Permanently Closed Marketplace Sales Thread

[gogo1902]

Looks good

 

[schwagoo]

I didn't even do the trial. I just bought it. I figure if it works HALF as good as I have read in this thread, it will be worth it.

So far so good. I installed it on a new 2.5Ghz 1.5GB VPS on a 100mb pipe,added about a dozen sites. Put in 25 private proxies. Told it to only post on PR1+. It is churning along. CPU usage between 5-10%. The exe is only using 100-130MB Ram. At this rate I could add hundreds of sites to it.

A cool side-benefit I see is that after it runs for a few weeks, I can export my links for all sites and have a PR1+ autoapprove list load up into scrapebox.

Thanks for a niece of software. Exactly what I was looking for!

 

[solar2010]

I just bought it. Now running very smooth. So far no errors

 

[NSS777]

Hey, I installed the trial, but it is saying "Cannot find 'mscoree.dll']. Please, re-install this application.

 

[NSS777]

Running Windows Vista Ultimate 64 by the way.

 

[jimbobo2779]

Just bought it and working great so far Just a quick question, if a post fails, will it try posting on that same blog later on? I'm using public proxies (good ones though) but sometimes it'll fail because of a bad proxy, just wondering if it'll go back and try that again later on?

No if it fails it fails and moves on, there is no point in retrying failed blog posts normally as it would be a huge extra drain on time and connection with very few if any resulting in a link. There really isn't anything such as good public proxies, they all go down eventually and are unlikely to do you any favours to be honest.

I would always advise against public proxies of any kind. Private proxies or no proxies if you are looking for decent link numbers.

Hey, I installed the trial, but it is saying "Cannot find 'mscoree.dll']. Please, re-install this application.

Have you tried reinstalling it? If so and it still doesn't work try installing .NET2.0, you should already have it but there is a chance that it is somehow corrupted.

 

[-Jericho-]

Just purchased it. Really liking the ease of use of this program. Is there a way to import thousands of links with different anchors?

 

[-Jericho-]

What's the purpose of crawling? Does it do anything with the crawled pages? Do the get submitted to whois or commented links?

 

[schwagoo]

I believe is crawls the sites so that it can build links to internal pages. I could be wrong as I haven't looked at link reports yet to confirm

What's the purpose of crawling? Does it do anything with the crawled pages? Do the get submitted to whois or commented links?

 

[jimbobo2779]

Just purchased it. Really liking the ease of use of this program. Is there a way to import thousands of links with different anchors?

Do you mean into different profiles or into a single profile? If you want to import multiple profiles with different settings it isn't possible but if you have a file format that you want to import from (output from another app for example).

if you are asking about adding a bunch of pages with different anchor texts you can do this from the profile handler. For adding anchor texts along with the page in your page file use the format below:

http://domain.com/page1{([SPLIT])}Anchor text1
http://domain.com/page2{([SPLIT])}Anchor text2

This currently cannot be done diretcly when adding a multiple page profile but I a, adding the code to allow this into th enext update (coming today)

What's the purpose of crawling? Does it do anything with the crawled pages? Do the get submitted to whois or commented links?

NHSEO will crawl inner pages of your website and then will promote each inner page via comments and trackbacks. Whois sites only accept domains so NHSEO will not post any pages to the whois sites as they wouldnt be accepted anyway.

 

[-Jericho-]

Do you mean into different profiles or into a single profile? If you want to import multiple profiles with different settings it isn't possible but if you have a file format that you want to import from (output from another app for example).

if you are asking about adding a bunch of pages with different anchor texts you can do this from the profile handler. For adding anchor texts along with the page in your page file use the format below:

This currently cannot be done diretcly when adding a multiple page profile but I a, adding the code to allow this into th enext update (coming today)

NHSEO will crawl inner pages of your website and then will promote each inner page via comments and trackbacks. Whois sites only accept domains so NHSEO will not post any pages to the whois sites as they wouldnt be accepted anyway.

I have some large sites and I have a lot of links with anchors already setup for use in scrapebox. That's why I was asking if there was way to import them.

As far as the crawling goes, when you say it will promote them via comments/tb's what does it use for the anchor? Does it pull the title? Or do I still have to manually set that up for each page?

 

[-Jericho-]

http://domain.com/page1{{SPLIT}}Anchor text1
http://domain.com/page2{{SPLIT}}Anchor text2

Can I use anchor spins in this format? For example:

http://domain.com/page1{{SPLIT}}{Anchor text1|Anchor2}
http://domain.com/page2{{SPLIT}}{Anchor text1|Anchor2}

 

[jimbobo2779]

I have some large sites and I have a lot of links with anchors already setup for use in scrapebox. That's why I was asking if there was way to import them.

As far as the crawling goes, when you say it will promote them via comments/tb's what does it use for the anchor? Does it pull the title? Or do I still have to manually set that up for each page?

It will use the anchors as set in the profile unless you set a custom anchor text for it.

http://domain.com/page1{([SPLIT])}Anchor text1
http://domain.com/page2{([SPLIT])}Anchor text2

Can I use anchor spins in this format? For example:

http://domain.com/page1{([SPLIT])}{Anchor text1|Anchor2}
http://domain.com/page2{([SPLIT])}{Anchor text1|Anchor2}

Yeah you can.

Oh crap I did it wrong, please use the example below not the one above:

http://domain.com/page1{([SPLIT])}{Anchor text1|Anchor2}
http://domain.com/page2{([SPLIT])}{Anchor text1|Anchor2}

 

[-Jericho-]

Thanks.

Do you know how much bandwidth it uses with 15 threads? I've gone way over my 250GB/mo bandwidth limit in the past with comcast using scrapebox and want to make sure I don't with NHSEO.

 

[BigMarcusStud]

I'm using the trial version on a VPS and it looks promising.

Question though. When it's saying that the post is successful, does that mean that there's already a backlink? Or there's a chance that it's still waiting moderation?

I'm still running it so I haven't checked the links yet. But what are the comments that the software is posting? I don't remember seeing an option to set the comments.

 

[jimbobo2779]

Thanks.

Do you know how much bandwidth it uses with 15 threads? I've gone way over my 250GB/mo bandwidth limit in the past with comcast using scrapebox and want to make sure I don't with NHSEO.

Bandwidth really depends on quite a few things but it will be quite high, I would say to keep an eye on it yourself as it really depends on how many profiles you are running, the setting, your connection speed amongst other things.

I'm using the trial version on a VPS and it looks promising.

Question though. When it's saying that the post is successful, does that mean that there's already a backlink? Or there's a chance that it's still waiting moderation?

I'm still running it so I haven't checked the links yet. But what are the comments that the software is posting? I don't remember seeing an option to set the comments.

When a post is classed as successful it means it was successfully posted not that a link is now active on that site. The confirmed links are those that were submitted and auto approved. Comments are pulled from heavily spun comments.txt file that is bundled with the app. If a comment / trackback is not listed as confirmed it is in the moderation queue.

You can set custom comments in the Advanced profile add / edit controls (check the advanced checkbox before adding / editing) or in the profile handler.

 

[-Jericho-]

Bandwidth really depends on quite a few things but it will be quite high, I would say to keep an eye on it yourself as it really depends on how many profiles you are running, the setting, your connection speed amongst other things.

Crap I hit 318GB for the month lol. Second time in 4 months I've gone way over. Definitely gonna have to watch this program closely. Most of that was from wiki posting and SB though.

 

[whatlljk]

With all those overage charges you could probably get a cheap VPS...

 

[googlemonster]

Got like 30 profiles in it, but i cant see the ones at the bottom.

 

[l0l0]

With NHSEO you will be able to leverage backlinks from not just Whois websites but also from Blog Comments and Trackbacks. All comments are generated for you and trackbacks are dynamically generated from the website it is posting to.

Would like to see this in action first with results.
I want to see the quality and relevancy of this, so not getting "Hey! Nice post!" comments with a backlink that looks spammy.