[GET] X-Spinner - Standalone Spin API - Goodbye to those Spin API Subscriptions!

xspinnerprob.jpg

This happens every few hours. Always when x-spinner ate 1.4gig or more i even gave the vps 2gig more ram .. but as soon as the app reaches that amount .. it's over ,(
 
hmm .. pitty ...this would be such a nice software if a ser power user could use it without babysitting it every hour
 
Any good (updated) videos showing how Xspinner works in GSA? Anyone?
 
My experience thus far has been opening the program, then it prompts you there's an update, Yes will activate the updates, No will close the program. Click yes and the updates begin then an error always occurs and prompts you if you want to close it down or continue. Click continue and the update window appears and the updates never finish. I've started an update at 9pm close my VPS, come back at 9am the next morning and it's still "updating". The program just never gets past this so called update. I took a screenshot, hopefully it'll show heredwrqmf.png
 
My experience thus far has been opening the program, then it prompts you there's an update, Yes will activate the updates, No will close the program. Click yes and the updates begin then an error always occurs and prompts you if you want to close it down or continue. Click continue and the update window appears and the updates never finish. I've started an update at 9pm close my VPS, come back at 9am the next morning and it's still "updating". The program just never gets past this so called update. I took a screenshot, hopefully it'll show hereView attachment 58471
I have the exact same problem. Any fix for this?

Thanks in advance.
 
The app runs nice until it ate up too much ram .. and since i guess the memory handling got some "bugs" (maybe forgot to close some running streams or whatever they did so the software is not able to free the ram again) ...hope this gets fixed finally ... i even struggl to write a app that restarts it and uses winapi to find that window or using reflection to restart it ... very pitty
 
At the current state i call it C-Spinner for Crash-Spinner instead of X-Spinner .. doh hope that gets fixed the update to 3.2 diidnt make any difference to 3.0 btw
 
Hi Cecil Dee and eveneven, you need install and enable microsoft .net3.5 on your system, then it will work for you.

KayKayKay, I was too busy on something else, so didn't update in past 2 weeks. I will check it and make an update after the Xmas.
 
Not sure why so many of you are complaining about crashing. I've tried this both on my VPS and my machine and it works just fine right out of the box. The systems are win 8.1 with framework 3.5 installed and 8gb ram. Checked task manager and it doesn't take up much ram or has any issues with it. Actually I've had it running for 3 days now non-stop without any issues at all.

I think this is such a great tool and a very innovative idea for a spinner. I had spinnerchief ultimate and wordai before. Wordai produces very good results as we all know, but it was extremely slow for me. Especially their turing spinner which is their main thing. Spinnerchief was almost if not as good as wordai, however lately they had some bugs and so I got X-spinner. Boy was this a good decision. It's actually the engine of spinnerchief, but a local desktop version! Do you realize the power of this?? You can run this on one server and use it's api through your network if you like on as many pcs you want and whatever software you need. And the speed is unbeatable! Since you have it locally it is superfast!

I'm using it in SEO Content Machine mostly now which has built in support for, but if you software does not have built in support for X-Spinner it can simulate any of the famous spinner APIs like wordai,spinrewriter etc.. This thing here is a unique approach to spinning and it's kinda huge in the eyes of those who can see and understand it's capabilities.
 
Thanks very much spiritfly. Yes, X-Spinner is a totally new concept, so it takes a while for people to get used to it. But there really is no need now for people to use other spin api's, X-Spinner makes them all redundant, nothing comes near it.
 
Hey I am sorry if this question sounds dumb to you, but I don't get what the software is supposed to do.
Are you saying that the software provides wordai api for free to us? How? Doesn't that cost a lot of money per month?
Or it provides its own spin functions through an api? If yes, how do they compare to wordai? I have tested most of spinners out there and 2 are the best: TBS (for manual spinning, can't beat the huge thesaurus that has been created by users over the years there) and wordai for automatic/semi-automatic spinning.
I don't get the relation of X-spinner with TBS/wordai.
Thanks!
 
X-Spinner is a spinner on it's own and has nothing to do with WordAI or TBS. The difference with X-Spinner and most if not all currently available spinners is that it creates your own API so you can use it however you wish. WordAI for example is completely online solution and provides API to use with different software and therefore it is charged monthly. If you run out of credits there, which can happen easily since their Turing Spinner API usage has quite a low limit, you are charged additionally. TBS also provides an online API(which is hosted on their servers and it is charged extra) to be used with any other software which supports it's API. TBS also offers a desktop version of their software to be used, but that only downloads their treasurers and to be able to spin you have to do it in that desktop software. Again, if you want to do it in any other software, you have to use their API which is charged extra. And all spinners who provide online API(and I believe all of them do) charge something extra for that API usage, or they limit the number of API calls, which is understandable since you're using their servers to spin content.

The difference with X-Spinner is that you are getting an API which is downloaded and hosted on your own desktop PC! This means no extra charges for using the API in any other software like (SEO Content Machine, Kontent Machine etc..) You can fire up and use X-Spinner API's however you wish and spin as long as your desktop CPU can handle! :) And all of that with the quality of ..well I could say equal to WordAI if you use the Elite option, but that is debatable. It certainly is pretty much close though, much better than any other spinner I've seen for sure, so if WordAI is #1, X-Spinner is definitely a #2 that's for sure. It really does generate great spins that make me very happy and it does that EXTREMELY FAST since everything resides on your own PC, unlike WordAI's turing which can be quite slow for spinning larger quantities of content.

And the other great thing about X-Spinner is that it can simulate any other API: TBS, WordAI, SpinRewriter etc.. This means that if you have a software which can only handle TBS API for example and you own only X-Spinner, you can make X-Spinner simulate the TBS API and use it in that software which only supports TBS. So that way you won't have to buy TBS and pay for additional API calls, AND you get much better quality spins!

I hope I made it clear to some folks what this does and how an interesting approach is to spinners. For a fixed life-time fee it's definitely worth owning it, such a great tool to have in the arsenal. Cheers!
 
Last edited:
Just to try and make this clearer:

X-spinner is a self-contained API that works on your own PC, it doesn't make calls to a server like all other APIs, which means that there is no need to charge for using it, because you are not using valuable server resource, you are using your own PC.

It uses SpinnerChief's spin engine so you know that you are going to get great quality spins, and it is very fast, because the API is on your PC, it is not operating in the cloud somewhere in outer space.

That's great, but what if your SEO software developer hasn't added the X-spinner API to your software? You have to write to the developer and ask him to write some new code to add the X-Spinner API, right? Wrong! We have coded X-Spinner so that it can use the codec of all the major spin APIs. As long as there is some sort of spin API in your SEO software, X-Spinner can hook up to it. It's not just clever, it's a game-changer.

Hope that's clearer. What are you waiting for?!!!! :)

...TBS (for manual spinning, can't beat the huge thesaurus that has been created by users over the years there) and wordai for automatic/semi-automatic spinning...
I couldn't let this go without saying that SpinnerChief is better at both of these tasks, and it's literally ten times faster than WordAi.
 
Back
Top