Permanently Closed Marketplace Sales Thread

[idomo]

i am getting the error below after it has confirmed all emails and after it submits all the profiles in the scheduler.

Error in InetCpl.cpl
Missing entry:ClearMyTracksByProcess

even though it has the above error. it was still able to create profiles and perform its task.

I got same problem in a pop window

 

[pasdoy]

hey I would like to buy but i cant use paypal atm, is there anyway i can pay you directly with credit card?

 

[idomo]

I was tested last night, the results showed that all normal, the success rate of 18%, I try to login forum that registration failed in a few forums, in fact only 12% success rate, I don't know where the problem.

Also, I don't quite understand the settings Profile, because I didn't find the Signature in every forum, please walker give me an example, the following is my setting.

URL: www.yahoo.com
Anchor: Yahoo
Signature(BB Code):
{
[url=http://www.yahoo.com]keyword #1[/url]
|
[url=http://www.yahoo.com]keyword #2[/url]
|
[url=http://www.yahoo.com]keyword #3[/url]
}

Is that correct? thanks

 

[weBay]

Hi there,

been messing about with the software for a few days now. won't leave a review yet as I am still experimenting.

One quick question though.. How do you find the created profiles? I know it is in the 'log' section but I am not sure exactly what I am looking for. I have run the software a few times and at the the end of submitting profiles the log list says "Profile List:" and then a number. Is this number the number of created profiles?

I hope this is clear...

 

[peter73]

I can't login. Says, webservice is down try again... Tried accessing Profile Link Robot's homepage and it says Problem Loading Page... Hmmmmm.......

 

[bluegarden]

same situation here, i can't login to the server.

 

[pasdoy]

first time use, 50% sucess rate.
This toll is SIMPLE! if you cannot use it, read the damn guide.
You don know what bbcode is, go on google.
You get a 12% sucess rate? You used a common username, hadnt a good bbc
Problem with pop up? Use a killer that will kill every window with Internet Explorer on it
Cannot find the profiles? check on the log al lthe profile links are there after a submition it looks like this: Forum Links ===>

Cmon guys....

 

[idomo]

You get a 12% sucess rate? You used a common username, hadnt a good bbc

Cmon guys....

Thank you guys, maybe you're right, the user name already registered. But my user name is mixed with numbers and characters, and longer than 8 characters, less likely to repeat.

I think it might be other reasons, such as public proxies or using Gmail

 

[tgarmon]

all I get are software errors and I have all the necessary .net4 files installed.
I was excited to get this. I hope they can get me working. Otherwise a refund is in order.

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.FileNotFoundException: Could not load file or assembly 'ChilkatDotNet4.dll' or one of its dependencies. The specified module could not be found.
File name: 'ChilkatDotNet4.dll'
at ProfileLinkPro.ControlForm.btnPop3Test_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)




************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
ProfileLinkPro
Assembly Version: 1.2.0.0
Win32 Version: 1.2.0.0
CodeBase: file:///C:/Program%20Files/ProfileLinkRobot/ProfileLinkRobot/ProfileLinkPro.exe
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 10.0.0.0
Win32 Version: 10.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.ServiceModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
----------------------------------------
System.Runtime.DurableInstancing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.DurableInstancing/v4.0_4.0.0.0__31bf3856ad364e35/System.Runtime.DurableInstancing.dll
----------------------------------------
SMDiagnostics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.WorkflowServices
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.WorkflowServices/v4.0_4.0.0.0__31bf3856ad364e35/System.WorkflowServices.dll
----------------------------------------
System.ServiceModel.Web
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Web/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Web.dll
----------------------------------------
System.ServiceModel.Discovery
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Discovery/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Discovery.dll
----------------------------------------
System.ServiceModel.Activities
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Activities/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Activities.dll
----------------------------------------
System.ServiceModel.Routing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Routing/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Routing.dll
----------------------------------------
System.ServiceModel.Channels
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Channels/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Channels.dll
----------------------------------------
System.Runtime.Serialization
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
----------------------------------------
System.IdentityModel
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.IdentityModel/v4.0_4.0.0.0__b77a5c561934e089/System.IdentityModel.dll
----------------------------------------
System.Management
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
Accessibility
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
Microsoft.mshtml
Assembly Version: 7.0.3300.0
Win32 Version: 7.0.3300.0
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

 

[bluegarden]

when will the service be fixed. i still cannot login to Profile Link Robot and use this software.

 

[india]

I can't login. Says, webservice is down try again... Tried accessing Profile Link Robot's homepage and it says Problem Loading Page... Hmmmmm.......

I had trial login but I never been able to login to the PLR. Authentication system doesnt look good but the software features are awesome. Its unfortune to not able to try this software

 

[weBay]

first time use, 50% sucess rate.
This toll is SIMPLE! if you cannot use it, read the damn guide.
You don know what bbcode is, go on google.
You get a 12% sucess rate? You used a common username, hadnt a good bbc
Problem with pop up? Use a killer that will kill every window with Internet Explorer on it
Cannot find the profiles? check on the log al lthe profile links are there after a submition it looks like this: Forum Links ===>

Cmon guys....

I've been messing around with the software for a couple of days now when I get a spare hour or two. I really like the software and can see its potential. Unfortuantely I havent had a full day to really understand this software so I am still a bit confused,

I cannot find "Forum Links ===>" in the log at all!! My successful links are shown as "===> Profile List: 5" ??? can anyone shed light on this?

I checked my emails and I had more confirmed profiles than was in the Profile List in the log. However they were either banned already or were confirmed but did not have the signature in place. They did have the home URL though so still a backlink.

I still have not got my head around this software yet. Sorry for being a bit slow but I have some questions, I would REALLY appreciate help with:

Do forums get automatically removed from the scheduler once everything has been completed? Eg confirmed email, signature added etc...

Do you have to keep on hitting 'submit profile' until the scheduler is empty? Or do you just do it once, then see which ones work (in the log) and then delete the rest and start a new project?

I am sure I am missing something but like all these things they are only simple once you get your head around them..

 

[pasdoy]

I am waiting for the seller to tell me if he has a way to pay him other than paypal, after this I will be abble to help everyones out

 

[marcoscane]

super cool software, it help a lot..

 

[tgarmon]

I initially had an issue with the install. Basically I was so excited to get started that I didn't notice I needed to install 2 windows addons. After doing so I had a smooth install, login, and both decapcher and death by decapcha.

I currently have this installed on a laptop and running a meager 5 threads. It has had great success rate. I am not dumping all sites on the list at once, but dropping 200 at a time and letting it run and re-run. Currently I am on number 257 out of 380 in this particular batch and it has been running 1 hour 21 minutes at 5 threads. I have to say that I am impressed with this piece of software. I have not added the sites to the scheduler for profile building. I will likely run them all at once after scraping some EDUs of my own and get a few more. Presently I have well over 1500 registrations:cowboy:. 420 that!

I have a spreadsheet of other edus I signed up for that I would like to add to this lists that the software can keep the profiles active, and even rotate signature links from time to time. Personally I do not see myself using the scheduler, although this is nice, but I am very happy with Linklicious.me service for drip feeding links to rss feeds automatically. I also purchased 2 licenses for scrapebox and consider PLR to be a nice addition to my high value low cost arsenal.

Also, it would help to have the right footprint for scraping govs and edus Presently I am using site:.edu is the top window and the folloing for keywords:
"Powered By Bulletin"
"Powered By MyBB"
"MyBB Group"
"Powered by SMP"

David responded to my issue in a very timely manner and my experience thus far is very satisfactory. I do hope that additional forum formats would become available, even if it is as an upgrade.

Also, I am using 13 private proxies at a cost of 22.00 per month or so.

Addition to original post:

Okay, I have finished registering to all of the forums on the list. I repeated the failed ones a couple of times. All in all I have successfully registered at 2032 forums! That's impressive to me. I have not yet submitted profile links, but I confirmed all emails with the software and that went well. Upon registering to some of the forums, welcome messages came in and it slowed down the confirmation process. So, i logged into the pop 3 and sorted and deleted all emails not related to activation in the subject. Most all had "Welcome" in the subject; so no big deal.
Posted via Mobile Device

 

[walker]

I've been using this program for three days now. I'm only doing 100 posts a day and on average only 25-30 are successful. I'm not using any proxies. So far I've created around 70 profile links. Is it bad for SEO not to use proxies when creating profiles? I just logged into Google webmaster tools and it shows "No data available". Is it possible that Google noticed I was creating all these profile link and delete my backlink stats? Maybe I'm just being paranoid but I don't want to get sandboxed from Google as the site I'm working on makes a decent amount of money. How important are proxies when posting profile links? Thanks.....

if you are using random list, 20%-30% is normal. You should always use proxy, and you should always use fast proxy.

for 20-30 links per day, google will not sandbox you based on my experience.

usually, google will not show link very quickly. you can stilll use yahoo to check it for now. and you need check google (maybe bing too) for your site's rank for the keywords your link uses.

 

[walker]

1. Is the following spin format under Signature field ok?
e.g.

[uxl={hxxp://site1|hxxp://site2|hxxp://site3}]{yahoo1|yahoo2|yahoo3}[/uxl]

.

Yes, it is fine. but

[uxl=http://{site1.cin|site2.com|site3.com}]{yahoo1|yahoo2|yahoo3}[/uxl]

will have problems for verifying the generated links after submitted profiles.

Can you further explain visit site feature? I selected "visit site" and then click "add to scheduler". The sites all added to scheduler, but there is nothing happen then. So how can I visit all the sites with a click of mouse?

visit site means the robot will login sites and do nothing. usually, it will generate a link from homepage point to your profile. so, once your profile links are added, this will make the links get indexed (with more probability).

This apps is pretty fast and easy to use. I use the default forum list and I can register to around 1K forum(2.5K in the list). So that's fine for me. How can I know it? When I add sites to scheduler, I only see around 1K sites being added, is it the correct way to see how many sites got registered? But I think it should be more than that, since I only see 2-3 sites missing username and password per page under the sites section, all other sites got username and password. Just don't know why PLR only added 1K sites to the scheduler.

You need check the checkbox in front of the sites.

 

[Marcink99]

I have about 100 links that I want to build links for how do I set it up?

Is their an option to just put all the links or do I have to {|} all my links with keywords?

How can I set it up to put 3 links in signature box?

How many links should I put in signature box?

 

[tgarmon]

I want to know the exact same thing. I usually fit 4 links in the profile. I don't want to spin links for profile either.

 

[walker]

I have about 100 links that I want to build links for how do I set it up?

Is their an option to just put all the links or do I have to {|} all my links with keywords?

How can I set it up to put 3 links in signature box?

How many links should I put in signature box?

you will need use {|}. since each url may have different keywords, so, there is no simply click way to do this (at least you need input url & keywords anyway).

you can put something like:

this is my keyword1, and this is my keyword2, and then this is my keyword3

so, it will have 3 links.

you can put as many as you want, but I will not do that. At most, I will put 2 links. In most cases, I will use just 1 link. but it is upto you.