Permanently Closed Marketplace Sales Thread

[licorne101]

Ok with the new updates there's some major problem with web 2.0 properties posting,everytime i signed up to those web 2.0 properites & then confirm emails.When I go to article submission task but after adding my article when i go to select my signed up accounts under the email.Even though it shows account been signed up successfully with their respective email/user name & password,when i try to select them nothing happens.No matter what I do I cant seem to select those account I signed up already for the posting.tried few times now & I did email verification several times but so far no success. Point to be noted here the previous version has no problem like that.Please look into it asap & help me resolve this issue.Thanks

This is not an issue, it is meant to be that way. Your accounts are not selectable because they are not meant for that task. You should be creating web 2.0 submission task instead of article's in order to be able to select and submit to web 2.0 sites.

 

[niroshana35]

I'm very interested about this software and want to try it before buy then I downloaded the 5 day trial from licorneaio web site but when I extract and run Licorne AIO.exe it gives an error "You must execute LAIO using updater.exe" and when I run updater nothing happens! I have Windows 7 on my PC, can you help with this issue please?

 

[licorne101]

I'm very interested about this software and want to try it before buy then I downloaded the 5 day trial from licorneaio web site but when I extract and run Licorne AIO.exe it gives an error "You must execute LAIO using updater.exe" and when I run updater nothing happens! I have Windows 7 on my PC, can you help with this issue please?

I'll shoot you a PM.

 

[niroshana35]

I'll shoot you a PM.

Thank you for the reply, I can't reply VIA PM on this forum (until I have more posts) I have to use forum reply like others do, I have downloaded the rar file and followed the instructions while running Updater.exe there were 5 popups and last one was checkpoint5, what should I do next? I'm happy to help, if is there anything else that I can do please let me know.

 

[SamTheMan26]

You can adjust retry failed settings in the settings window under General.

The ip: port format is only for PR checker. You can still use ip: port:username: pass format for the proxies in submitter.



I will shoot you a PM.

But how can I use private proxies to check for PR then?

 

[mikeydell]

Thank you for the reply, I can't reply VIA PM on this forum (until I have more posts) I have to use forum reply like others do, I have downloaded the rar file and followed the instructions while running Updater.exe there were 5 popups and last one was checkpoint5, what should I do next? I'm happy to help, if is there anything else that I can do please let me know.

Im having the same issue that your having on windows 7. Just give the support team a day or so and they will have it worked out. These guys are great with there support so no worries.

 

[indianagent]

I'll prob be getting this soon

 

[licorne101]

Thank you for the reply, I can't reply VIA PM on this forum (until I have more posts) I have to use forum reply like others do, I have downloaded the rar file and followed the instructions while running Updater.exe there were 5 popups and last one was checkpoint5, what should I do next? I'm happy to help, if is there anything else that I can do please let me know.

It seems that you are able to load the updater just fine, so the issue should be coming from the main executable. Since you are not able to respond to PM, please contact our support at [email protected] so we can send you a custom version of executable to further troubleshoot your issue.

But how can I use private proxies to check for PR then?

If your private proxies come in the format ip: port then you should still be able to check the PR without any issues. Private proxies in ip: port:user: pass on the other hand, will only be available in the coming update.

Im having the same issue that your having on windows 7. Just give the support team a day or so and they will have it worked out. These guys are great with there support so no worries.

Thanks for the good words! Will contact you again as soon as we are ready with the custom executable.

I'll prob be getting this soon

We look forward to having you onboard!

 

[mrorzio]

Anyone having any success training new platforms? i am willing to train it myself - Just want to know which to target.

I tried to train it to do Press Releases and couldn't


Let me know.

 

[niroshana35]

Im having the same issue that your having on windows 7. Just give the support team a day or so and they will have it worked out. These guys are great with there support so no worries.

Thanks for the words and I feel the same way you are, I analyzed Licorne AIO software update and new releases history just before I come here for there support and as I can see Licorne AIO software engineers and support team is doing a very impressive task by rapidly developing this great SEO tool while maintaining a very good customer service. If this trend continues Licorne AIO will be able to dominate all other best SEO tools on the market very soon.

 

[indianagent]

Will you guys be having a special anytime soon and lowering the price?

 

[xovian]

Can you guys have a link pyramid system built into your software? I'm tired of using other softwares like link wheel bandit.

I prefer everything in one app. I'm sure a lot of people would want this in your app.

Please let us know if you are upto to it. Your software will dominate all Seo apps if you have this feature.

 

[NadieComoPeter]

I'm very interested about this software and want to try it before buy then I downloaded the 5 day trial from licorneaio web site but when I extract and run Licorne AIO.exe it gives an error "You must execute LAIO using updater.exe" and when I run updater nothing happens! I have Windows 7 on my PC, can you help with this issue please?

to me it is the same

 

[francayma]

i have the same problem too, need to execute the updater.exe to run the program

 

[licorne101]

Will you guys be having a special anytime soon and lowering the price?

Yes we may have a limited time discount in the future.

Can you guys have a link pyramid system built into your software? I'm tired of using other softwares like link wheel bandit.

I prefer everything in one app. I'm sure a lot of people would want this in your app.

Please let us know if you are upto to it. Your software will dominate all Seo apps if you have this feature.

Something very similar to this (along with turbo wizard and task chaining) is actually being worked on. So stay tuned to our coming updates, many pleasant surprises on the way!

i have the same problem too, need to execute the updater.exe to run the program

It is meant to be that way and is completely fine as long as you are able to see LAIO after running it through the updater. What we are trying to do is to "force" everyone to check for update each time before the software is launched so you don't miss out any new updates.

If your LAIO does not appear after you double click on the Updater, it is likely that you are facing the issue similar to what Mikey and niroshare are currently experiencing. In that case please send us a PM or contact our support at [email protected] so we can look into your issue further.

 

[francayma]

"It is meant to be that way and is completely fine as long as you are able to see LAIO after running it through the updater. What we are trying to do is to "force" everyone to check for update each time before the software is launched so you don't miss out any new updates."

I see, but wouldn't be easier to get a pop up message once you open the program telling you if there is new updates avaliable?

 

[mrorzio]

Heard a few issues on here... updater is one that I don't know so please don't pm me.

My first question is - what version are you supposed to have. - click on bottom left of the Licorne app and it takes you to a page that tells you if you are up to date.

Next step - here is another process I used to rank a few sites using Licorne and scrapebox and some private proxies.

I pulled down a ton of list - every type available --

I would then run them through scrapebox to check PR. Then filter and keep PR 1 and above and named list - sb ran - run laio.
I then ran the site through tools on licorne - link analyzer.
Saved the CSV - deleted all no follows and then sorted and deleted high OBL's.
I would save this list and add to it each time - named it ready for laio high pr.
I then loaded the list into manage sites - add sites on Licorne. Named the list something I would remember.

I did this to over 2 millions sites so it took some time.

While doing this I also kept a Master CSV file of all do follow low OBL High PR.

I then created a few by hand - squidoo's etc...
I then took every link to my money sites - hand made web 2.0's - and created spintax around them.
I ran a week of creating accounts- constantly ran 24/7 just on account creation with over 35k sites.

Now I ran Licorne - various task that I run and link pyramids I created in the designer portion. Wiki's, directories, articles, web 2.0, bookmarks, etc... I saved all these links into a file called tier 1.
I then ran other task and some the same and pointed it to Tier 1 - building a pyramid to this link wheel I created. named this output file tier 2.

I then ran a ton of articles wikis and bookmarks at tier 2.

I can't train licorne so I did Press releases aimed at Tier 1 and Money sites by hand as well as RSS feeds. (i just haven't figure those out yet in licorne.)

Then I outsourced - manual blog commenting. I took that massive list and built 200 manual high pr low obl blog comments daily to all money sites and tier 1. They were randomly inserted into scrapebox as I provided the list but this happened for 30 days straight.

3 weeks after all of this - mind you I mostly built naked links with 20% being anchor text. I ranked number 4 for 5 keywords and 2 for another main one.

not bad for 400 dollars worth of content, software, proxies, and sites..

Yes you can contact me for more detail - I am perfecting this process and will post it in Licorne forum as I do with all my processes.

Yes I would sell my list but only to a select few and for premium dollars - premium... as it did take a long time to build and is my Money list for personal sites.

Hope you have fun!

 

[niroshana35]

to me it is the same

Thanks to Licorne AIO Support Team the error "You must execute LAIO using updater.exe" on Windows 7 is fixed now, for anyone who has the same issue try the following steps Licorne AIO Support suggested me to download and install this ".NET Framework 4" update from Microsoft website the URL is: [forum system doesn't allow me to publish the download URL copy this [/en-us/download/details.aspx?id=3556] and simply search on Google to get the correct download URL] >> Go to Microsoft download page First then Click download button then select the 29MB version and install it, after installing Licorne AIO V3 runs great on Windows 7.

 

[fsatark]

It is meant to be that way and is completely fine as long as you are able to see LAIO after running it through the updater. What we are trying to do is to "force" everyone to check for update each time before the software is launched so you don't miss out any new updates.

And what about me i don't like no-one to "force" me to update???????
Please... this is completely in sane!
I like to keep an old version! Why i have to "forced" use the new one, although i'm satisfy with the old one?

 

[licorne101]

"It is meant to be that way and is completely fine as long as you are able to see LAIO after running it through the updater. What we are trying to do is to "force" everyone to check for update each time before the software is launched so you don't miss out any new updates."

I see, but wouldn't be easier to get a pop up message once you open the program telling you if there is new updates avaliable?

Yeah that would be the ideal situation. However it is not practical as the updater needs to be a separate process in order to be able to replace the main executable.

Heard a few issues on here... updater is one that I don't know so please don't pm me.

My first question is - what version are you supposed to have. - click on bottom left of the Licorne app and it takes you to a page that tells you if you are up to date.

Next step - here is another process I used to rank a few sites using Licorne and scrapebox and some private proxies.

I pulled down a ton of list - every type available --

I would then run them through scrapebox to check PR. Then filter and keep PR 1 and above and named list - sb ran - run laio.
I then ran the site through tools on licorne - link analyzer.
Saved the CSV - deleted all no follows and then sorted and deleted high OBL's.
I would save this list and add to it each time - named it ready for laio high pr.
I then loaded the list into manage sites - add sites on Licorne. Named the list something I would remember.

I did this to over 2 millions sites so it took some time.

While doing this I also kept a Master CSV file of all do follow low OBL High PR.

I then created a few by hand - squidoo's etc...
I then took every link to my money sites - hand made web 2.0's - and created spintax around them.
I ran a week of creating accounts- constantly ran 24/7 just on account creation with over 35k sites.

Now I ran Licorne - various task that I run and link pyramids I created in the designer portion. Wiki's, directories, articles, web 2.0, bookmarks, etc... I saved all these links into a file called tier 1.
I then ran other task and some the same and pointed it to Tier 1 - building a pyramid to this link wheel I created. named this output file tier 2.

I then ran a ton of articles wikis and bookmarks at tier 2.

I can't train licorne so I did Press releases aimed at Tier 1 and Money sites by hand as well as RSS feeds. (i just haven't figure those out yet in licorne.)

Then I outsourced - manual blog commenting. I took that massive list and built 200 manual high pr low obl blog comments daily to all money sites and tier 1. They were randomly inserted into scrapebox as I provided the list but this happened for 30 days straight.

3 weeks after all of this - mind you I mostly built naked links with 20% being anchor text. I ranked number 4 for 5 keywords and 2 for another main one.

not bad for 400 dollars worth of content, software, proxies, and sites..

Yes you can contact me for more detail - I am perfecting this process and will post it in Licorne forum as I do with all my processes.

Yes I would sell my list but only to a select few and for premium dollars - premium... as it did take a long time to build and is my Money list for personal sites.

Hope you have fun!

Thanks for sharing those awesome tips mrozio!

Thanks to Licorne AIO Support Team the error "You must execute LAIO using updater.exe" on Windows 7 is fixed now, for anyone who has the same issue try the following steps Licorne AIO Support suggested me to download and install this ".NET Framework 4" update from Microsoft website the URL is: [forum system doesn't allow me to publish the download URL copy this [/en-us/download/details.aspx?id=3556] and simply search on Google to get the correct download URL] >> Go to Microsoft download page First then Click download button then select the 29MB version and install it, after installing Licorne AIO V3 runs great on Windows 7.

Yes, to whoever having the updater issue (LAIO does not appear after clicking updater),
please install both .NET Framework 4.0 and also the .NET Framework 4 update from http://blankrefer.com/?http://www.microsoft.com/en-us/download/details.aspx?id=3556.

If it still does not fix the issue, please let us know by sending us PM.

And what about me i don't like no-one to "force" me to update???????
Please... this is completely in sane!
I like to keep an old version! Why i have to "forced" use the new one, although i'm satisfy with the old one?

In that case you can opt to skip the update by clicking "No".