article marketing robot - article can contain hyper linking?

txholdem

Elite Member
Joined
Feb 23, 2009
Messages
1,834
Reaction score
236
Can someone help with this simple question?

I am trying to use AMR to write articles, and I am not sure about the hyper link. I imagine that I cannot put a link with anchor text in the article as many of the article sites might not allow it?

How do you usually do it? especially when using AMR?

if no links are accepted, wouldn't that be not so good for linking purposes?

thanks in advance.
 
Last edited:
You should put your link in the article bio box.

I haven't tried it myself, but many on BHW say you can put your links in the article body and get accepted by many article directories.
After doing the first submission with links (2 - 3) in the article body, they go back and take out the links (except for the author box) and resubmit to all the sites that failed.
 
yes, u can put a couple of links in the article itself. some directory will not accept html in their article that is why you will fail some.

after that delete those and leave a link in the article resource box at the end of amr. that one will stick. i will have 2 there; one to the main url and the other the specific url. in that way main url will get a bl as well.
 
yes, u can put a couple of links in the article itself. some directory will not accept html in their article that is why you will fail some.

after that delete those and leave a link in the article resource box at the end of amr. that one will stick. i will have 2 there; one to the main url and the other the specific url. in that way main url will get a bl as well.

btw, i do not see anywhere I can get the URL of the submitted articles? if so, how do I build links for those articles? supposedly i should get links for the links (articles)?
 
btw, i do not see anywhere I can get the URL of the submitted articles? if so, how do I build links for those articles? supposedly i should get links for the links (articles)?

Under the Select Targets Tab with the list of Directories, right click, Reports, Live Links.

As for hyperlinking in the article, you should see on the list of directories which ones accept url's in the article and which don't; something like 'HTML Disallowed In Body/Summary'.

For those article directories, I move my URL from the article to the resource box.
 
Resource box is the best place to put your link.
Your article body can surely contain links but it will dramatically decrease the approval rate which is not what you want :)
 
put a few links in the resource box then run it a 2nd time with one link

you should pick up another 50-100 that way
 
Hi, I check the AMR website but couldn't find any answer to my question. Does it work fine with forein languages such as spanish, german or french ? If users could let me know will be great :) Thx
 
Under the Select Targets Tab with the list of Directories, right click, Reports, Live Links.

As for hyperlinking in the article, you should see on the list of directories which ones accept url's in the article and which don't; something like 'HTML Disallowed In Body/Summary'.

For those article directories, I move my URL from the article to the resource box.

thanks for the tip.

so far my 1st try, the results do not look so astonishing:
out of 4300 sites, only on 1000+ sites (fewer than 25%) I get to successfully submit the article.
Out of the submitted, only 398 shows a live link.

so less than 10% of the article sites are successful. it cost me 3 hours plus just to enter the captcha manually!

i was able to resubmit the article with no link, but was unable to fix the "invalid summary" and "category mismatch" errors. changing categories yields very few success.

I guess 400 article links is a lot better than nothing..

So what do you do after getting the links? other than pinging? do you see a lot of good coming out of the article links?

thanks
 
Under the Select Targets Tab with the list of Directories, right click, Reports, Live Links.

As for hyperlinking in the article, you should see on the list of directories which ones accept url's in the article and which don't; something like 'HTML Disallowed In Body/Summary'.

For those article directories, I move my URL from the article to the resource box.

thanks for the tip.

so far my 1st try, the results do not look so astonishing:
out of 4300 sites, only on 1000+ sites (fewer than 25%) I get to successfully submit the article.
Out of the submitted, only 290 shows a live link! thats a very low success rate!

so less than 10% of the article sites are successful. it cost me 3 hours plus just to enter the captcha manually!

i was able to resubmit the article with no link, but was unable to fix the "invalid summary" and "category mismatch" errors. changing categories yields very few success.

I guess 290 article links is a lot better than nothing..

So what do you do after getting the links? other than pinging? do you see a lot of good coming out of the article links?

thanks
 
anybody can help with the question:

do i need to use proxies for AMR? I do not see any settings in it where i can set a proxy. So I suppose i will need some kind of SOCKS proxy?

will give thanks.
 
ya i was wondering the same thing, is there a way to use proxies if i will be submitting articles few times a day
 
put a few links in the resource box then run it a 2nd time with one link

you should pick up another 50-100 that way

I think this is an excellent point. Ppl should take note of this.

I have a question - anybody know a good way to fix category mismatch results?? I'm getting a lot of successful submits, but I'm also getting quite a few category mismatch results. I went into one of those that disapproved of my article, and it had a category of "Healthy Living" and one of my categories was "Health", which I thought AMR would automatically update an abbreviated category to fit with something close but longer. Anybody have any thoughts? Thanks!

Bonus :cool:
 
I have the same question.

to clear for me :) Can i put in my text in AMR my HTML link with the <a href... tag inside my article i want to spread?
 
if i have a list of 10 urls i want to use AMR on, how would i add all of these in the resource box or article body and have it randomly select one each time?
 
Can someone help with this simple question?

I am trying to use AMR to write articles, and I am not sure about the hyper link. I imagine that I cannot put a link with anchor text in the article as many of the article sites might not allow it?

How do you usually do it? especially when using AMR?

if no links are accepted, wouldn't that be not so good for linking purposes?

thanks in advance.

You can separate the different formats that support hyperlinking and just use those for hyperlinks and use the resource box for ones that don't. For example: Wordpress supports hyperlinks in the text. Run all wordpress sites by itself with hyperlinks.
 
there is a great guide on how to write and submit articles in amr that is better and more informative than any of the answers you have received here.

had you used the search function, like a SEARCH engine professional would be expected to, you'd have located it.

ps. it's in the upper left

Read it, you're welcome
Code:
http://www.blackhatworld.com/blackhat-seo/black-hat-seo-tools/320030-amr-tips.html
 
Last edited:
Back
Top