Permanently Closed Marketplace Sales Thread

[marcin_polska]

You can use the capchaBreak.
Take for fun CB and see. $ 9.99 in Licorne AIO ;-)

 

[dumaharyanto]

another suggestion

can you add mass email activation scheduler?

maybe every 20 minutes it will automatically check email activation.. i think this is really important

 

[licorne101]

<p>
I have heard about this..unsubscribed to SENuke so I need a replacement bad...will look into this!</p>
<p>
ALso can we use Captcha Breaker with this???</p>

Yes LAIO has native support for GSA CB.

another suggestion

can you add mass email activation scheduler?

maybe every 20 minutes it will automatically check email activation.. i think this is really important

I'm not sure if I understood your suggestion correctly, but if LAIO is made to repeat email activation for all emails every 20 mins it can be a potential waste of network resources and possibly lead to a DDOS attack on the disposable mail server.

 

[naskootbg]

EMD checker not works properly! Please, check and fix!

Thank you!

 

[meinewelt]

overall it seems people are pretty happy with it, and there is a very nice and friendly support.

does the tool also support german language submissions, maybe even scraping?

and the most important question, i see in the forums the admin is sending out lists with sites for the software, does it mean the good lists are not included and you have to ask around for them?

 

[licorne101]

EMD checker not works properly! Please, check and fix!

Thank you!

Seems to be working fine at the time of writing. In what way it is not working for you?

overall it seems people are pretty happy with it, and there is a very nice and friendly support.

does the tool also support german language submissions, maybe even scraping?

and the most important question, i see in the forums the admin is sending out lists with sites for the software, does it mean the good lists are not included and you have to ask around for them?

Yes most of our users are happy with their purchases.

LAIO supports foreign language submission, but as far as scraping is concerned, it only support scraping English article directories at the moment.

If you are one of the LAIO users you will also receive the list (or rather a much better list) in the next update.

 

[naskootbg]

Seems to be working fine at the time of writing. In what way it is not working for you?

It find over 30 EMD, but all of them was taken from over 1 year. On computer restart I get the same results.

 

[MatthewWoodward]

If I'm using v3, why do we still need to use previous verions for certain features.. ex. fact finder on v1...when will this change? I'm not knocking the software at all, I'm loving it so far and looking forward to mastering it, but as a newbie I'd appreciate it if you could work on an instruction manual. And I'm sorry but the videos are absolutely terrible. You should really consider a series of videos with voice over instruction. The only decent video out there right now is on Matthew Woodward's blog. http://www.matthewwoodward.co.uk/reviews/licorne-aio-review-tutorial-how-to-use-it-like-a-pro/

/hattip sir!

 

[etudedecas]

Just tried Licorne following Matthew tutorial, I prefer senuke for the simple wizard support process, furthemore I need to retry account creation for increasing success rate which is still low with Licorne. Good but not yet as senuke for me, but certainly complementary tool with decent budget.

 

[licorne101]

It find over 30 EMD, but all of them was taken from over 1 year. On computer restart I get the same results.

The EMD checker works based on the rationale that the domain is deemed to be available if it is down at the point it is accessed. This is of course not the most reliable / accurate to check it but it is by far the easiest way to filter out unavailable domains.

A typical usage scenario for the EMD checker would be: insert keywords into EMD checker for filtering then send all "available domains" to godaddy bulk domain checker to get the most accurate domain availability results.

 

[Schvamp]

Okey I've run into some kind of problem here.

I cant create any projects, I fill in project name and click Add Project - Nothing happends, the window stay just like it is.
Proxies - I paste my proxies and click Add Proxies - Same, nothing happends.
Email - I type my email details and test it and it all works well - When saved, nothing happends, all details are gone and there are no emails in the list.

I've downloaded the recommended framework from your forum.

Any ideas?

 

[Resolution10]

Can a Custom Submission Task be added in the new update? That way I could simply go through all my lists and just select websites from all platforms based on different criteria (PR etc.).

 

[licorne101]

Okey I've run into some kind of problem here.

I cant create any projects, I fill in project name and click Add Project - Nothing happends, the window stay just like it is.
Proxies - I paste my proxies and click Add Proxies - Same, nothing happends.
Email - I type my email details and test it and it all works well - When saved, nothing happends, all details are gone and there are no emails in the list.

I've downloaded the recommended framework from your forum.

Any ideas?

Seems like your copy of LAIO is corrupted. Try redownloading a fresh copy from our forum and install it again. If the problem persists, please let us know by email ([email protected]) or by PM so we could assist you further.

Can a Custom Submission Task be added in the new update? That way I could simply go through all my lists and just select websites from all platforms based on different criteria (PR etc.).

Sounds like a very good suggestion. However it is not possible to include it into the coming update since everything has been nearly finalized by now and the suggestion requires quite some development effort. I will discuss this with the team later and if we feel that it is feasible to develop it, the earliest you will see this feature would be in somewhere near Sept.

 

[thomtin]

Hello there!

I was looking to scrape / submit to directories but couldn't find any preloaded , how come ? I need to scrape them myself ? what footprint do you use?

Also i was wondering when will be the next update since you were talking about it in the previous post ?

 

[tnhomestead]

Not sure if you can do this, but would be nice to be able to deactivate a license ourselves. Had installed one on my computer, and one on a vps, now want both on vps, and have to bother you to do it.

Not sure how your licensed if its feasable, something to think about.

 

[Schvamp]

Seems like your copy of LAIO is corrupted. Try redownloading a fresh copy from our forum and install it again. If the problem persists, please let us know by email ([email protected]) or by PM so we could assist you further.

I sent you a PM, you can ignore that now - I changed the prefs and now running it in windows XP sp3 mode and it seems to work fine (from w7).

Time to take it for a spin

 

[Bellcross]

Many of web2.0s will be fixed and added again in the next update.

Hi, do you have a list of some of the new 2.0s? The bigguns like wordpress and tumblr I assume, but what else? Will you continue to update support for them in the future?

Main thing keeping me on the fence about buying.

Thanks!

 

[licorne101]

Hello there!

I was looking to scrape / submit to directories but couldn't find any preloaded , how come ? I need to scrape them myself ? what footprint do you use?

Also i was wondering when will be the next update since you were talking about it in the previous post ?

You should be able to see about thousands of sites in the default list that comes with the software. If that is not the case, please redownload and install it again.

The footprints we use for scraping are also provided in the software. They can be accessed from tools -> Search Engine Scraper. Just click the Add / Edit footprints button and a folder containing all the footprints in .txt will appear.

Speaking of which, one very important thing to take note especially if you plan to perform heavy scraping is that you should always avoid using footprints with "Powered by" or "inurl:". Google is pretty sensitive with footprints with such keywords and your proxies will end up being banned very quickly if you use them.

Not sure if you can do this, but would be nice to be able to deactivate a license ourselves. Had installed one on my computer, and one on a vps, now want both on vps, and have to bother you to do it.

Not sure how your licensed if its feasable, something to think about.

Will definitely consider this suggestion.

I sent you a PM, you can ignore that now - I changed the prefs and now running it in windows XP sp3 mode and it seems to work fine (from w7).

Time to take it for a spin

Alright. Happy to hear that you got everything up and running. Give it a whirl and I'm sure you will love it.

Hi, do you have a list of some of the new 2.0s? The bigguns like wordpress and tumblr I assume, but what else? Will you continue to update support for them in the future?

Main thing keeping me on the fence about buying.

Thanks!

I do not have the exact list with me yet, but from what I could recall these are a few of them: wordpress, tumblr, thoughts, posterous, livejournal, netlog, xanga, zootoo, purevolume, jigsy and a couple more.

 

[thomtin]

You should be able to see about thousands of sites in the default list that comes with the software. If that is not the case, please redownload and install it again.

The footprints we use for scraping are also provided in the software. They can be accessed from tools -> Search Engine Scraper. Just click the Add / Edit footprints button and a folder containing all the footprints in .txt will appear.

Speaking of which, one very important thing to take note especially if you plan to perform heavy scraping is that you should always avoid using footprints with "Powered by" or "inurl:". Google is pretty sensitive with footprints with such keywords and your proxies will end up being banned very quickly if you use them.

3 questions :

1.Ok i had the Default list with many website but no directory i've dl the software again and i have them. But now i couldn't found how to import the website that i scraped and added to the new version ?

2.I'm also experiencing crash when important website on list < 50K ( 35k average ) , its crashing at 4.5k. is it normal ?

3. Can i use LAIO 1 , 2.5 and 3.0 at the same time to process more scrapped content and then import them to V.3.0 ? Because i'm very good on cpu and ram and its taking ages anyway.

Edit : i've found out i can import database so i should be able to do 3. , i'm wondering will the V1 have the same footprint in data for detection as v3 or will it miss website when analysing ?

 

[Bellcross]

I do not have the exact list with me yet, but from what I could recall these are a few of them: wordpress, tumblr, thoughts, posterous, livejournal, netlog, xanga, zootoo, purevolume, jigsy and a couple more.

Nice! It'll be hard to beat once you've got that all working.

One other quick question, on your sales page you say "for now there is no upgrade fee" - am I reading too much into the wording that you might have plans to charge to upgrade later? If so will that only apply to people who buy it after you announce that? Like I know UD only gives you upgrades for 2 years before they charge to upgrade, I think a lot of people overlook that, but they state it clearly on their sales page before buying so I have no issue with it.