentioned above:

* 216.244.*.* is the OLD server. Our new IP is 192.169.68.74 and .75, along with several other IPs as we lease a range for our dedicated server. You see 216.244.*.* when you ping it, but it is actually the OLD one. DNS changes are still propagating unfortunately. If I ping the servers from my IP, I just receive host not found. Again, another illustration of the fact that DNS changes take time to propagate is the fact that we have different results.
* We have been in very close contact with our host and registrar. The only thing holding up the "change" to the new IP range is propagation of the DNS server. Everything has been verified to be configured correctly.

.

Can you confirm that someone has updated the DNS records for the-proxy-list.com too?
 
domain: the-proxy-list.com
created: 05-Nov-2011
last-changed: 06-Nov-2012
registration-expiration: 05-Nov-2013

nserver: ns1.the-proxy-list.com 216.244.72.162
nserver: ns2.the-proxy-list.com 216.244.72.163

Information Updated: Sat, 16 Feb 2013 01:34:53 UTC

This is real-time. I'm pretty sure someone forgot to update the DNS records for the-proxy-list.com, and since that domain is the DNS for jrimsoftware.com (as well as itself) nothing is happening. You need to get on to 1&1 (or whoever administers your domain) and get them to change the DNS servers for the above domain to the new IP addresses.

 
I am not sure if my question was skipped over about using a different url as the proxy judge?

I don't consider a day or so of downtime anything significant, every software has an issue now and then.
 
I don't consider a day or so of downtime anything significant, every software has an issue now and then.

It's only significant because I believe JRIM has been misled by his host that 'everything is fine' when, in fact, someone forgot to update the IP addresses of his DNS domain, which means it - in its current state - is never going to work. DNS propagation really does not take this long - especially when you query the DNS server directly.

As soon as someone updates the NS IP addresses for the-proxy-list.com, it should all start working within minutes.

Just trying to help here .. as I said, JRIM has been misled by his host that all is fixed.
 
Last edited:
Obviously the software is still not working - and won't until the problem with the-proxy-list.com is sorted.

As a work around, you can edit c:\windows\system32\drivers\etc\hosts and add the line

192.169.68.75 proxy.jrimsoftware.com

This will get the software to work by bypassing JRIM's DNS servers.

Hopefully, as soon as JRIM sees my message above, he'll get the IP addresses for his name servers updated, and all will be well again. I also sent him a PM yesterday.

EDIT
-----
Although the above gets the software to work, I'm having other problems. Let me know if this works for you. JRIM- if I can help in any way, PM me.
 
Last edited:
changing the host name only gets me past authentication. proxy judge isnt working properly. i get a few working ips then it the rest fail. :(
 
changing the host name only gets me past authentication. proxy judge isnt working properly. i get a few working ips then it the rest fail. :(

Yes - me too. Not sure what the subdomain for the proxy judge is, so unable to add that to hosts file. Sucks :-(
 
The proxy judge uses the-proxy-list.com for resolution, which is hosted on 192.169.68.74

domain: the-proxy-list.com
created: 05-Nov-2011
last-changed: 06-Nov-2012
registration-expiration: 05-Nov-2013

nserver: ns1.the-proxy-list.com 216.244.72.162
nserver: ns2.the-proxy-list.com 216.244.72.163

Information Updated: Sat, 16 Feb 2013 01:34:53 UTC

This is real-time. I'm pretty sure someone forgot to update the DNS records for the-proxy-list.com, and since that domain is the DNS for jrimsoftware.com (as well as itself) nothing is happening. You need to get on to 1&1 (or whoever administers your domain) and get them to change the DNS servers for the above domain to the new IP addresses.


We have contacted 1&1 administrators and informed them that despite us waiting the mandatory 48 hours, it is still not working properly. The information has been forwarded to their 'administrators' and it is awaiting a fix... AVOID 1&1 INTERNET SERVICE AT ALL COSTS! The customer service has been HORRIBLE. They refused to even work with us until the 48 hour period passed. We have not been given a definite time frame on the update, only told that it has been escalated to administrators - but don't hold your breath.

1&1 does not seem to want to acknowledge the urgency of this situation. Our highest priority once this all blows over is to transfer registrars - but that brings on the possibility of more downtime. Just a major catch 22 here.

I am not sure if my question was skipped over about using a different url as the proxy judge?

I don't consider a day or so of downtime anything significant, every software has an issue now and then.

Hi bigdaddy, the software is built-in to utilize our proxy judge @ the-proxy-list.com and cannot be modified. However, if you want to modify your hosts file as mentioned above: the proxy judge uses the-proxy-list.com for resolution, which is hosted on 192.169.68.74

It's only significant because I believe JRIM has been misled by his host that 'everything is fine' when, in fact, someone forgot to update the IP addresses of his DNS domain, which means it - in its current state - is never going to work. DNS propagation really does not take this long - especially when you query the DNS server directly.

As soon as someone updates the NS IP addresses for the-proxy-list.com, it should all start working within minutes.

Just trying to help here .. as I said, JRIM has been misled by his host that all is fixed.

Hey mirror, see above. 1&1 is the one misleading us (the domain registrar), not the host.

Obviously the software is still not working - and won't until the problem with the-proxy-list.com is sorted.

As a work around, you can edit c:\windows\system32\drivers\etc\hosts and add the line

192.169.68.75 proxy.jrimsoftware.com

This will get the software to work by bypassing JRIM's DNS servers.

Hopefully, as soon as JRIM sees my message above, he'll get the IP addresses for his name servers updated, and all will be well again. I also sent him a PM yesterday.

EDIT
-----
Although the above gets the software to work, I'm having other problems. Let me know if this works for you. JRIM- if I can help in any way, PM me.

Great information, thanks! The proxy judge uses the-proxy-list.com for resolution, which is hosted on 192.169.68.74

48+ hours... Still waiting.

We all are kicka :(

changing the host name only gets me past authentication. proxy judge isnt working properly. i get a few working ips then it the rest fail. :(

The proxy judge uses the-proxy-list.com for resolution, which is hosted on 192.169.68.74

Yes - me too. Not sure what the subdomain for the proxy judge is, so unable to add that to hosts file. Sucks :-(

The proxy judge uses the-proxy-list.com for resolution, which is hosted on 192.169.68.74
 
i get this when i try to go to 192.169.68.74
If you feel you have reached this page in error, please contact the web site owner:
[email protected]

you sure the proxy judge is up?
 
JRIM - I have been very nice about this, sending you helpful PMs and trying to make clear from day 1 that this is NOT a DNS propagation issue.

Until you listen to this, you'll never get the problem solved, since you'll just wait forever for these imaginary DNS records to update.

If your name server is ns1.the-proxy-list.com and the IP address for that is registered as 216.244.72.162 (which it is) then Proxy Multiply is not going to work any more until you update that IP address
 
Last edited:
*** REMINDER: For a temporary fix to the issues, you can edit your C:\Windows\System32\drivers\etc\hosts file in Notepad (make sure you run it as an Administrator!) and add the following lines: ***

192.169.68.75 proxy.jrimsoftware.com
192.169.68.74 the-proxy-list.com

i get this when i try to go to 192.169.68.74
If you feel you have reached this page in error, please contact the web site owner:
[email protected]

you sure the proxy judge is up?

192.169.68.74 is the actual server IP. The-Proxy-List.com and the proxy judge are located at http://192.169.68.74/~theproxy/

JRIM - I have been very nice about this, sending you helpful PMs and trying to make clear from day 1 that this is NOT a DNS propagation issue.

Until you listen to this, you'll never get the problem solved, since you'll just wait forever for these imaginary DNS records to update.

If your name server is ns1.the-proxy-list.com and the IP address for that is registered as 216.244.72.162 (which it is) then Proxy Multiply is not going to work any more until you update that IP address

Mirrorman, the issue is being handled properly and I can assure you that the DNS changes were submitted to 1&1 two days ago. The A records have not been updated yet. As mentioned earlier, we have confirmed through our host and registrar that the DNS is configured properly (along with all other aspects of the issue); the only problem is propagation. While your ISP may be reporting 216.244.72.162 as the IP in response to ping, you should use another DNS checker (e.g. DNSSY) to verify the information. You can do so using this link: http://www.dnssy.com/report.php?q=ns1.the-proxy-list.com - the DNS records have not updated, and do not reflect 216.244.72.162.

Edit: Screenshot of DNS settings as proof...
 
i hardcoded
192.169.68.75 proxy.jrimsoftware.com and 192.169.68.74 the-proxy-list.com into hosts. it seems to be working but for some reason im not getting that many authenticated proxies. it also says "Unable to resolve your IP address to compare to proxy testing results." if that helps. should i just wait for propogation to finish or is there anything else i can do on my end to make it work?
 
take a look at http://www.intodns.com/the-proxy-list.com and it shows
[TABLE="class: tabular, width: 99%"]
[TR]
[TD="class: static"][/TD]
[TD="class: icon"]
info.gif
[/TD]
[TD]NS records from your nameservers[/TD]
[TD]NS records got from your nameservers listed at the parent NS are:
Oups! I could not get any nameservers from your nameservers (the ones listed at the parent server). Please verify that they are not lame nameservers and are configured properly.
[/TD]
[/TR]
[TR]
[TD="class: icon"]
pass.gif
[/TD]
[TD]Recursive Queries[/TD]
[TD]Good. Your nameservers (the ones reported by the parent server) do not report that they allow recursive queries for anyone.[/TD]
[/TR]
[TR]
[TD="class: icon"]
pass.gif
[/TD]
[TD]Same Glue[/TD]
[TD]Hmm,I do not consider this to be an error yet, since I did not detect any nameservers at your nameservers.[/TD]
[/TR]
[TR]
[TD="class: icon"]
pass.gif
[/TD]
[TD]Glue for NS records[/TD]
[TD]OK. Your nameservers (the ones reported by the parent server) have no ideea who your nameservers are so this will be a pass since you already have a lot of errors![/TD]
[/TR]
[TR="class: error"]
[TD="class: icon"]
error.gif
[/TD]
[TD]Mismatched NS records[/TD]
[TD]WARNING: One or more of your nameservers did not return any of your NS records.[/TD]
[/TR]
[TR="class: error"]
[TD="class: icon"]
error.gif
[/TD]
[TD]DNS servers responded[/TD]
[TD]ERROR: One or more of your nameservers did not respond:
The ones that did not respond are:
216.244.72.163 216.244.72.162[/TD]
[/TR]
[TR]
[TD="class: icon"]
pass.gif
[/TD]
[TD]Name of nameservers are valid[/TD]
[TD]OK. The nameservers reported by the parent send out nothing as shown above. I can't check nothing so it's a green![/TD]
[/TR]
[TR="class: error"]
[TD="class: icon"]
error.gif
[/TD]
[TD]Multiple Nameservers[/TD]
[TD]ERROR: Looks like you have less than 2 nameservers. According to RFC2182 section 5 you must have at least 3 nameservers, and no more than 7. Having 2 nameservers is also ok by me.[/TD]
[/TR]
[TR]
[TD="class: icon"]
pass.gif
[/TD]
[TD]Nameservers are lame[/TD]
[TD]OK. All the nameservers listed at the parent servers answer authoritatively for your domain.[/TD]
[/TR]
[TR]
[TD="class: icon"]
pass.gif
[/TD]
[TD]Missing nameservers reported by parent[/TD]
[TD]OK. All NS records are the same at the parent and at your nameservers.[/TD]
[/TR]
[TR="class: error"]
[TD="class: icon"]
error.gif
[/TD]
[TD]Missing nameservers reported by your nameservers[/TD]
[TD]You should already know that your NS records at your nameservers are missing, so here it is again:

ns1.the-proxy-list.com.
ns2.the-proxy-list.com. [/TD]
[/TR]
[/TABLE]
[TABLE="class: tabular, width: 99%"]
[TR="class: error"]
[TD="class: static, bgcolor: #ffffff"]OA[/TD]
[TD="class: icon"]
error.gif
[/TD]
[TD]SOA record[/TD]
[TD]No valid SOA record came back![/TD]
[/TR]
[TR="class: error"]
[TD="bgcolor: #ffffff"]MX[/TD]
[TD="class: icon"]
error.gif
[/TD]
[TD]MX Records[/TD]
[TD]Oh well, I did not detect any MX records so you probably don't have any and if you know you should have then they may be missing at your nameservers![/TD]
[/TR]
[TR="class: error"]
[TD="bgcolor: #ffffff"]WWW[/TD]
[TD="class: icon"]
error.gif
[/TD]
[TD]WWW A Record[/TD]
[TD] ERROR: I could not get any A records for www.the-proxy-list.com!

(I only do a cache request, if you recently added a WWW A record, it might not show up here.)[/TD]
[/TR]
[/TABLE]
Hope you get it solved soon, I love proxy multiplier!
 
Last edited:
Mirrorman, the issue is being handled properly and I can assure you that the DNS changes were submitted to 1&1 two days ago. The A records have not been updated yet. As mentioned earlier, we have confirmed through our host and registrar that the DNS is configured properly (along with all other aspects of the issue); the only problem is propagation. While your ISP may be reporting 216.244.72.162 as the IP in response to ping, you should use another DNS checker (e.g. DNSSY) to verify the information. You can do so using this link: http://www.dnssy.com/report.php?q=ns1.the-proxy-list.com - the DNS records have not updated, and do not reflect 216.244.72.162.

Edit: Screenshot of DNS settings as proof...

The issue is not being handled correctly, and until you understand that, then your site will continue to fail. But since you consistently tell me my advice is not needed, both here and in PMs, I'll let it go.

I bought Proxy Goblin and it's working fine.

Server Name: NS1.THE-PROXY-LIST.COM
IP Address: 216.244.72.162
Registrar: 1 & 1 INTERNET AG
Whois Server: whois.schlund.info
Referral URL: http://REGISTRAR.SCHLUND.INFO


>>> Last update of whois database: Sun, 17 Feb 2013 00:51:31 UTC <<<
 
i hardcoded
192.169.68.75 proxy.jrimsoftware.com and 192.169.68.74 the-proxy-list.com into hosts. it seems to be working but for some reason im not getting that many authenticated proxies. it also says "Unable to resolve your IP address to compare to proxy testing results." if that helps. should i just wait for propogation to finish or is there anything else i can do on my end to make it work?

Hey Det0nator, that is because our proxy judge queries a remote SQL database to figure out who is a customer and who isn't, which was slowing down proxy testing. The issue has been resolved.

take a look at http://www.intodns.com/the-proxy-list.com and it shows

...

Hope you get it solved soon, I love proxy multiplier!

Hey tnhomestead, thank you for the information and support. We are still working aggressively with 1&1 to resolve the issue but have made no headway yet. Still playing the waiting game.

The issue is not being handled correctly, and until you understand that, then your site will continue to fail. But since you consistently tell me my advice is not needed, both here and in PMs, I'll let it go.

..

Server Name: NS1.THE-PROXY-LIST.COM
IP Address: 216.244.72.162
Registrar: 1 & 1 INTERNET AG
Whois Server: whois.schlund.info
Referral URL: http://REGISTRAR.SCHLUND.INFO


>>> Last update of whois database: Sun, 17 Feb 2013 00:51:31 UTC <<<

Hey mirror, I understand that it is not working as it should, and so does our registrar. Did you look at the screenshot posted above with the DNS settings marked properly? We have done everything necessary on our end, and 1&1 is working on fulfilling their obligations.

The issue has been monitored and tightly managed over the last nearly 3 days, and 1&1 Internet has informed us that there is nothing more that can be done beyond escalating it to administration (which occurred yesterday, as a result of a phone call by us, as soon as we crossed into 48 hours after DNS change submission). We are awaiting a response from 1&1, and reminding them frequently that we are in dire need of a resolution.

I am glad you found a solution that works for you, but I don't think it's very courteous to pump a competitor in our sales thread.

*** REMINDER: For a temporary fix to the issues, you can edit your C:\Windows\System32\drivers\etc\hosts file in Notepad (make sure you run it as an Administrator!) and add the following lines: ***

192.169.68.75 proxy.jrimsoftware.com
192.169.68.74 the-proxy-list.com
 
JRIM,

So what does "check against a specific url" do?

Unfortunately just changing which IP the-proxy-list.com points to isn't going to specify any folder structure or judge file (I have azenv.php setup on a server for testing with other proxy softwares).
 
JRIM,

So what does "check against a specific url" do?

Unfortunately just changing which IP the-proxy-list.com points to isn't going to specify any folder structure or judge file (I have azenv.php setup on a server for testing with other proxy softwares).

Hi bigd, updating the hosts file does fix proxy testing. The web server knows how to interpret requests for folder structures. Check against specific URL tries navigating to a specific website using the proxy (e.g. https://yahoo.com/ ) and looks for your specified text/content in the page it finds. If it finds the designated content, you reached the page, and the proxy can be used for that website.

As of 3:39 EST, The-proxy-list.com is back up. Jrimsoftware.com will follow shortly.
 
Oh very cool. I'm so glad I asked you about that. I am going to try setting the hosts file to use my own judge shortly. I'll definitely post if I get it to work.
 
Status
Not open for further replies.
Back
Top