Permanently Closed Marketplace Sales Thread

[maxout]

Hi I have tried several software like this and have lost lots of money.
I will like a trial version first
Thanks

 

[prince67]

thank's for this

 

[jimbobo2779]

Thanks for the response. But does the post thread amount do any difference, when it's anyway limited by searching threads (3)? It would be nice option in proxy checker for sure.
Yeh, I am always checking just the PR of the page, that's more relevant. And yes, you are right that anything older with open comments would be either closed for comments or spammed to death.

I just checked the domain PR and it looks far better.

PR0: 142
PR1: 54
PR2: 30
PR3: 16
PR4: 10
PR5: 1
PR6: 0

Also one more question. I am planning a little project, creating MNS with EMD with low competition, which I will be trying to rank solely with NHSEO. Any advice on settings? I was thinking to build links just from pages with PR at least of 1, but that would be really really slow. I am thinking of OBL lower than 50 and 30 links per day, high anchor text diversity, shittons of LSIs and generics etc., though I am still flirting with the idea of using just those PR1 and higher pages, even if it would create maybe 5 per day. Any input on this maybe? Thanks

Oh and thanks for advice lol /weirdtalk

More often than not the number of posts\links will be limited by your search threads so posting threads above 50 for your settings won't increase the number of posts made over time but it could prevent your IPs from getting burnt out on PR requests (though Im not sure this is happening in your case anyway) as there could be times where you are doing a PR check hundreds of times in a few seconds. However with that said if you are also limiting by OBL the number of PR requests will be more limited as lots of pages will fail due to OBL limit before the PR check is done, PR checking is the last limit to be checked to reduce unnecessary checking which will lower the chance of getting your IP burnt out for PR checking.

As far as settings go it is really a case of what you want to do and how far you want to push it. I have never had any issues simply by limiting by OBL and allowing as many links as possible but I do have a few profiles running at the same time so the number of links have always been fairly self limiting in that respect. I rarely limit by PR and wouldn't ever use page PR just because of the results you are seeing in that you just won't get that many links but if you would feel safer going at that rate that is fine, you can always slacken the settings at a later date if you are not happy with the results you are seeing.

As I just said, settings in situations like this generally should be whatever you feel is ideal for your sites. I wouldn't imagine any negative consequence from your proposed settings other than few links but again you can always loosen the restrictions if you are not seeing the gains you would like. Sorry I can't be of more help.

Hi I have tried several software like this and have lost lots of money.
I will like a trial version first
Thanks

There is a free 7 day trial for No Hands SEO available here

 

[Psychobilly1]

I'm using 20 private proxies, but lately, after running NHSEO for a few hours my office IP gets banned on Google temporarily. This only happens when running NHSEO.

Any ideas why this would be happening?

Thanks

 

[jimbobo2779]

I'm using 20 private proxies, but lately, after running NHSEO for a few hours my office IP gets banned on Google temporarily. This only happens when running NHSEO.

Any ideas why this would be happening?

Thanks

Are you sure you have checked the "Use Private Proxies" option is checked and that you also have the option for "Searching" checked as well, otherwise NHSEO will not be using any proxies for searching. The only other reason for this would be if the proxies were leaking, if they were bought from a reputable dealer that isn't very likely but is something to consider. My bet would be you just need to check the options mentioned.

 

[Psychobilly1]

Are you sure you have checked the "Use Private Proxies" option is checked and that you also have the option for "Searching" checked as well, otherwise NHSEO will not be using any proxies for searching. The only other reason for this would be if the proxies were leaking, if they were bought from a reputable dealer that isn't very likely but is something to consider. My bet would be you just need to check the options mentioned.

Yes, I have it checked for posting and searching. I'm using buyproxies.org and have no issues with my other software.

 

[jimbobo2779]

Yes, I have it checked for posting and searching. I'm using buyproxies.org and have no issues with my other software.

I would check that you don't have any blank lines in your list. It shouldn't make a difference but as I am not at my computer right now I can't check right now if that would send a "blank" proxy to the NHSEO proxy handler and in turn search without proxies.

Also you could check the proxies using the built in proxy checker and check that they are all anonymous. I use 150 private proxies from buyproxies.org so doubt they will be leaking but running the proxy checker will ensure that your proxies are entered correctly and remove any bad entries (blank lines etc).

 

[princeA23]

What's up bro,?

I see that you're doing an amazing job with your tool and just wanted to tell that I'm really pround of you.

Keep up the good work:third:

I'm a business owner, and your software looks really interesting.

I don't want to get into all those techi things and questions.

So, I would like to know if I can fix a Teamviewer appointment with you, to correctly set my software with my business.

As soon as you're ready to give me the green light, I'll buy the software so we can start the process.

PM me

Best Regards, Prince

 

[souleclipse]

I need help,

I am using public proxy, but i always check them .
Out of 200 working proxies , only

10 passed Google, yahoo
30 passed yahoo
160 passed the anonymous only

So what setting do i choose below ? or what should i do next?

Usually i will choose check and anonymous . But it will be good if you separate the proxy some for searching some for posting. Not sure either , or it be better we can choose the setting of "Must pass google or yahoo"
You should have an export and filter function. so we could actually filter the main good proxies.

 

[jimbobo2779]

What's up bro,?

I see that you're doing an amazing job with your tool and just wanted to tell that I'm really pround of you.

Keep up the good work:third:

I'm a business owner, and your software looks really interesting.

I don't want to get into all those techi things and questions.

So, I would like to know if I can fix a Teamviewer appointment with you, to correctly set my software with my business.

As soon as you're ready to give me the green light, I'll buy the software so we can start the process.

PM me

Best Regards, Prince

I'm always happy to help out where I can and have done many TeamViewer sessions to help people get their install setup. I won't go as far as to setup the profiles for you though as you, as the user, will know far better what you want for each of your profiles.

If you want to know what something specific does there is always pop-up text explaining what every control does when you hover over any control, this is usually enough to explain what the control does or how it should be used. There is also full software documentation in the support forum, also linked from the app's Help menu, and also there are video guides, common questions + answers and other general guides in the support forum available on the support forum if there is anything you are not sure about.

I need help,

I am using public proxy, but i always check them .
Out of 200 working proxies , only

10 passed Google, yahoo
30 passed yahoo
160 passed the anonymous only

So what setting do i choose below ? or what should i do next?

Usually i will choose check and anonymous . But it will be good if you separate the proxy some for searching some for posting. Not sure either , or it be better we can choose the setting of "Must pass google or yahoo"
You should have an export and filter function. so we could actually filter the main good proxies.

If you were to check those proxies just 15minutes later you would probably see far fewer of them were still working. The built in proxy checker is not really meant to be used for using public proxies but more to just quickly check that private proxies have been entered correctly and are working as would be expected. Public proxies are always a bad idea, they are just not reliable and won't be usable for long.

If you want to use public proxies you will need a tool that is capable of harvesting and checking proxies constantly to ensure you have some usable proxies at all times, otherwise you will be running with bad proxies for the vast majority of the time. Even proxy harvesting tools are struggling more and more to find any usable proxies as so many people are trying to use/abuse public proxies these days. The most links will always come from private proxies and often no proxies at all will give far more links than running with public proxies (often even when using purpose made proxy harvesting tools).

 

[souleclipse]

Hey Jim,

Can you take a look at this



Uploaded with ImageShack.us

I start ID 1 , earlier then ID 2.
But ID 2 get more verified links. Why ?

I am using 150 public proxy with at least daily checked if there are working and refresh new proxy.
Usually 40% work with yahoo 50% work with just for posting . Sadly only 10% with google.

Here is what i going to do:
I going to filter out those working for Google / Yahoo to put on private proxies column and check the box for searching
And those general working proxies on the public proxies column and check the box for posting/pinging/PR Checking

Do you think this would work better or should i just dump everything into one ?
I have an extensive list of Public Proxies, so i don't think i be investing in private proxies any time soon .

Can I suggest that you have another option for checking proxies is that "Must Pass Google or Yahoo" so we can actually save those for searching , and the remaining to be discarded. Or you let us export the result in CSV.

I set my OBL to 250 but when i export the result there is this link : Over 12k comment.
Is there a bug?
http://www.cleaningservicenortheast.co.uk/component/k2/item/99-letting-agents--landlord-clean.html

Cheers

Thank you for a great software.

 

[benks11]

Good service

 

[jimbobo2779]

Hey Jim,

Can you take a look at this



Uploaded with ImageShack.us

I start ID 1 , earlier then ID 2.
But ID 2 get more verified links. Why ?

I am using 150 public proxy with at least daily checked if there are working and refresh new proxy.
Usually 40% work with yahoo 50% work with just for posting . Sadly only 10% with google.

Here is what i going to do:
I going to filter out those working for Google / Yahoo to put on private proxies column and check the box for searching
And those general working proxies on the public proxies column and check the box for posting/pinging/PR Checking

Do you think this would work better or should i just dump everything into one ?
I have an extensive list of Public Proxies, so i don't think i be investing in private proxies any time soon .

Can I suggest that you have another option for checking proxies is that "Must Pass Google or Yahoo" so we can actually save those for searching , and the remaining to be discarded. Or you let us export the result in CSV.

I set my OBL to 250 but when i export the result there is this link : Over 12k comment.
Is there a bug?
http://www.cleaningservicenortheast.co.uk/component/k2/item/99-letting-agents--landlord-clean.html

Cheers

Thank you for a great software.

Link number will vary greatly with the search keywords. With that said, in this instance I would guess it is more down to the really bad proxies you are using, having just 10% pass Google will massively lower the number of targets each search will return.

In cases like this you are far more likely to get lots more results (equals targets which relates to number of links made) by running with just 1 search thread and no proxies at all for searching. You can still use the bad proxies for posting but again you will be losing potential links by using bad proxies. Using limits (OBL, PR, bad words etc) will lower the number of links so I can't glean any real conclusions about other ways to improve results but by your description the proxies you are using are pretty bad and will be limiting the number of links you can create pretty badly. I would always advise people to use fresh proxies which have been checked no more than 15-60mins ago. Obviously if you are happy with the results it is your choice but the link numbers you are seeing are quite low and it is likely the proxies.

The proxy checker does test for Google and ...... ah I see what you are asking here, yeah I could probably add something like that in the next update.

As for the OBL "bug" you see, it is not a bug at all. The feature checks the outbound links on the page, not how many comments, posts or replies that post, topic, image, comment or blog has. As you can see from the page there are very few outbound links actually on the page, when I checked there was only 1 obvious OBL so it is below your OBL limit of 250.

I hope that helps some.

 

[edklop]

looks good.. any language ? (I am from the Netherlands)

 

[jimbobo2779]

looks good.. any language ? (I am from the Netherlands)

Yes you can use any language search keywords, anchor texts and comments you like.

 

[jimbobo2779]

Today I released v2.12.24.0, the update notes are as below:

â—¾Added: Periodic checking of proxies as part of posting process
â—¾Improved: Changed pop-up text for inbuilt proxy harvester

Also to anyone purchasing, if you do not see the email right away please check your spam folder. Almost daily I am getting people contacting support claiming they have not received their email when it is highly likely just sat in the spam folder waiting to be read. This seems to be mainly affecting Gmail users but it is good practice whenever you purchase or sign up for anything online to check the spam folder.

This is mentioned on the thank you page in bright read letters and again in the welcome email but I thought that due to how many seem to miss both of these messages that I would mention it here.

All account details and download instructions are sent out immediately when the payment is processed so if it isn't in your inbox within a couple of minutes check your spam folder, if it isn't in the spam folder then by all means get in touch but if this is the case please mention that you have already checked the spam folder (it will save me wasting an email suggesting you check in the spam folder).

Not a rant, just thought it warranted pointing out.

 

[thebossispro]

Is there a setting where you can also send unconfirmed links to no hands pinger ?

 

[jimbobo2779]

Is there a setting where you can also send unconfirmed links to no hands pinger ?

Currently no because you would be promoting a lot of pages that aren't linking back to you. If you don't mind me asking, why would you want to have that as an option?

 

[thebossispro]

Currently no because you would be promoting a lot of pages that aren't linking back to you. If you don't mind me asking, why would you want to have that as an option?

Simple just because the link does not show up right away that does not mean it's not there. On one of my website on NHSEO the verified links where 384 but on ahrefs it showed over 1k links. NHSEO was the only software I used so it can't be from a different source.

 

[jimbobo2779]

Simple just because the link does not show up right away that does not mean it's not there. On one of my website on NHSEO the verified links where 384 but on ahrefs it showed over 1k links. NHSEO was the only software I used so it can't be from a different source.

That is likely the result of site wide links rather than links being accepted after moderation of a successful post.