Creating my own 4g proxy network

007accs

Power Member
Joined
Nov 19, 2014
Messages
594
Reaction score
88
So I searched a bit and found a nice offer 4g USB for just 7 euro with tarif already in it (USB is free from them limit 1,5gb which is enought for me). I need exactly 10 of them. My question is how can i turn them into 10x proxy? I have been reading and i need like raspberry pi with 10 usb slots? After that I connect those 10x usb and setup inside raspberry to work as proxy for each of those USB the raspberry running 24/7 and use those proxies on my VPS in jarvee? It is correct or am I completely wrong? THX
 
Or actually buy 10x USB with 4g tarif and 10x cheapest raspberri pis and setup each of them like this:
add username and pass in config and run those PIs 24/7 on some good spot where USBs get good signal. Could this work actually or is it possible to do this on just 1 raspberri?
 
There were professional who used to send Raspberry PI with 3g modem for a monthly rent to run a network of proxy servers. Sorry i am not able to recall what service it was.
 
There were professional who used to send Raspberry PI with 3g modem for a monthly rent to run a network of proxy servers. Sorry i am not able to recall what service it was.
But i guess it was very costly. Here if I count right i can use raspberri zero which costs 10 euro + 7 euro per USB. Thats 17 euro first time cost and I can run 10-15 ig accs. Next month the expense is only 7 euro. Well what is better rent 4g proxy which is spammed by other ig users and costs 50 usd a month or this solution. If buying 10x raspberri and 10x USB 4g local mobile net can work like I writed above i will try it
 
It is possible to run multiple 4G dongles in one RPi but the development is going to cost you more than the 10 RPi
How so? Its not possbile to configure it somehow just in squid?
 
How so? Its not possbile to configure it somehow just in squid?

Sure, you can do it with squid. You need to set backconnect proxy, I've done this with IPV6 but it should be the same thing.

You buy an IPV4 simple proxy only for use as a gateway with a specific port and you can configure it for using the dongle connection.

You should study this part searching on Google because is not easy, but you can do it!
 
Sure, you can do it with squid. You need to set backconnect proxy, I've done this with IPV6 but it should be the same thing.

You buy an IPV4 simple proxy only for use as a gateway with a specific port and you can configure it for using the dongle connection.

You should study this part searching on Google because is not easy, but you can do it!
Ah so i cant use USB 4g directly i mean setup like it is in video? I must use it throught IPV4/6 proxy?
 
Ah so i cant use USB 4g directly i mean setup like it is in video? I must use it throught IPV4/6 proxy?

I don't know exactly how to do it, but if you can insert the 4g dongle, assign 4g connection to a VPS on your pc (or RasperryPi) and then use as a gateway an IP like 23.123.123.123:2300 you should access to your 4g connection externally.
 
I don't know exactly how to do it, but if you can insert the 4g dongle, assign 4g connection to a VPS on your pc (or RasperryPi) and then use as a gateway an IP like 23.123.123.123:2300 you should access to your 4g connection externally.

That is. OP will need a gateway ip:port because most of the 4G ips are not public. So he can not run proxy directly on a 4ip:port
 
In other words i wond need to buy ipv4 proxies right? :D
 
4G proxy can be created a lot, but in the local network. I had information, but not in English, when translating it will be difficult to deliver correct information.
So I made myself 10 of these 4G proxies
 
I was digging in it a little bit and wondering if i could buy just USB hub with 10x usb slots then buy 10x USB 4g dongles connect it to my pc throught that hub and load ccproxy and configure 10 proxies from those 10 USBs. So the pc would run 24/7 with that hub and i could acces those proxies from anywhere in the world. What do you think could this work? This is I think the easiest method to do that but only if its possible to configure 10 different connections from 10 USB dongles in ccproxy. THX
 
I was digging in it a little bit and wondering if i could buy just USB hub with 10x usb slots then buy 10x USB 4g dongles connect it to my pc throught that hub and load ccproxy and configure 10 proxies from those 10 USBs. So the pc would run 24/7 with that hub and i could acces those proxies from anywhere in the world. What do you think could this work? This is I think the easiest method to do that but only if its possible to configure 10 different connections from 10 USB dongles in ccproxy. THX

That may work if you '10x USB 4g dongles' will not interfere each other' data transfer.
 
I was digging in it a little bit and wondering if i could buy just USB hub with 10x usb slots then buy 10x USB 4g dongles connect it to my pc throught that hub and load ccproxy and configure 10 proxies from those 10 USBs. So the pc would run 24/7 with that hub and i could acces those proxies from anywhere in the world. What do you think could this work? This is I think the easiest method to do that but only if its possible to configure 10 different connections from 10 USB dongles in ccproxy. THX

It depends on how much data can you buy? How much does it cost? Otherwise may be cheaper to buy from a supplier.
Creating mobile proxy isn't an easy task, especially if it's more than 1 proxy on 1 device.
 
It depends on how much data can you buy? How much does it cost? Otherwise may be cheaper to buy from a supplier.
Creating mobile proxy isn't an easy task, especially if it's more than 1 proxy on 1 device.
7 eur 5gb for month
 
hm another solution would be installing 9 wmwares and every wmware connect to their own 4g USB internet and then run ccproxy on each of them. However i dont know if its possible to configure for each wmware to use 4g dongle
 
Back
Top