Permanently Closed Marketplace Sales Thread

[swords12]

Sales Thread Update

This sales thread has been permanently closed!

Original sales content and contact information have been removed to protect our members
and maintain the quality of the Marketplace.

Click here to find active and tested Proxy services!

Check out our Marketplace Rules if you wish to become a seller in our Marketplace.​

 

[BHW-News]

---- THREAD CLOSED 05/18/2015 ----
OP Approved
Works just as described, with some good instructions.

 

[Daswebrofl]

I signed up for the 10 ports, let's try this out

 

[DoubleD3]

Your service seems promising.. Will give it a shot.. Best of luck on sales..

 

[Shaunm]

Will these proxies work for posting to sites in GSA SER?

How exactly does this work? I'm guessing the ports are the simultaneous connections to you and you alternate the proxies on your end?

Would these work for Scrapebox scraping and GSA SER posting at the same time?

 

[swords12]

Will these proxies work for posting to sites in GSA SER?

How exactly does this work? I'm guessing the ports are the simultaneous connections to you and you alternate the proxies on your end?

That's exactly how it's done .

Would these work for Scrapebox scraping and GSA SER posting at the same time?

Yep, as long as you don't exceed your total thread count that you are allotted. If you buy the 10 port plan, you get a total of 100 threads you can use, so you just need to split those up appropriately between the 2 softwares.

These proxies work 'good' for GSA SER, but by no means will I proclaim they are 'great'. They're a tad slower than your typical private proxy, but the MAJOR benefit you get with them is that they are constantly rotating and they're not overused like other backconnect proxies. The proof is the speed in which they can scrape Google. If a proxy service can scrape Google 24/7 without flinching, you know they're quality proxies .

Just give it a try with the 5 or 10 port trials to see if they work for your purposes

 

[qlithe]

I get "Error adding IP" when I try to add my own IP to the Authorized IPs

 

[swords12]

I get "Error adding IP" when I try to add my own IP to the Authorized IPs

You must have a package first. The trials can be found on the left bar as well.


NOTE TO EVERYONE: I cannot post here more than once a day for support - so if you have any questions at all please PM me or open a ticket at http://banditim.com/support

Thank you

 

[turbopugsleylx]

Hey guys....

I have aver worked with Swords in the past for probably a year....he is an upright dude to deal with in every one of our probably 50+ dealings....I have no doubt this will be just as good!

Will be testing things out over the next 2 weeks or so and I will report back how things go...I will be mainly using it for scrapebox....

Turbo

 

[phatzilla]

any coupon codes?

 

[Namun]

Well, the average latency seems to be around 5+ seconds and the proxies are extremely slow.

Not sure what's the point in offering 10 threads / proxy when even single-threaded is very slow.

 

[swords12]

Hey guys....

I have aver worked with Swords in the past for probably a year....he is an upright dude to deal with in every one of our probably 50+ dealings....I have no doubt this will be just as good!

Will be testing things out over the next 2 weeks or so and I will report back how things go...I will be mainly using it for scrapebox....

Turbo

Thanks Turbo, glad to have you on board

any coupon codes?

Sorry, not now unfortunately.

Well, the average latency seems to be around 5+ seconds and the proxies are extremely slow.

Not sure what's the point in offering 10 threads / proxy when even single-threaded is very slow.

When people bring this up I always ask them: what would you rather have, results or speed? Sure, you can buy private proxies and have .5 second latency, but what results is that going to give you in Google? Your proxies will be banned within an hour at any decent speed . With mine, since we're always rotating you, you're not going to get banned and that is worth the extra latency (at least if you're a Google scraper... things like GSA SER may not be the best suited for my proxies since you look more for speed on that software).

 

[gigismo]

Hi,
I bought the 25 ports package...after 2 weeks of scrapping 24-7 here is what can i tell you:The speed is decent 10k-30k urls per min using gscraper at 150 threads ..speed depends a lot on the footprint....i'm getting 2 to 4 mil unique urls per footprint (total results are usually 10-15 million urls) .Takes about 12-14 hours to burn 110.000 keyword list .Overall i'm pretty happy with the results so far ,i tried lots of providers from bhw forum...this is one of my top3 providers for scrapping !For the service he offers price is decent
proof:
.

 

[Shaunm]

I followed the tutorial and have threads set to 10 as I am using the 10 port package and after the first minute I am getting an average of only 1 URL a second with alot of errors.

I am guessing I have messed up somewhere but I have set up scrapebox as best I can tell from your tutorial and none of my footpriints are inurl:. When I test them with scraping keywords I usually get 0 Keywords a second and sometimes 1.

Any ideas?

Cheers

Shaun

EDIT

I worked this out myself but decided to leave this in the thread to help other people, Scapebox V2.0 has an option to use server proxies within its harvester that seems to be turned on by default. This is not in Scrapebox V1.0 so it threw me. If it is turned on it seems to override all proxy settings and force you to use the scrapebox server ones. If you have a similar problem to what I had then go do the following.....

Open Scrapebox -> Open Harvester -> Click Proxies near the bottom right -> deselect "Use server proxies"

After doing this everything seems to be working fine, I am running with the free trial of 10 ports with 30 threads open getting around 55 URLs a second. I plan to upgrade to the 25 port plan tomorrow and test the service before leaving a full review but so far it seems well worth the money

 

[swords12]

Hi,
I bought the 25 ports package...after 2 weeks of scrapping 24-7 here is what can i tell you:The speed is decent 10k-30k urls per min using gscraper at 150 threads ..speed depends a lot on the footprint....i'm getting 2 to 4 mil unique urls per footprint (total results are usually 10-15 million urls) .Takes about 12-14 hours to burn 110.000 keyword list .Overall i'm pretty happy with the results so far ,i tried lots of providers from bhw forum...this is one of my top3 providers for scrapping !For the service he offers price is decent
proof:
.View attachment 61764

Thanks for the review and the proof screenshot!

I followed the tutorial and have threads set to 10 as I am using the 10 port package and after the first minute I am getting an average of only 1 URL a second with alot of errors.

I am guessing I have messed up somewhere but I have set up scrapebox as best I can tell from your tutorial and none of my footpriints are inurl:. When I test them with scraping keywords I usually get 0 Keywords a second and sometimes 1.

Any ideas?

Cheers

Shaun

EDIT

I worked this out myself but decided to leave this in the thread to help other people, Scapebox V2.0 has an option to use server proxies within its harvester that seems to be turned on by default. This is not in Scrapebox V1.0 so it threw me. If it is turned on it seems to override all proxy settings and force you to use the scrapebox server ones. If you have a similar problem to what I had then go do the following.....

Open Scrapebox -> Open Harvester -> Click Proxies near the bottom right -> deselect "Use server proxies"

After doing this everything seems to be working fine, I am running with the free trial of 10 ports with 30 threads open getting around 55 URLs a second. I plan to upgrade to the 25 port plan tomorrow and test the service before leaving a full review but so far it seems well worth the money

Thanks for coming back in Shaun and helping everyone else out that might find this, glad they're working great for you now

 

[swords12]

More proxies being added to the pool tonight to increase speeds by double

 

[swords12]

New IPs added to pool, success greatly increased.

Another exciting announcement I want to make is that sometime next week we will finish up our "fail-safe" algorithm. This will, in a nutshell, test all the proxies to see if they connect to a certain website, every 5 minutes. If the proxy fails to connect to our test website, then we will throw out that proxy and not deliver to any of our users. On top of that, if a proxy that is assigned to you gets tested by our fail-safe check and is dead, your proxy will automatically be replaced with a proxy that is currently alive!

 

[mikey29]

impressive bro

scrapebox i got like 15 (not thousand)



gscraper 5-10000

will take screenshot later busy

this was 10 port triall. I almost canceled

update: few hours later it seems the average is 300-400 every once in awile it goes past 1000. I am still happy with it because i was buying proxy software just for google pass but none could only a handful that would burn out fast

 

[THUNDERELVI]

What's the port:thread ratio? 1:10?
In other words, for each port, how many software threads can I run for scraping? Let's say in SB...

 

[mikey29]

i think 2-3x to be safe

10x max

check loopline video