Permanently Closed Marketplace Sales Thread
- Thread starter jamesvick
- Start date
- Status
toughtrasher
BANNED
- Nov 22, 2011
- 1,143
- 403
Are you serious? Worst support ever so far..
Sent an email regarding a refund around 3 days ago and didn'teven get a reply.
Call yourself a business?
Sent an email regarding a refund around 3 days ago and didn'teven get a reply.
Call yourself a business?
jamesvick
Senior Member
- Jul 26, 2010
- 998
- 701
in your last post you said you did not want to request a refund. Anyways tell me your email in PM and i will check it out. Also note that i don't handle refunds. Send an email to [email protected] with your order id. They will refund you.
Regards,
Regards,
D
Deleted member 36594
Guest
Hey bro,
I'm getting a fucked up error that I can't figure out. And it is NOT from your software, confirmed. Because this error message has been popping up whenever I use other softwares.
I'm getting a fucked up error that I can't figure out. And it is NOT from your software, confirmed. Because this error message has been popping up whenever I use other softwares.
Code:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.FileNotFoundException: Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
File name: 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
at System.ModuleHandle.ResolveMethod(Int32 methodToken, RuntimeTypeHandle* typeInstArgs, Int32 typeInstCount, RuntimeTypeHandle* methodInstArgs, Int32 methodInstCount)
at System.ModuleHandle.ResolveMethodHandle(Int32 methodToken, RuntimeTypeHandle[] typeInstantiationContext, RuntimeTypeHandle[] methodInstantiationContext)
at System.Reflection.CustomAttributeData..ctor(Module scope, CustomAttributeRecord caRecord)
at System.Reflection.CustomAttributeData.GetCustomAttributes(Module module, Int32 tkTarget)
at System.Reflection.CustomAttributeData.GetCustomAttributes(Assembly target)
at System.Resources.ResourceManager.GetNeutralResourcesLanguage(Assembly a, UltimateResourceFallbackLocation& fallbackLocation)
at System.Resources.ResourceManager.InternalGetResourceSet(CultureInfo culture, Boolean createIfNotExists, Boolean tryParents)
at System.Resources.ResourceManager.GetString(String name, CultureInfo culture)
at System.Resources.ResourceManager.GetString(String name)
at DevExpress.Utils.Localization.XtraResXLocalizer`1.GetLocalizedStringFromResources(T id)
at DevExpress.Utils.Localization.XtraResXLocalizer`1.GetLocalizedStringCore(T id)
at DevExpress.Utils.Localization.XtraResXLocalizer`1.GetLocalizedString(T id)
at DevExpress.XtraEditors.Container.ContainerHelper.ShowEditor(BaseEdit edit, Control container, Boolean checkForFocus)
at DevExpress.XtraBars.ViewInfo.BarSelectionInfo.ShowEditor(BarEditItemLink link, BaseEdit edit)
at DevExpress.XtraBars.BarEditItemLink.ShowLinkEditor(Boolean byMouse)
at DevExpress.XtraBars.BarEditItemLink.OnLinkAction(BarLinkAction action, Object actionArgs)
at DevExpress.XtraBars.BarItemLink.OnLinkActionCore(BarLinkAction action, Object actionArgs)
at DevExpress.XtraBars.ViewInfo.BarSelectionInfo.DoPressedLinkChanging(BarItemLink oldLink, BarItemLink newLink, Boolean isArrow)
at DevExpress.XtraBars.ViewInfo.BarSelectionInfo.PressLinkCore(BarItemLink link, Boolean isArrow)
at DevExpress.XtraBars.Ribbon.Handler.BaseRibbonHandler.OnPressItem(RibbonHitInfo hitInfo)
at DevExpress.XtraBars.Ribbon.Handler.RibbonHandler.OnPressItem(RibbonHitInfo hitInfo)
at DevExpress.XtraBars.Ribbon.Handler.BaseRibbonHandler.OnPressItem(DXMouseEventArgs e, RibbonHitInfo hitInfo)
at DevExpress.XtraBars.Ribbon.Handler.BaseRibbonHandler.OnPress(DXMouseEventArgs e, RibbonHitInfo hitInfo)
at DevExpress.XtraBars.Ribbon.Handler.RibbonHandler.OnPress(DXMouseEventArgs e, RibbonHitInfo hitInfo)
at DevExpress.XtraBars.Ribbon.Handler.BaseRibbonHandler.OnMouseDown(DXMouseEventArgs e)
at DevExpress.XtraBars.Ribbon.Handler.RibbonHandler.OnMouseDown(DXMouseEventArgs e)
at DevExpress.XtraBars.Ribbon.RibbonControl.OnMouseDown(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseDown(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at DevExpress.Utils.Controls.ControlBase.WndProc(Message& m)
at DevExpress.XtraBars.Ribbon.RibbonControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Wicked Article Creator
Assembly Version: 2.8.7.0
Win32 Version: 2.8.7.0
CodeBase: file:///C:/Program%20Files/WAC%20Systems/Wicked%20Article%20Creator/Wicked%20Article%20Creator/Wicked%20Article%20Creator.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
DevExpress.XtraEditors.v12.2
Assembly Version: 12.2.4.0
Win32 Version: 12.2.4.0
CodeBase: file:///C:/Program%20Files/WAC%20Systems/Wicked%20Article%20Creator/Wicked%20Article%20Creator/DevExpress.XtraEditors.v12.2.DLL
----------------------------------------
DevExpress.Utils.v12.2
Assembly Version: 12.2.4.0
Win32 Version: 12.2.4.0
CodeBase: file:///C:/Program%20Files/WAC%20Systems/Wicked%20Article%20Creator/Wicked%20Article%20Creator/DevExpress.Utils.v12.2.DLL
----------------------------------------
DevExpress.Data.v12.2
Assembly Version: 12.2.4.0
Win32 Version: 12.2.4.0
CodeBase: file:///C:/Program%20Files/WAC%20Systems/Wicked%20Article%20Creator/Wicked%20Article%20Creator/DevExpress.Data.v12.2.DLL
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
DevExpress.XtraBars.v12.2
Assembly Version: 12.2.4.0
Win32 Version: 12.2.4.0
CodeBase: file:///C:/Program%20Files/WAC%20Systems/Wicked%20Article%20Creator/Wicked%20Article%20Creator/DevExpress.XtraBars.v12.2.DLL
----------------------------------------
DevExpress.XtraNavBar.v12.2
Assembly Version: 12.2.4.0
Win32 Version: 12.2.4.0
CodeBase: file:///C:/Program%20Files/WAC%20Systems/Wicked%20Article%20Creator/Wicked%20Article%20Creator/DevExpress.XtraNavBar.v12.2.DLL
----------------------------------------
DevExpress.BonusSkins.v12.2
Assembly Version: 12.2.4.0
Win32 Version: 12.2.4.0
CodeBase: file:///C:/Program%20Files/WAC%20Systems/Wicked%20Article%20Creator/Wicked%20Article%20Creator/DevExpress.BonusSkins.v12.2.DLL
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
jamesvick
Senior Member
- Jul 26, 2010
- 998
- 701
Will answer in a moment.
Just a day more for final testing phase. I had to make few final changes before releasing it :
1) Allow people to build tier 1 articles from their own imported articles based on one-on-one spinning
2) Allow people to build tier 1 from only 100 articles
3) senuke, MS campaign individual tier 1 support and a possible contextual linking in the tier 1 article
4) My personal much awaited structure spinning method.
Regards,
jamesvick
Senior Member
- Jul 26, 2010
- 998
- 701
Hello,
just install .net framework 3.5 sp1 (specifically) and this will be fixed.
Regards,
jamesvick
Senior Member
- Jul 26, 2010
- 998
- 701
Just sent. Sorry about that. I was getting wait for 20 secs etc. and i forgot about it.
Regards,
jamesvick
Senior Member
- Jul 26, 2010
- 998
- 701
Hi,
1) There will be a tier 1 builder from articles on your HDD. You can use that. But please note that i cannot allow lower than that in main quick access panel as most of the users are heavy link builders. If the software builds an article from just 10-12 articles then it won't suffice in uniqueness for so many backlinks.
2) The upgrade pricing is $6x-$7x and not $8-$10.
Regards,
naskootbg
Senior Member
- Nov 8, 2010
- 847
- 280
Hi,
1) There will be a tier 1 builder from articles on your HDD. You can use that. But please note that i cannot allow lower than that in main quick access panel as most of the users are heavy link builders. If the software builds an article from just 10-12 articles then it won't suffice in uniqueness for so many backlinks.
2) The upgrade pricing is $6x-$7x and not $8-$10.
Regards,
EZA are already bombed from "heavy link builders" (sweet) from long, long time and this is the reason they add recaptcha
. This link builders are not WAC users only. Can we set at least minimum for tier1 content builder when scraping from the web?Also for the articles on my HDD - You will give us the full database of articles for $6.99 ?
Are articles created with this human readable and safe to use ?
What unique percentage you get from an article created for tier 1, and is something that worth add in your main site ?
What is bringing the new 3.0 in changelog ?
Is pricing increased for 3.0 (no eta release) ? Or I can wait for its release and buy it at the same 42 ?
You pay 42 and you need to pay more for an upgrade ? What is it about ? If there is an upgrade already can't we pay once as new costumers and see what is it about ?
What unique percentage you get from an article created for tier 1, and is something that worth add in your main site ?
What is bringing the new 3.0 in changelog ?
Is pricing increased for 3.0 (no eta release) ? Or I can wait for its release and buy it at the same 42 ?
You pay 42 and you need to pay more for an upgrade ? What is it about ? If there is an upgrade already can't we pay once as new costumers and see what is it about ?
Last edited:
jamesvick
Senior Member
- Jul 26, 2010
- 998
- 701
EZA are already bombed from "heavy link builders" (sweet) from long, long time and this is the reason they add recaptcha
Also for the articles on my HDD - You will give us the full database of articles for $6.99 ?
You see the fact that EZA gets many submissions and that too human written submission makes it very much better than any other directory out there. Obviously it takes measures to stop scripts from scraping it.
But i have been eyeing a new proxy software released at Wafo called dexter proxy. I did a split testing and i was amazed that it can get over 3000+ proxies to scrape ezine (and over 1000+ to scrape google) . Lol i can allow users to build their own database within minutes. Imagine 1000s of articles within seconds. Let's see if WAC gets any support for public proxies.
please read bottom post
Hi,
everything will be provided in basic version of WAC which costs $42. There are some modules which will remain in premium version to allow few people to get more power like Tier 1 article builder, GSA multiple projects builder (and faster too), tier 1 builder from your own imported articles etc. If you want these features then you buy full software for $97 or buy an upgrade for $59.
But most of my customers are more than satisfied with basic version. In beta versions very few have opted for it. These are basically seo providers or link builders (i know quite a lot of them).
So do not be worried about what comes in pricing. I will add way more features in basic version to keep everybody smiling
Hi James, have you considered a discount for your current customers? It would be a nice gesture for your long-time customers
Duh
. I will be sending an email with discount link but not everyone can avail it. Very few copies will be provided.Alrighty now for update notice. Update will be uploaded on 5 june 2013 and an email will be sent to all users about it. Here are the changes :
1) I have added tier 1 for all modules currently available in quick access panel (all 7) and all magic tools except super-spun (which will be deprecated soon)
2) I have added a new random function to make sure each module in senuke, MS and UD get new content and not single copied to all
3) A new premium tool tab has been added which will have hosts of tools - right now it has only one which is to build articles from your own imported articles in tier 1 manner
4) Pdf export option added to auto-build window in text article. Now you can export multiple PDF docs with unique content and a clickable link at bottom. You can use it to create PDFs for GSA or other tools.
5) Video spin module can now have your own links imported and spun (with bug fix)
6) Tier 1 settings reduced to 100 articles. I will allow you to build tier 1 from lesser number of articles too.
7) Also a semi-functioning module is ready for 6-7 other seo tools and networks. I will release them later.
Please note that this is final release of V 3.0 beta phase. After this there will be a forced update for all users and everyone will be asked to use 3.0 version. Note that we might just release 3.1 to make sure beta users also upgrade to a stable application. Let us know about any feature request and we will add it into WAC.
(We are close to solving language problems too with a enterprise level language translator
). We have spent a fortune on pdf component, article database and now the language translator so please do not think that we are just claiming to be looking after you. We Are !!After release it will be the same price ?
Full software for $97 - as new costumers, can we have a discount ?
I want it for tier 1... so basicly i need premium version .. you said : "1) I have added tier 1 for all modules currently" ... so that module is just for premium... right ?
If you get premium, you need to spend more on future modules, or any module released is on premium... ?
Full software for $97 - as new costumers, can we have a discount ?
I want it for tier 1... so basicly i need premium version .. you said : "1) I have added tier 1 for all modules currently" ... so that module is just for premium... right ?
If you get premium, you need to spend more on future modules, or any module released is on premium... ?
jamesvick
Senior Member
- Jul 26, 2010
- 998
- 701
Hi,
sorry but i cannot allow more discounts. It's already cheaper than other software with so many features. Nope after premium you do not pay any more for any module. All premium modules will be available for free for all paid users. You will not keep paying for every other module.
Regards,
- Status